#stewartcreeksomethings

Bathroom remodel day 37

Steve Hardin1 Comment

Well, I have put three more days in on the bathroom. It is going, not smoothly but it is progressing. On Friday I was able to get the plumbing parts installed. I only had to go two stores to find what I needed. Unfortunately, I discovered a couple of issues. These are what I will be referring to as endearing quirks in the future. The first issue was I could not get any hot water, only cold to come out of the shower head. I thought I had reversed the valve insert and I could simply turn it 180 degrees and solve the problem. After much consideration it dawned on me that I had plumbed the hot and cold backwards. The instructions were quite explicit on how to install the valve body such that the hot and cold would not be backwards. I read the instructions repeatedly as this is not really repairable unless I tear into the hallway wall and correct if from the back. So as a constant reminder that I did the bathroom the hot and cold water are reversed in the shower. There is also an insert that I did not raise the floor high enough so it collects water.

Currently, we are going to live with it for now and see how it goes. That won’t be hard as we are still not using the shower. The bathroom has no ventilation fan, lights or heater. We need to get the wood sealed and the ceiling up before using the shower. Saturday and Sunday I worked on getting the tongue and groove installed on the upper walls. What I did not realize until I was two boards deep was that for some odd reason I had two sizes of tongue and groove boards. The groove and tongue were smaller on one set. Needless to say this was not discovered until I was unable to marry two pieces with a large hammer being involved. I then had to sort out the two types and discovered that I had enough to complete each sidewall in their own type. This meant I only had pieces that did not match to do the end wall. I ended up with a trip to Home Depot to get ten tongue and groove blue pine boards. I had to look through 50 boards to find ten worth buying that did not have horrible cracks or knocked out knot holes. I would recommend waiting a month before going there to buy any.

I was able to use these to finish the end wall today. It took forever to get the walls installed as each single piece of wood had to be sanded smooth. No one puts a smooth finish on wood any more, it all has to be sanded. This takes quite a while. I had hopes of getting the ceiling installed this weekend also but that did not happen. I am going to see if I cannot work on the ceiling this week. The sheep are lambing so it is taking me two hours after work out in the barn to get everyone fed and put up for the night so there is not a lot of time left for the bathroom.

Annmarie and I found a mirror kicking around in the house when we were setting up her sewing room. It used to go on a men’s butler drawer I believe. I had this great idea to install it on the wall in our walk in closet. She told me it was fine but it was not going to do her any good. I got some metal pieces to hold it in place and installed it this weekend.

Lambing week one

Steve HardinLeave a comment

This weekend marked day seven of the lamb experience. We are doing surprisingly well. That green grass at the end of the year really helped the ewes out. They went into winter with the most weight they have ever had. This is reflected in the sheer quantity of lambs that are being born. It doesn’t help that we did not really cull out any ewes last year so we have almost 50 ewes and close to 200% productivity. We could have 70-80 lambs running around. They are already underfoot everywhere you go. They are incredibly cute and very loud at the same time.

  • Date of update- March 30 2025
  • # of Lambs born – 36
  • # of ewes who have delivered babies – 19
  • # of ewes still pregnant – Approximately 25 in area, I don’t think they are all pregnant
  • # of single lamb births – 4
  • # of twin lamb births – 13
  • # of triplet lamb births – 2
  • # tagged male (weathers-neutered) lambs- 0
  • # tagged female lambs-0
  • # of bummer lambs – 1
  • # of lambs who died in first two weeks – 2
  • Total # of lambs on farm -33
  • % birthing rate- 189%
  • % production rate -174%
  • % survival rate at birth – 100%
  • % survival rate at 2 weeks (bummers count as death as they need help and leave the farm) – 92%

Mr Rainman worked on cracking grain on Saturday while I did the grout patching in the bathroom. I had picked up three metal 55 gallon drums with lids this week and he proceeded to fill two of them with cracked grain. We now have a 55 gallon drums, two metal trash cans full of chicken feed. We were able to take two full 55 gallon drums with cracked grain to the barn so we can feed the nursing ewes some grain twice a day.

The lambs really are not bright. We had one hang himself in the fence on Friday evening. He stuck his head over the woven wire and then reached down to reach back into the same field. This caused his nose to get stuck behind the wire and he hung himself. We had just been out there two hours earlier! The lambs are so small that they keep getting out of the momma/baby area by just crawling through the woven wire. They get stuck outside the fence and start hollering incessantly. So today we lined the bottom of the fence with boards so that the little lambs cannot crawl out. This is no guarantee but it should work.

On Saturday, I was talking to Mr Rainman and looked up to see a ewe have a baby. It literally just popped out! The placental sack was still intact and we watched the lamb flop around inside the sack. After a couple of minutes I realized that the lamb was not going to break out of its coffin. I walked out there and had to tear apart three layers of “sack” to get the lamb’s head out of the covering and out of the liquid. I drug it out of the rest of the sack and then chased the ewe over to near it. We then left to see if nature would reverse course. The ewe did come over and start cleaning the lamb off. We now have that ewe and both twins in a jug inside the barn. I saved a life!

Today we cleaned out the strawberry bed but did not see any asparagus starts poking out. If we did not drown them last year they should be coming in very soon. We also trimmed the blackberries and raspberries. I realize we are late getting them trimmed but they did get done. I also dug up a row of dirt and shoved cut off raspberries in it. I am trying to propagate another row of raspberries.

Mr Rainman will come out this week and do annual repairs on the sprayer and start spraying fields 1 & 2.

Bathroom day 36

Steve Hardin1 Comment

Spring is coming! I need to be done with the bathroom! There are a lot of things to do outside now that spring is here. Instead on Friday a little mastic was mixed up and the three tiles were set. We then went out to the old chicken coop and brought in all of the blue pine tongue and groove siding. We measured it and I did the math, we should have an extra 6 sq feet. The air compressor and nailers were drug out and we determined that we don’t have any 16 gage finish nails short enough. Some will have to be purchased. The 18 g nailer will only take 1.25” nails and I want at least 1.5”. Those are now purchased and ready to go.

Since we now had to wait for the bathroom to dry out for a day before patching the grout we went outside and started to drag the gravel road in an attempt to work out the potholes. We spent a couple of hours dragging the driveway with the box blade and the arena groomer. It turned out pretty good and there are currently no pot holes in the driveway.

We have been having so many lambs that Mr Rainman and I ended up rearranging the barn. We made the momma/baby area bigger.

Saturday a batch of epoxy grout was mixed up. All I had to do was patch the bad areas and then clean every hour. I did this and two hours later found three little pin holes. A fresh batch of grout had to be mixed up so I could swipe a single time in a single spot. It was some serious overkill but totally necessary. We have one batch of grout left if needed.

I unpacked the inset vanity that goes over the toilet. I thought I was going to have to set it first before putting up the tongue and groove wall board. It was going to require a lot of specialize cuts. I traced out the cupboard pattern onto the plywood so I could start getting a feel for how I was going to cut this board. Annmarie came in, looked at it and said that I could just set the insert over the wall boards! This will make it so much easier. I plan on getting the wallboards installed next weekend. Mr Rainman will be gone and it is something I can do without any help.

Annmarie and I are so confident of the shower that we ordered the shower curtain rod and soap holders. I will be finishing the plumbing install next weekend also. I was informed that the rest of the bathroom can be a work in progress as long as the shower works.

Bathroom day 34

Steve Hardin1 Comment

Well, we managed to get three more days onto the bathroom project. I spent most of Friday cleaning the tile so we were ready to put the grout down. I had to scrape and vacuum the tile clean. I was a lot messy when I started installing the tile. I became much neater as I continued the install. It took me all day to scrape everything clean and vacuum it all up.

On Saturday, Mr Rainman came out and touched up a couple of spots then we decided we were ready to go. He mixed up the first batch of epoxy grout and I tried to get it into the cracks. I had this big plan on using grout bags and squeezing it into the cracks. That took forever and I wasted about 15 minutes before giving up. As each batch of grout only has a 80 minute work time I just could not mess around with the bag method. We ended up getting three batches onto the walls Saturday. For the third batch I had to wear leather gloves then put my thick disposable nitrile gloves over them. I had already managed to get a large blister on both palms and I was hoping the leather would help. It did help but I had already torn open the blister. I spent 80 minutes brushing on grout and Mr Rainman spent about an hour cleaning it all up. We just kept alternating roles until we had three batches installed. I did the last wash on Saturday so he could go home. We managed to cover a lot of the bathroom so we were certain that we could finish on Sunday.

It was a good thing we only had to mix two batches on Sunday as my blisters could not handle a third batch. The leather gloves helped for batch four but I had to use some moleskin on my hand and the leather gloves for batch five. I was right in front of the door when I pulled up three tiles. The mastic was drying up when I installed the tiles near the door and it was obvious that it did not stick down all the tiles. We will have to dig out the mastic and reapply those three tiles. This is going to slow down the cure time on the grout as we won’t be able to repair the floor until Wednesday and then when we regrout we will need to wait another seven days. A minor setback, but one that can be corrected. We can work on the door and getting all of the wall supplies down to the old house. I need the walls installed before I can install the ceiling. The crown molding cannot go up until the walls are completed.

Lambing has begun!

Steve HardinLeave a comment

We knew the sheep were due to have lambs very soon so we started to lock them up at night four days ago. This morning we had our first set of twins! The Gingerman and daughter went out to check on the sheep and discovered the pair. They went into a jug and were fed and watered. Sarah asked me about feed for the momma. We usually supplement their hay with some grain or sheep feed to increase the number of calories the nursing mommas are getting. I didn’t have any out in the barn. So I added it to my list of items to get accomplished today. The Gingerman had brought down another six bags of garbanzo beans so I decided to grind up a few bags to feed to the mothers. I brought the tractor around with a few old protein lick tubs and proceeded to mix feed as it went into the grinder.

I only had one stoppage while grinding this time. I think one of the wires is loose in the on/off switch but I managed to get it going again without tearing it apart. I ground about 200# of feed for the sheep. I have two full metal trash cans of feed already ground for the chickens and at this point I need to get some more metal 55 gallon drums to store feed in the chicken coop. I will need to start moving the cracked seed out into the barn into the large metal feed container. It will hold over 1000#. At this point I am still pretty focused on the bathroom so I will only be cracking grain when I need it for the sheep. I am hopeful this cracked batch will get us to the weekend. The grain containers don’t have covers but I am hoping the raccoon will leave it alone. We will see.

I went into the barn and set up the momma/baby area. Put out feed, opened up the side fence so they can get to water. I put a brand new protein lick tubs outside and pulled a panel over the gate so that no one can get out. We are now ready for the mommas/babies when they are bumped out of the jugs and into their own area.

The sheep snuck by the tractor when I was grinding grain so I had to battle them most of the time. I finally ended up opening up the gates so they could go up onto the back hillside. The grass is a couple of inches tall so they can get some fresh green grass into their diet. We are still filling all of the feeders in the barn also. We won’t stop that for a while. I am hopeful lambing season will go quickly. There were three rams in the pasture for breeding so we are hopeful they all tried to outcompete each other!