Lambing update week 7

This weekend I had to spend some quality time in the barn again. The mother/lamb area needed to be expanded. It now covers 2/3 of the barn. The rope we used to tie one side of the creep gate in place is getting stretched by the ewes and the thin ewes are able to crawl through the side. This morning one of the ewes was stuck in the creep gate. She got stuck right in front of her back hips and could not move. I had to pull the pins out of the gate and drag her back out. It took her about ten minutes to get her sea legs under her. Her lamb was glad to see her and kept nursing as much as it could. This has prompted us to get bigger eyelets so that we can stick a 1” rod down through the right side of the gate. We are out of the skinny rods so the bigger aluminum ones need to be used. I am afraid to use an eyelet that just gets screwed into the wood. I am afraid the ewes will just tear it out by pushing on the gate. I had four of them pushing on it Saturday as they were able to get their noses into one of the feeders. They could barely reach it with their tongues but they were not giving it up! I had to lean over the gate and hang in the air to push it away from them. They would not let me pass. I have a bolt on eyebolt that will fit and now just need to install it.

We are now certain that a second ram is needed. We have been lambing for seven weeks and we are still not done. So this spring we are going to keep the sheep in a small contained area when we introduce the ram. NO more letting the sheep run over 40 acres and the ram having to chase them all down.

  • Date of update- Mar 12, 2023
  • # of Lambs born – 48
  • # of ewes who have delivered babies – 30
  • # of ewes still pregnant – 12 in area, I don’t think they are all pregnant
  • # of single lamb births – 13
  • # of twin lamb births – 16
  • # of triplet lamb births – 1
  • # of bummer lambs – 5
  • # of lambs who died in first two weeks – 3
  • Total # of lambs on farm -40
  • % birthing rate- 160%
  • % production rate -133%
  • % survival rate at birth – 100%
  • % survival rate at 2 weeks (bummers count as death as they need help and leave the farm) – 83%

We had one of the traveling staff from Florida come out for a few hours on Friday and see the lambs and ewes. She got to pet everyone and tour the house. We then fed her leg of lamb for dinner! It was amazing as always. She wore her snow boots out in the barn. Being a city slicker she had never seen anything like it before. She kept marveling at the fact that there were no neighbors.

Minutiae abounds

It’s been a long week and it Mother Nature cannot decide what she wants to do. It was clear and warming up at the beginning of the week, now there is snow on the ground and snowing again, we have about two inches on the ground currently. Annmarie has been using her office! I have been slowly putting little things in place. I got our old dining room table in there and we used some table elevators to lift it two inches so we could slide the smaller sorting bins under it. There are now six bins under the table. The new cable for the router came so I will be installing that soon and finishing up the corner trim to hide the cables. Gizmo has a new doggie bed, he didn’t like the old one it was too small for him he thought. Annmarie needs to start bringing out books but she is going to sort them first and thin them out. So I have resisted the temptation to remove them from our bedroom. I would like to see them thinned out also. There is a small table down at her mom’s that she wants me to retrieve and refinish. It has marker, paint and nail polish on it I think. It was from a long time ago when Sarah was a menace. She wants it to go in front of the couch.

I messed up last week and should have kept the two ewes and three lambs in the same pen I had them in when sorting them. I sorted the wrong babies but I did watch them nurse. The trouble was two days later both ewes were head butting the lambs and refusing to let them nurse. Unfortunately, in two days we ended up with three more bummers and another death. No clue why the lamb died, it may have been suffocated by its mother. We have been supplementing grain since the babies have popped out. The ewes are getting mighty skinny. We will be worming them again next week. We wanted to let them have the babies and have the babies be a little older. Last year our weight loss was due to worms. So we treated in the fall and are going to treat again in the early spring/late winter. I just need to verify we have enough medicine to treat all of the ewes.

We have been having a hard time finding bagged sheep feed. We keep looking but everyone else is looking and buying before us. I went ahead and reserved all of the lamb feed coming in this week so we can keep feeding the lambs using our creep gate. We figure if we can get the lambs to eat solid food they will take less calories away from the mothers. I worked on getting the creep gate installed in the opening of the pen under the stairs. I am not sure why we never thought of this before. I put in four eyelets and was able to attach it to one side with a metal pin. I need to get longer eyelets for the other side. I forgot it is a piece of rough cut lumber so its about 2.25” wide. My eyebolt was too short so I had to use the one inch piece next to it and tie on clips to the gate. The gate is not rigid but it does move around, about three inches, until I can get the new eyebolts installed. This movement does not seem to bother the lambs. They get in and out just fine.

I had to go in and pickup some lumber for the barn doors in the office so I grabbed enough to do the frames for the bathroom closet. I did one frame out of 1×4” boards but Annmarie thought it was too heavy. It is solid, no doubt about that. So I picked up a bunch of 1×2” boards to make new frames. I was not sure if my Kreg tool would do this thin of wood but I had no trouble drilling angled holes and assembling the frame with screws. I had to install three pieces on the front of the doors to attach magnets. Once I get all of the frames built I will need to cover up the outer edges of the closet with blue tape and then clamp each frame in place and drill a small hole through the frame and into the closet opening. This will mark my spot to drill the sink holes for the magnets that need to be installed on each side. The blue tape will help protect the wood and let me draw on the frame to mark their proper location.

Lambing update fifth week

Well our annual second winter came this week. We got about eight inches of snow and the temperature dropped into the single digits. The cows were happy I took them another big bale of hay. I fed out two more big bales this morning and only have five big bales left. I have half the barn and the machine shed full of 40# round bales that can be fed out! Once I get all the big bales fed I can let the cows into that four acre area. No animal has been in there to graze since last fall so with a little warm weather that area will perk up quite nicely and allow for some decent grazing.

This weekend some time had to be devoted to the sheep again. We have to get the ewes and babies in the jugs tagged and banded so we can make room for more babies. Currently we only have two jugs open. I think I can tag and band the single under the stairs and the other single. Both of those babies are healthy and moving around well. It gets a lot harder to find mom when there are 25 other screaming little lambs running around.

Yesterday morning I had three different sets of babies in the barn. I was able to let everyone out but those thee ewes and their babies. One of the ewes was crazy! I know this because after 20 minutes I had still not managed to trap her in a jug. I also noticed she had a notch out of the no ear tag ear. I have a notcher for marking the bad ewes. I almost never use it as I don’t like it, but this ewe is getting another notch and we need to cull her. I ended up trapping her in the chute then opening up the barn side of the chute and chasing her into the jug under the stairs. This worked surprisingly well. It did require moving stuff around but in the long run it would have saved me time. I had a set of twins and a single in with the two ewes. When I separated the ewes I must have messed up. I went out there this am and the dark black ewe was head butting both of the pure white babies I had in the pen with her. So I swapped babies and will need to go out later and see how the babies are doing. When I swapped them out the mothers went right up and were sniffing the babies. Yesterday the ewes were eating and they let the babies nurse. So I could not tell who belonged to whom.

  • Date of update- Feb 26, 2023
  • # of Lambs born – 41
  • # of ewes who have delivered babies – 25
  • # of ewes still pregnant – 16-18 in area, I don’t think they are all pregnant
  • # of single lamb births – 10
  • # of twin lamb births – 14
  • # of triplet lamb births – 1
  • # tagged male (weathers-neutered) lambs-13
  • # tagged female lambs-13
  • # of bummer lambs – 2
  • # of lambs who died in first two weeks – 2
  • Total # of lambs on farm -37
  • % birthing rate- 164%
  • % production rate -148%
  • % survival rate at birth – 100%
  • % survival rate at 2 weeks (bummers count as death as they need help and leave the farm) – 90%

The ram and his cronies got out of Alcatraz this week. I am pretty sure they got out through the lamb shed. I did not reinstall the gate in front of the barn after it got knocked off last summer. Not only do I need to reinstall the gate but I need to mount a cattle panel onto it so the sheep cannot pass through the bars. I managed to lure them back with grain and used the horseshoe door anchor in addition to the clip.

Lambing update fifth week

Well our annual second winter came this week. We got about eight inches of snow and the temperature dropped into the single digits. The cows were happy I took them another big bale of hay. I fed out two more big bales this morning and only have five big bales left. I have half the barn and the machine shed full of 40# round bales that can be fed out! Once I get all the big bales fed I can let the cows into that four acre area. No animal has been in there to graze since last fall so with a little warm weather that area will perk up quite nicely and allow for some decent grazing.

This weekend some time had to be devoted to the sheep again. We have to get the ewes and babies in the jugs tagged and banded so we can make room for more babies. Currently we only have two jugs open. I think I can tag and band the single under the stairs and the other single. Both of those babies are healthy and moving around well. It gets a lot harder to find mom when there are 25 other screaming little lambs running around.

Yesterday morning I had three different sets of babies in the barn. I was able to let everyone out but those thee ewes and their babies. One of the ewes was crazy! I know this because after 20 minutes I had still not managed to trap her in a jug. I also noticed she had a notch out of the no ear tag ear. I have a notcher for marking the bad ewes. I almost never use it as I don’t like it, but this ewe is getting another notch and we need to cull her. I ended up trapping her in the chute then opening up the barn side of the chute and chasing her into the jug under the stairs. This worked surprisingly well. It did require moving stuff around but in the long run it would have saved me time. I had a set of twins and a single in with the two ewes. When I separated the ewes I must have messed up. I went out there this am and the dark black ewe was head butting both of the pure white babies I had in the pen with her. So I swapped babies and will need to go out later and see how the babies are doing. When I swapped them out the mothers went right up and were sniffing the babies. Yesterday the ewes were eating and they let the babies nurse. So I could not tell who belonged to whom.

  • Date of update- Feb 26, 2023
  • # of Lambs born – 41
  • # of ewes who have delivered babies – 25
  • # of ewes still pregnant – 16-18 in area, I don’t think they are all pregnant
  • # of single lamb births – 10
  • # of twin lamb births – 14
  • # of triplet lamb births – 1
  • # tagged male (weathers-neutered) lambs-13
  • # tagged female lambs-13
  • # of bummer lambs – 2
  • # of lambs who died in first two weeks – 2
  • Total # of lambs on farm -37
  • % birthing rate- 164%
  • % production rate -148%
  • % survival rate at birth – 100%
  • % survival rate at 2 weeks (bummers count as death as they need help and leave the farm) – 90%

The ram and his cronies got out of Alcatraz this week. I am pretty sure they got out through the lamb shed. I did not reinstall the gate in front of the barn after it got knocked off last summer. Not only do I need to reinstall the gate but I need to mount a cattle panel onto it so the sheep cannot pass through the bars. I managed to lure them back with grain and used the horseshoe door anchor in addition to the clip.

Evening food rush, grain in buckets

Office finish work closing in on done

This is the part of the project that I don’t really enjoy, I don’t really care for the finish work. I realize that the product needs to get finished to look great but I still think it takes too long. Mr Professional came out on Saturday and Sunday and we worked on the office. Both windows got the router treatment courtesy of a new portable DeWalt router. Mr Professional got the casing and trim installed after a couple more tubes of caulk were applied. We are really attempting to seal the room up so that there are no bugs! The sound is already pretty blunted. It is amazing how quite the room is when you are inside with the doors shut. I spent most of Saturday working on getting the backlit inset frame sealed up and the trim installed so that it would hold the stained glass window we got from a thrift store. I used hinges and parts left over from various projects.

We got the router shelf installed. The fiber optic company came out during the week and installed new cable to the office. I ordered new cables for inside the house that will keep the cable near the wall. We will get the finish trim for that corner installed after the new cable arrives.

I spent Sunday cleaning the office floor as the front door blew open and the muddy puppy went into the room and enjoyed her self immensely. There was quite a bit of mud to get up off of the floor and couch. I do need to get two more door bumper plates to use as a shim.

We have the double barn door hardware installed on the wall. It still needs to be tightened up but it is in place. This did not go as smoothly as I had hoped. We only had to redrill one hole. Our mistake was covered up by one of the pieces.

Annmarie’s new desk was assembled along with her new chair. I spent most of Sunday wiping Tried and True on the molding and then wiping it off. It is just not a fast process. We got the two tables leveled and ready for the laser cutter and 3D plastic extruder printer. The real gem was getting the inset stained glass window completed. I am now really happy that I took the time to build this into the wall, no matter how much extra time it cost me.

The big things left are to finish the insulation install in the attic, to seal up the door going into the next room, installing the laser ventilation fan and to get the barn doors made and installed. I also need to pour epoxy into two cracks in the floor to fill them up. I am hoping I can get it all done in three more days!