Month: May 2023

Cow sorting gone bad

Steve HardinLeave a comment

I was up early, ready to go out and load the steer at 0730. We had kept him in the corral for the last two day so we would not have to sort everyone. Sorting can take 2-3 hours on a good day. We had even kept the dogs in the back yard, otherwise they can get right next to the corral and harass the animals. We had let the sheep back out into our yard for one day and then I pushed them over into our orchard area. The orchard area is getting tall and I did not want them to knock the clover back down. Even though it had already grown about two inches since the last time they had been on it. It grows pretty aggressively when it is grazed on. The yard is a little out of control, the sheep may have to come back in soon so I can be eco friendly and not run the gas powered lawn mower! The trade off is you have to dodge sheep poop on your way to the front door.

The customer came with a horse trailer. It had a solid door on the back that was much wider than the opening of the chute. I figured if we backed up on one corner then got the cow in we could pull forward and quickly shut the gate. I backed him up to the corral and there was about an eight inch gap. Annmarie came out to the yard and the dogs got out, Chance was still pissed about getting rolled two days ago and just started tearing it up, barking and running the length of the corral and trying to get through the fence into the corral. She would not give it up, or listen to us. I had to catch her and Annmarie drug her off by the collar to the back yard. She listens when she is on the lead, but not off when we are around livestock. She will listen off leash now to us but now we have to get her “off” switch wired so she will drop down no matter what is going on around her. This is harder than you think to teach. It means constantly exerting your will over the little things so she learns to just obey on command. It takes time.

Cow top left of picture, me from road on tractor, not where it belongs

I had money in my pocket from the sale and we loaded the cow. It went into the trailer then I shut the chute gate so it would not get out and it spotted the 8” opening. Once it had its head through it was all over! It got stuck twice but just kept bucking and hollering and got through in about 15 seconds. I rearranged the barn lot gates so we could just push it back into the lot and try again. I went and got the tractor to shoo it back toward the now opened gates. It jumped the fence into the fallow wheat field. I had to drive down to the corner then up the road then out into the wheat field. Annmarie had to come out with Chance and open the gate out into the wheat field. I was just going to drive the cow along the fence line to the gate. The crazy cow was not scared of the tractor and I had to keep blocking the fence line with the bucket to keep it from going past me. This worked until it jumped the fence back into the main house area, Chance was involved now and then it eventually jumped the fence again into the small seven acre fallow field, then jumped back into our main pasture area by the school house. I went to go talk to the buyer while she did the chasing into the school house field.

Chance (1 year old puppy) is the white Border Collie, Mouse is the grey/white one

I gave him his money back then we discussed options. I told him that if he called around and could get a carcass cut and wrapped that 243 therapy and assistance in cleaning and skinning would be available but he was going to have to plan on a few hours to do that hard work. Damn cows! He left without a cow and us without any money. He will reach out next week after making some enquiries.

I spent the rest of the day assembling a new bee hive. We purchased it before I knew about someone else wanting to get rid of their two hives. So now we have four full hives and a bunch of extras. I am going to have to clean up an area for all the extra bee supplies. I am thinking about moving the old lamb shed and creating a clean sub room inside it. I can use an old road side billboard sheet. They are fairly inexpensive, line the entire inside of the room, seal the edges and put in an airtight door. I will have to look into this more. I have a lot of extra stuff laying around and if I cobbled it all together I think I could do it fairly cheap.

Moving cows is never easy, no matter what

Steve Hardin1 Comment

Mr Rainman came out this week and finished spraying all the major fields. He has been backpack spraying the difficult to reach areas and still has more of this to do but I think he can be done in less than two days and will have gotten most of the farm, even the difficult to reach areas.

I came home early on Wednesday so that we could sort cows for butchering. It turned into sorting off six month old calves, sorting out 5 kill size cows and moving the old bull. This was going fairly smooth. I say that loosely as sorting any live animal does have its challenges. Mr Rainman is not a cow person, even really an animal and every time I got in the corral to walk around and sort out 12 jumpy horned cows he would squeal and get nervous. All was going well, I had placed Chance (1 year old border collie) on a 30’ lead and she was doing well. We are working on “down” command at any time and “left” and “right” commands. We only use “circle around”, “to Me”, “guard”(creates dog gate), “away”. “Stay” and “easy”. Those are the main ones, we do realize there are a lot more commands but over the years these are the ones we use. The only other thing is they have to learn to work in the barn with mommas and babies and to stay and allow the lambs to pass or sniff at them.

Once we had the cows in the barn lot, I tied Chance to the gate so the cows would not try and push on it and then we proceeded to push them into the corral for sorting. Everything was going smoothly (first indicator you are about to be in trouble) when one of the slaughter size cows reached the corner gate chain and lifted it off its anchor slot and pushed the gate open and got back in with the main herd. We finished sorting all the rest of the cows and even moved the weanlings off to the third holding pen so we could still use the main two and chute. We tried to push the herd back into the corral and they did not want to go especially the one we wanted. So I grabbed Chance and we pushed them into the corral. She got rolled twice by the cows, but she just jumped up and got right back at it. We pushed the cows in and I ran our target into the chute after he tried to climb the five foot corral fence. I failed to notice that I had left the sheep ramp in the chute. It is for running the sheep into the back of the pickup. It was leaning on the exit gate with about a 60 degree angle and the steer ran right up that ramp and jumped off it from five feet in the air. So we spent 30 minutes getting him back into the pen and in with the four sale cows. We never could have done this without Chance. We sorted off one steer (not crazy one) for someone to come pickup on Saturday morning (next warning sign). We would keep him in the corral for a couple of days until he could be picked up. The bull went into the corral to spend the night. He is so placid you literally have to go up and nudge him in the direction you want him to go.

I get up bright and early so I can be in Lagrande by 0730. Annmarie comes out to help me, the first four just go right into our livestock trailer. I try and run the bull through the chute but he keeps dragging his horns and having to turn his head. He is 13 or 14 years old and has a very large head and decent horns. So we let him back into the corral and Annmarie suggests just backing the trailer into the pen, opening the entire back and getting him to just walk into it by himself. We do this and he is coaxed in under five minutes. He is so calm.

I am off early around 0530, I adjust the trailer brakes and start the trip. I am going 55 mph and it feels fine. I get on the freeway and keep it at 55 mph, I can feel the animals moving around in the trailer. I creep up Cabbage hill at 45 mph. Honestly, except for my nervousness it is going well until I start coming down the hill on the backside. The whole rig starts shaking every time I hit the brakes over 50 mph. It did not do this on the flats. So more white knuckled driving and I pull in to Hines meat. I was there before the place was open. The guy comes out, compliments the bull on how good looking he is and we try and unload them. We got them unloaded but of course they did not want to comply.

When Hines called back this weekend to give weights on the cows they said there was one “surly” cow that gave them some trouble. Wanna guess who that was? Due to the small stature of a Dexter cow you get a lean meat and much smaller steaks. The carcass weights came in at 327#, 332#, 320#, 313# and the bull at 673#. The bull went to all hamburger. We are charging $3.50/lb hanging weight now. The average for our area is around $4-4.50/lb hanging weight.

On the trailer trip home I just dropped the horse trailer off at the tire place and asked them to balance all tires, check brakes and pack wheel bearings. The lights worked great!

Beautiful day

Steve HardinLeave a comment

Last week on Sunday was my catchup day. I was able to get the trailer tires loaded into the pickup and ready to go to town to fix all three flats, sitting is bad for tires. I will get them repaired and then reinstalled and the trailer will be ready to go to Lagrande Thursday morning bright and early. This will be my first trip over Cabbage Hill hauling a horse trailer. I know this sounds innocuous, hauling a horse trailer, but for those that do not know Cabbage Hill is the steepest and longest grade west of the Mississippi. The length is what gets most people, especially semi trucks. It is also a major thoroughfare for crossing the upper part of the United States when traveling from Coast to Coast. After having two overloaded trailers almost flip me in the pickup I am getting a little gun shy about traveling long distances with a heavy load.

I went out to work on doing my part of the spraying. Mr Rainman has been making great progress. The weather was perfect and I sometimes forget how nice it is to just go around in circles in a green field on a sunny cool day. It was amazing. I noticed that the sprayer boom was bouncing around quite a bit. The arms are designed to bounce up and break away backwards if you hit something. I thought I had better look at it. I stopped spraying and noticed that the nozzles were tilted. Turns out the steel tabs holding the boom had broken on one side of the drilled hole.

I decided that it was going to fail soon and needed to be fixed. This meant breaking out the welder! I passed the class at the local community college with a B (an A for all written tests and C for all actual welding). After much practice and discussion with the welding instructor it was determined that I just needed to be able to weld a strong weld on the farm and beauty was going to be nonexistent. I am okay with that as long as the weld holds. So I went back to the machine shed, laid out all the tools and found a piece of scrap iron. I cleaned up the area with a wire wheel grinder. Cut two triangles out of steel and the proceeded to weld on a cross vibration support and welded the breaks on both sides. Not sure when they designed it why they did not do that initially. It needs it if you plan on using it to spray 30-50 acres 2-3/year. I even shot some paint on it when I was done to slow down the rust.