Well the weeds are sprayed and the grass is not tall enough to mow out in the fields so the Four Corners fencing project has begun this weekend. I spent a few hours on Saturday afternoon tearing out fences and wooden stays from the fence lines. I also developed a plan for redoing the fence. I cannot just tear into the ground as the telephone line is buried just outside the fence line and it is not buried 2-3 feet. It is only eight inches deep by our house so I am assuming it is fairly shallow here also.
Today Mr Professional came out and we went down and worked on the fencing all day. We took the trailer down filled with gravel, this was Mr Professional’s idea and proved to be useful as we are about 1/2 mile from the gravel pile and tractors are not exactly fast. We promptly broke out the bolts on the auger on the first hole. It appears that the hard pan is not very deep, about 18-24 inches down. We had to use the breaker bar to keep digging and we never did manage to break through the hard pan level. We just gave up on the digging once we got ”deep enough”. We started a small fire after we started to rip out the fence line and found scrap wood every where. We burned the weeds and a lot of the wood scraps. We managed to dig six holes with the auger and have five more to go. We are going to have to create a wash out area that lets the water run through/under the fence. I think we are going to have to use the old tires to keep the bull from just lifting the fence. He is so painful. We had to reinforce the culvert entrance on Tuesday as he had lifted the fence and went to see the neighbor’s heifers. Today we saw him trying to get through the culvert again but he cannot after our repair! He tried on three separate occasions throughout the day to get through to the other side with zero success.
We got the corner braces in and all tightened down. They look really good and our goal is to make the fence look very nice as everyone who drives by will see this addition. Once we have all the fence up we will take down the inner fence down by the willow trees and start to clear the flood debris out. It is a mess down there now. A few more days and we will get it done.
The spraying that was done two weeks ago is starting to come visible. I was spraying in front of the side by side and driving over the area so I could see where i was spraying. I started to notice some unintended consequences of that choice. Hopefully,, the grass will grow back without too much difficulty.
This was the last week of Zeke’s life. He was 10.5 years old and our very first Border Collie. He was free, which makes it even better. We had never trained a sheep dog before or owned a border collie but we figured we could watch enough videos and read enough books to get it done. We did get it done, but there were some hiccups along the way.
We tried to socialize him early when he was a puppy by taking him out into the barn that first winter. This did not work out so well for him, as one of the ewes took an instant distaste to him and proceeded to stomp on him or roll him every chance she got. Zeke took this personally and he remembered her until the day we got rid of her due to old age. If given the chance he would single her out of the herd just to chase her down and drag her to the ground. He did not ever forget that grudge. This philosophy was his life, if all went well and you treated him well, he treated you well. If you made his life miserable, he was not going to forget. The older he got the harder he was to take to the vet. He would snub all treats and growl at everyone whenever we took him in.
We did train him to work the sheep and eventually even the cows although he loved working the sheep more than the cows. The only real problem with his training was that it ended up becoming the R rated version of a working sheep dog’s commands. You could not have little kids within 1/2 mile of hearing range of me working the dog. He did great but he expected a certain kind of criticism while he was working and if he did not get it then that meant he could do whatever he wanted. Luckily, we are in the middle of a large open area and don’t have any close neighbors.
He had torn out a knee and was retired from animal working although he managed to work the sheep twice in his last week. I buried him in a rock cairn at the very top of the farm property. He is next to our chocolate lab. The view is spectacular and I think that I would like my ashes/compost (we have not decided which yet) up here with the dogs so I can look over the farm and wish everyone well and watch over the place. He will be missed.
We are going to wait until early summer to get a replacement. It seems soon but our other dog is 5 years old and it takes about 2-3 years to get a dog trained up well. If they are only able to work until about age 9 then that does not give us much time. Mouse also needs eye medicine to keep him from going blind so he might not make it to the 9 year mark. Zekee proved how invaluable a dog is to us when it comes to moving the farm animals around. We will never not have one as long as we have cows/sheep.
Well all good things must come to an end and I am no longer on vacation and am back to work. It has been busy so I was unable to post this on Sunday night. Annmarie got me to actually leave the house on Friday night and we went and visited friends and stayed the night. It was nice and now we are planning on them coming over to visit us.
Saturday when we got back we went right into sorting sheep. Our buyer from Elgin was coming over and we had to sort off his 20 lambs. They helped us sort everyone and we got theirs into the trailer and out the door. We now have our small herd of lambs out in the orchard. For some reason this year everyone has wanted a lamb. We have sold 13 lambs to local customers and 20 lambs to our Elgin contact. We have been discussing the prospect of expanding our sheep herd and shrinking the cow herd, the price of hay is going to determine what we do as it may not be cost effective to carry a bunch of cows through the winter. We then had to move the cows down to the lower pasture as they had laid over the fence and were walking around outside the fence. They thought they were starving. I did a 30 minute fix on the fence so the sheep could not get out and vowed to come back and fix the fence on Sunday.
On Sunday I went out to fix the laid over fence. This really meant that I had to dig and set eight wooden posts by hand as the fence was too close to the water to back the John Deere tractor up to the spot needing a hole. Instead I did it all by hand and even ended up putting a scoop of gravel behind every T-post to fill in the gap created by straightening the post. I had to tamp it all down to make the post rigid. I got all of them in but still need to repair one H brace as it is made out of round posts and one of them turned. This is of course the one with the chain gate tightener on it. This means the chain is so tight you cannot get it off to open the gate. Luckily, I don’t need the gate to open right now so this repair is going on the back burner.
Annmarie has started to work on the back garden and is getting things planted. We are going to have strawberries in one tower and herbs in the other. Currently, she is working out water inside the towers, the connections keep exploding and making a mess. She thinks she has a working plan now to fix it.
This week the weather has improved dramatically so the priorities have had to change a little. I wanted to get projects done that set up Mr Professional so he can come out and work alone when I am back to work. So lots of organizing, sorting and cleaning up has been happening. On Wednesday morning we sorted the sheep and pulled off the rest of the lambs. Not sure why I didn’t think of that the first time, but problem solved. We moved all the lambs but three over into the orchard pasture to hang out. I thought we only had three in with the ewes, we spotted a fourth one that evening when we were feeding, a little boy snuck past, he must have been hidden in a mass of ewes. The grass in that pasture is over eight inches tall and needs something to start eating it down so I don’t have to mow it. We want the babies close as they have a tendency to disappear due to predators. We let Zeke, our old border collie push the lambs through the yard into the orchard, he was very happy. All he did was walk up to them and lay down. He has been laying around a lot lately and has started not eating all of his meals. We are going to switch him to soft food to attempt to encourage him to eat. He is probably not going to make it through this year.
We went out to the machine shed and sorted through the piles of scrap wood we got a couple of years ago. It was leftovers we got for a steal and had it delivered right to the house which made it even a better deal. We are now starting to dig through and use the material for various projects around the house. But it was taking up space in the machine shed and we are going to make the old chicken coop the storage area. So we sorted out the junk. Sorted out the stuff we would use once for concrete forms, which are now stored outside the chicken coop and tarped, under the eaves, so we can have easy access to it when needed. We even kept the subflooring sheets and oak plywood sheets separately in the chicken coop so we can use them for the old house. The old bathroom is going to be Annmarie’s office storage room and it will get oak plywood flooring. The floors are slanted and will need to be leveled. The old kitchen, soon to be freezer room, will need to get leveled also but it will just be 3/4” subflooring and 1/2” plywood sheeting on it. We will just be sanding down the original floor like we did in our upstairs rooms in the house.
I took the time to brush the horse. She is shedding something fierce and without another horse buddy to help her groom she needs some assistance. I have brushed her twice this vacation and Sarah brushed out the dogs when she was home so everyone looks pretty good. We came into the house and took out the old TV stand. It is very heavy but Annmarie reminded us we have the shoulder furniture movers so we found those and it made moving the stand an easy thing. I moved the new chest into its spot after cleaning the floor and doing some cord management stuff to organize the electrical mess. Annmarie wants us to use a piece of plastic channel to contain all of the TV cords to make it neater. When that comes we will install it, it does look a lot nicer with the cords contained.
Mr Professional got the side by side up and running in under five minutes. This is without the battery being plugged in. Adding that large deep cycle battery under the driver’s seat was just what we needed to keep the thing going. A dead battery all the time is highly annoying.
The small stuff I ordered for the tractor came this week. The speed handle is installed! This should just come standard on every tractor, I am unsure why they don’t. There are a couple of tool racks that will hold a chain between them now mounted behind the seat on the roll bar. The chain is actually in one spot now not tied down to some random piece of the tractor. The quick hitch is now installed and I have filled the ballast box with horseshoes. So now the Kubota has pallet forks on the front and a ballast box on the back with several hundred pounds of steel in it. It feels a lot better when you are carrying something heavy on the front.
We let the new alpaca out of the orchard thinking that everyone seemed to be getting along. The old adage that fences make great neighbors is still true. By that afternoon Mad Max had the young brown one pinned to the ground and was screaming in his ear. I tried to holler at them to get them to stop but no go. I went over and encouraged him to get off of the baby and strained my right knee. He did not initially take the hint. The alpaca can be very stubborn or determined, depending on how you look at it. We watched them for a while and all seemed to be copacetic. The next morning when I went outside there was more fighting. I went out and chased away the offenders but I could only find the two new young white alpaca and only counted ten. Which meant that the young brown one was missing, but Mad Max was present but one of our other old brown alpaca was missing. I had to walk all the way down to the end of the driveway and found the poor little alpaca pinned to the ground and the older one on top grinding into him. I had to chase him off with my coffee cup as a tool, my knee still hurts so no kicking. When I got back to the now 12 alpaca I wanted to put the three babies back into the orchard with the lambs. But they kept walking away from me. So instead when I opened the gate the seven older ones bum rushed the open gate and went into the orchard. So now the new animals are outside the fence and the old grumpy men are stuck in the orchard. Mad Max is now with the young ones but he has not been any trouble since the split. So now Annmarie asked me if I verified the gender on all three new alpaca. I did not do that. So now we need to verify that we did not end up with a female as we really do not want any cria.
On Thursday we got the side by side ready to spray. I put the first 30 gallons of round up through just spraying our road and driveway down. The only bad part about roundup is it takes at least a week before you can tell something was sprayed and two weeks for it to totally die. We cleaned out the tank and Mr Professional sprayed field #5 & 5A with 2-4-D & Milestone to kill the broadleafs, the thistles are already starting to spread. Unfortunately, the flood from two years ago changed the direction of the creek and one of the tall banks is seriously undercut. We have probably already lost eight feet of hillside and may lose another eight feet. If we lose that total 16’ I will have to move the fence. There is a very large curve in the creek now. We finished cleaning up and tossing everything onto the burn pile. I will need to get that burned again in the next month.
The big push now will be to get the spray onto all of the hay fields. We need to do this as soon as possible and then once that is done we can start fixing the fence down by four corners. As soon as that fence is done then it will be repairs on the hay baler and getting all the tractors tuned up and oil changed so everything is ready for haying season. We will be getting the barns cleaned out also so we have a place to put the new good hay.
We spent most of Monday getting the black walnut tree cut up into boards and a mantle. I am not yet sure what to do with the mantle but if you know someone who needs a 9 foot long, 12×20” piece of black walnut with one live edge still attached let me know. I have it stashed in the machine shed under a tarp to keep it clean. The rest of the lumber we took out to the now clean old chicken coop, stacked and stickered it, then banded it all together to help keep it flat while it dries out the last little bit. The tree had been dead for a few years already so it should not take several years. The wife and I discussed the barn lot crossing and the cost of a new culvert. It was going to be $1800-2000 for a new 3 or 4 foot diameter culvert. Annmarie pointed out that I could just make a buttresses on each side and deck the gap with railroad ties and anything would be able to drive over it. So the new plan is to make two concrete U shaped ends and then bridge the gap with railroad ties. This will be easier than trying to purchase new culvert and will have the added benefit of creating a lot of space for water should it try and flood again in our lifetime.
Mr Professional and I put up clear plastic on one of the wall openings in the back of the old chicken coop. We did this so the light could still come in. The front part of the coop is about 33 feet long so we sheeted it in plastic and then put up OSB board to sandwich the plastic between the board and the chicken wire already stretched across the windows. We sealed up two different animal access points and now nothing can get into the old chicken coop but mice. I will need to put out a lot of poison now to prevent the mice from taking up residence. One of the cats had been keeping the room clear of mice, we knew this because there was some untouched grass seed in the building. After we got the windows covered we cleaned up and were ready to move the stuff from the old house out to the chicken coop for storage purposes.
Today, before Mr Professional came out I went upstairs and stained the second side of the bathroom door. I will seal it tomorrow and then it will be ready to install. Mr Professional had told me that one of the lambs was limping last night when we fed. So this morning I went out and cut a short length of PVC pipe, I then split it in half lengthwise. Once I had it split I filed down all of the edges to make them rounded and took a roll of coban and the splint out to the barn with me when I went to let everyone out. I managed to find a boy lamb who was limping, caught him and after everyone left the barn I was able to set him on his butt and wrap up this leg and splint it with the coban and PVC. It worked well, the only real problem was it took the lamb some time to get used to it and I found another boy lamb that was limping and had a floppy front leg. So now I will need to make another splint in the morning and splint the second lamb’s leg. I have no idea where the idiots are injuring themselves.
So Mr Professional and I sat down to discuss the new plan, we calculated how much rebar we would need and we picked it up today from the scrap yard. This is the new engineer approved plan. I am going to borrow a dump trailer and pickup the 3/4minus and concrete sand myself and take it right to the job site and dump it all within arms reach of where we need it. We can get power to the bridge with three extension cords and will mix it all right there. I just need to get the Portland Cement and lime now. It needs to warm up quite a bit so the water level will drop some before we get started.
We started cleaning out the old house to get ready for the office build. This is a perfect project to work on due to the frequent rain. It took two full 16’ flat bed trips to empty the two rooms out! There was quite a bit of unused wood stored in the old house. I am thinking about moving all of the unused wood from the machine shed into the old chicken coop so that all of the wood is in one spot. We are going to tear out the entire inner wall so I can run all new electrical wire quickly and easily using the least amount of wire. Luckily, I have quite a bit of 12 g wire leftover from wiring our house so I think I already have what I need. I also have a variety of switches and outlets, all different colors and types but I am determined to use up what I have on hand before I get any new supplies.
We used the tractor to move the trailer and it is a lot easier to maneuver the trailer. We got the first load into the old chicken coop but by yesterday evening we did not want to unload the trailer so we just tossed a tarp over it and started to work on covering up the access hole in the side of the building. This hole has been uncovered since we moved here and Annmarie has wanted it covered forever. We also slapped a couple of pieces of wood at the peak and even added an extra piece as a woodpecker has decided to put a hole in the building so it can nest in the attic. The freezer room is just going to get the floor leveled and power installed for now. It is outside the office area we are building for Annmarie and is in my section of the building. The second section will be done at a later date, most likely after we get the inside bathroom remodeled. Once the walls are stripped I will get two doors ordered and three windows. But the wiring can be done while that stuff is getting ordered and shipped.