Last week on Sunday was my catchup day. I was able to get the trailer tires loaded into the pickup and ready to go to town to fix all three flats, sitting is bad for tires. I will get them repaired and then reinstalled and the trailer will be ready to go to Lagrande Thursday morning bright and early. This will be my first trip over Cabbage Hill hauling a horse trailer. I know this sounds innocuous, hauling a horse trailer, but for those that do not know Cabbage Hill is the steepest and longest grade west of the Mississippi. The length is what gets most people, especially semi trucks. It is also a major thoroughfare for crossing the upper part of the United States when traveling from Coast to Coast. After having two overloaded trailers almost flip me in the pickup I am getting a little gun shy about traveling long distances with a heavy load.
I went out to work on doing my part of the spraying. Mr Rainman has been making great progress. The weather was perfect and I sometimes forget how nice it is to just go around in circles in a green field on a sunny cool day. It was amazing. I noticed that the sprayer boom was bouncing around quite a bit. The arms are designed to bounce up and break away backwards if you hit something. I thought I had better look at it. I stopped spraying and noticed that the nozzles were tilted. Turns out the steel tabs holding the boom had broken on one side of the drilled hole.
I decided that it was going to fail soon and needed to be fixed. This meant breaking out the welder! I passed the class at the local community college with a B (an A for all written tests and C for all actual welding). After much practice and discussion with the welding instructor it was determined that I just needed to be able to weld a strong weld on the farm and beauty was going to be nonexistent. I am okay with that as long as the weld holds. So I went back to the machine shed, laid out all the tools and found a piece of scrap iron. I cleaned up the area with a wire wheel grinder. Cut two triangles out of steel and the proceeded to weld on a cross vibration support and welded the breaks on both sides. Not sure when they designed it why they did not do that initially. It needs it if you plan on using it to spray 30-50 acres 2-3/year. I even shot some paint on it when I was done to slow down the rust.
Stewart Creek Somethings 