Well it’s that time again, time to actually go back to an old project and try to get it closer to the finish line. The bathroom is totally functional at this point. Never mind that there is no storage or that we cannot hide electronics. The shower has hot water that gets you clean, the sink dispenses water and the toilet flushes, the crucial tasks can be checked off the list. It was going to rain on Sunday so I decided to start in on the custom bathroom cabinet. I bought furniture grade 3/4” oak plywood at a paltry $95/sheet. I was disappointed to learn that it was necessary to trim all of the edges of the plywood to get rid of the damage on the edges. I don’t have a furniture grade table saw so I found this guide rail and put an expensive blade on my DeWalt skilsaw and made the first cut. I then had to go back and tape the edge I wanted to cut and cut through it again to get a clean cut. The first cut still caused some tear out on the laminate.
My goal is to get all of the pieces cut, then sand them all, then assemble them. I will stain it once I get it assembled. I am going to just go with the Tried and True finish. I like it and it tolerates moisture fairly well.
The guide rail did okay but I will need to run the pieces through a table saw. I have about a 1/8” difference near the middle. I need an expensive guide not a $30 guide if I want a perfectly straight edge. I did this a couple of weeks ago and have only managed to get most of the small pieces cut since then. I need some help getting the table saw down and running them through, Gingerman has agreed to help but our schedules have not been coinciding recently. I am working intermittent random nights for the last month with another month to go and it is really slowing down my projects. You tend to want to sleep the next day after being up all night.
Stewart Creek Somethings 