I am unsure what I did this last Friday. I know I was outside quite a bit, I did clean off the front porch like the wife wanted. I picked up trash around the farm and ended up working on the front gate latch. A board had to be added to the gate to get the latch in the right spot. It is still not quite in the right spot but it is working better than the piece of rope. So we are going to see how it does. It does look better than the piece of striped rope! We also cleaned out the old house, two more huge bags of trash out to the trash can full of construction debris. I managed to even do some cleanup around the machine shed. I remembered, we had to change a tire on the flat trailer and go pickup more wood for the office. We got the boards to build two slider doors and the wood for all of the trim work around the inside of the office. We had to unload it back into the old house as it was supposed to snow the next day. I did change the supplemental feed for the ewes from a molasses mix to alfalfa pellets. The pellets have a couple of percentage points more protein. The trouble with this is the sheep LOVE their molasses crack. They are not very impressed with the alfalfa. So I have had to mix in some crack in with the alfalfa pellets to get them interested in them. It is working. I had to take a dead ewe out to the bone yard.

Saturday was better organized as I wanted to really get the office floor done. I did not expect to finish it but if it is going to get done I need to make progress on it every day. I have PTO coming up next week and want to get the floor done. I would even like to get the walls done but with dry times for the floor I don’t see that really happening. Unless I can get the floor sanded and cleaned up in the first three to four days I have to wait 24 hours between coats of stain and polyurethane. I really need three coats of polyurethane so that eats up all the time needed to rub walls down with the wax/oil sealant I have purchased for them. It will take me a couple of days to get the walls rubbed down and then after the walls are done I can cut trim, rub it down and then install it. Once all of that is done I can get the office set up then I can work on making the two sliding doors. They will be the very last thing I do.

It did not take long to use up all the sand paper I had on hand. So I went to town to buy more and Mr Professional cut insulation for the attic. He had brought out a 21” sander and I had a 18” sander so I decided to buy sandpaper for both sizes. I went to two different stores and bought all of the course paper they had in both sizes and ended up picking up some kind of paint wheel that attaches to a drill. I was sure we would run out of paper and would not be able to remove any paint. The little device did work but the 21” sandpaper on a higher horse power rotary belt sander did a much better job of tearing up the old paint. We made great progress and I think we can get the last of the paint off in one day.

Sunday was not going to be another office day. I went out to open the barn doors and discovered that there was a screamer lamb in the midst of all the ewes. This always makes it hard to figure out who is going to claim said loud mouth. I got the ewes to leave the barn fairly slow and then there was only a lamb standing there hollering and a ewe at the far end of the barn. I walked down there and sure enough she had a twin all curled up sleeping in the straw quietly. So this meant putting up panels at the far end of the barn to create five creches. We then hung feeders, filled up buckets with water and alfalfa pellets. Now the barn is ready for Monday morning when Annmarie comes out to let the sheep out of the barn.

We needed to sort off nine sheep to get five loaded up for transport to the butcher on Sunday evening. The other four will go on Friday. Of course the animal trailer has a flat tire also. I cannot seem to find my cheap little 12V tire pump. So that meant getting the back of the pickup cleaned out so we can slip in the animal pen. Of course we used the tractor, it was easier but the animal pen needs some welding repairs and we had to keep it together with strategically placed straps. We did get it in and strapped down after cleaning out the pickup and tossing the stuff in trash, a little in machine shop and the rest on the burn pile. The next problem is to get the sheep to run up into the back of the pickup so we do not have to lift them up into the pickup like last time. There is a very old ramp on wheels that is bent and beaten up. We tried to straighten it out but got stopped by a very thick piece of angle iron. It was going to take way more time to straighten it out and fix it then I was was willing to invest. So after looking at the corral I decided that we could make a ramp! So three 2×4 and a bunch of scrap wood and screws later we had a 8.5’ ramp. We used a iron T-post to rest the ramp on and had to use a couple of pallets to keep the sheep from squirting out the sides. Next time we are just going to remove the tailgate from the pickup and we will be able to just back right up to the ramp. The only thing I need to do is to add a few more boards up the sides to block the view over the sides from the sheep. They could have just jumped off the ramp right over the sides of the corral while loading up if they had so desired.

I used the puppy on a 30’ lead line to herd the sheep. This was fairly productive, but there is no way the puppy can be let off lead and in with the sheep. Once we had the sheep in the corral I left the puppy in the yard. She kept sticking her head into the corral and trying to crawl into it with the sheep. I finally had to lock her in the back yard. She ran back and forth along the fence caterwauling because I would not let her at the sheep. She seemed quite determined, this is a good quality in a sheep dog!

I have been scraping the honeycomb and honey into a sieve trying to get the honey out. I did not want to set up the frame extractor for one frame only. This way is slow but I am getting honey!