The big obstacle after breaking my foot was going to be getting the rest of the hay baled and then put up in the barn. The day after I broke my foot the baler broke, it is skipping a drive chain due to all the wear on the gears, the gears need replaced, adjusting the chain length and tension is no longer working. That same afternoon the John Deere tractor blew out seal and quit moving due to a malfunction in the front right steering mechanism. Turns out this is a common issue and a design defect that eventually rears its ugly head. The tractor is over ten years old and has been used hard, It has over 2000 hours on it. Due to it not being able to move they had to come out and pull off the assembly. This took about a week to fix but the cost went from $2000 to $4100. This is a lot cheaper than a new tractor but not pleasant. Especially, when you consider I had to order parts for the baler.
The baler is an Abbriata, made in Italy and really only one dealer carries parts in the United States. When I called to order parts the first time I learned that the company no longer sells this brand small round baler. Abbriata was sold recently and the prices jumped almost 50%. So my $13k baler is now $20k. This made it easy to order replacement parts. I got roller gears and chain ordered then the next day remembered that we forgot to order the small gears. I called back and got the same service representative and those got ordered, I now have $2k worth of spare parts coming for the baler. On the plus side, I will be able to sit in a chair and help direct the baler repair. I am getting used to working on it even if I don’t like it.
The Go Getter, Mr Rainman and the former Gimp, now called the Mermaid volunteered to help me bring in bales. (The Gimp made an argument for a name change. Normally, I don’t do name changes for the blog but she was compelling and she stated that a Gimp could not pickup hay and that currently I was the Gimp. It made sense in a convoluted way and she was correct as I was wearing the walking boot not her.) This made me the designated driver but since we were starting first thing in the morning and I could only use one foot to operate the gas and brake simultaneously the first trip was a little jerky jerky and I killed it about ten times before the engine warmed up and I did not have to keep my foot on the gas 100% of the time. We managed to pickup four loads (by we, I mean that the puppy, Milo, and I watched while everyone else did the hard work). It was a Friday so he had to come with me so the siding guy could use the boom without fear of driving over the puppy.
Luckily, the Gingerman offered to come down the next weekend and rake and bale the hay we had down. It took a solid day but he was able to bale around 150 square bales equivalent to 6 tons of grass hay.
Mr Rainman, the Go Getter and Mr Second Career came over during the week and picked up more bales in an attempt to get them out of the fields. Mr Second Career had borrowed the Kubota to mow down weeds and volunteered to help pickup hay. The Go Getter just feels sorry for me and volunteered to bale me out. They got most of the hay into the barn or lamb shed. The square bales are a lot heavier so they went into the lamb shed as they are easier to load and don’t get stacked as high.
The Gingerman tells me there are about 70 round bales in field one still to pickup. He thinks he can do it on Monday. Once that is done we will only have the orchard to mow and rake. I think we will just pick it up loose and feed the alpaca. The last bit down by the school house is about 25-35 bales only. But we have to have the round baler working and the small sickle bar mower working. Both spaces are very small and tight and need the small equipment to be able to fit. This won’t happen until after Fourth of July. I am unable to help with this issue.
Stewart Creek Somethings 