Finally, something has gone my way this month. It has been a long month and a lot has happened, most of it not great. My new hard hat came and after three of us tried to adjust the straps to lower it on my head, Meathead figured it out. I wore it when I was wiring the trailer! I will definitely need to wear a cloth rag on my head when I wear the hard hat. I was sweating. I complained to Annmarie about the heat and she pointed out that it was 84 F. This would explain why I though it was so hot, that is the highest we have been this year. I managed to get the entire horse trailer wired, added a small internal light and taped up all the future wear spots to protect them. I was worried that I would spend all that time and something would not work, that problem is very hard to fix if you think you did it right the first time. Everything worked perfectly, I was truly amazed. I did not even blow the fuse in the pickup. I had three spares just in case I needed to do some trouble shooting.
Now I need to get the tire off and replaced. I will take the tire off today and get it replaced tomorrow. I will also probably pickup a second spare tire. I will also get the spare tire for the flat bed trailer fixed. Might as well get it all taken care of at the same time. Unfortunately, the pickup tires need replacing soon also. I have to take five cows over to Lagrande this week to get slaughtered.
Mr Rainman worked on spraying around the house and the garden area had a nice kill rate. In a few days we will be able to clean up the dead grass and weeds. Field #1 & 2 are sprayed with 2-4-d and Milestone. I am hopeful I can get out and spray #3 this afternoon. He also got the lavender spot sprayed and started spot spraying the orchard. As soon as we get the spraying done we are going to spread some fertilizer. This will be the first year I have ever tried to fertilize. I am hopeful it makes a difference. The real test will be to see if the value added is worth the cost.
Annmarie has been working on the garden watering system. She added all of the wine barrels onto a new line and they will be growing our herbs. We kept some dried herbs to use throughout the winter and found that they were way better than the store bought ones. So we are going to put up more herbs this year.
We are going to get more bee hives. Mr Rainman made three concrete block spots out in the orchard for the hives to live on. I am going to add two posts and then we will hold them in place with a 2x8x16’ board across the top. I will use eye hooks and clips on the post and ends of the board to keep the hives from getting blown over in the wind like last year. The bee hives don’t do well in 80 mph winds. We are hoping to have the same success this year that we did last year.
Our back runoff creek has stayed amazingly quite this year. It is running clear and only about eight inches deep. No four foot mud wave roaring behind the house. This bodes well for not getting the upper fields flooded out this year. I need to do a little more ditch digging and cut down 1-2 trees and we will be ready for another flood level stream height.
The sheep may be done now. We have had a set of twins and a set of triplets in the last week. I need to catch them and tag and band them still. I will get the final stats done in a couple of weeks. I need to make sure there are not any more stragglers.
Well things did not go as planned after my concussion last week. I ended up getting a head CT and going to the concussion clinic. They put me on some turmeric and fish oil supplements and I am to rest and relax. I am allowed to do what I can but not to over do anything that makes my head symptoms worse. Plus, I am off work for a week. This is not going to help my head next week when I have to catch up but right now I have a nonstop headache. On top of all of that I have to listen to a lot of awkward jokes about leading with my head, how did you do that and you need a hard hat all of the time. I did capitulate after a few days on the hard hat idea. I really don’t like this laying around and since I wear a hat all the time when I am outside anyways it didn’t seem like a stretch to just wear a hard hat all the time when I am outside on the farm. So I have a OSHA approved vented carbon fiber hard hat on its way to the farm. I will be getting rid of all of my hats in the laundry room so that there will only be one choice when I head outside, the hard hat! I normally hit my head several times a year hard enough to give me wounds on top of my head so I am looking forward to not having those anymore either. Plus, I don’t get headaches and I particularly don’t have the patience or tolerance for them. Muscle aches, yeah I am used to that but not the headaches.
Mr Rainman is back in the area and has agreed to help me out this summer. I won’t be doing half the amount of hay I did last year and my only big project is the back bridge. We are going on a vacation to Scotland soon so that has limited the projects that will occur this summer. We have the grain bin outdoor cafeteria building still to put put but I am having reservations about putting it in the front yard as it will block the view of the barn. It’s not a priority but my brain is spinning on how to do it so I made Annmarie talk me through it’s location again. We decided on the front corner of the hillside by the corral. The grass never grows there anyways. It only needs to be leveled by about 18” so it should not be too bad of an area to prep. The only concession I will need to make is a set of gates on it to prevent the cows and sheep from going into it when we are running them through the yard.
Mr Rainman and I walked the entire property to see how things were going. We spotted our first calf of the year! It is one of the new black ones we just purchased a few months ago. Every one else should start having their babies soon as we planned for May births. So next week we will be sorting cows as I need to take five to Lagrande to the butcher. We are going to create two new herds, new mommas and expectant mommas and everyone else. I will move the new bull into Alcatraz as soon as I take our old bull to the sale. He needs to not go into the herd until the end of July. So we can then have calves nine months later in the spring.
The upper seven acre field was covered with late grass last year and I never mowed it or did the second hay cutting. It looks like only about half the field came back. This just means that I hay what is there and in the fall we plant the rest of the field in true orchard grass. It maintains it’s protein status better than most grasses throughout its later life cycle so I don’t have to be as picky as to when it is converted into hay. The other upper fields looked good but the cows are eating on all of them but upper seven acres (it needs new fencing around it to make it animal safe). We outlined a plan for spraying all of the fields and he started cleaning up the corral, old rotten hay bales to the burn pile. The Kubota got cleaned and greased. A few hours later Annmarie texts me our bull is in with the neighbors cows. It is not our old bull as he is now in Alcatraz for this exact reason. So we went down and spent 45 minutes chasing the two bulls back into our pasture. They had to fight for 20 minutes at the neighbors before we could get them to go back through the culvert. Once back through we had to fix the crossing again. We ended up patching a couple of fence spots, reinstalling the gate down by the schoolhouse and driving back to the house via the upper hillside. The irrigation ditch was flowing outside its channel making a mess through the lower field. I thought we could dig the blocked spot and get it back into the channel. We ended up digging about a 75’ section with the tractor to get it contained. The upper hillside section I planted in the fall is not growing the grass I wanted. It is a lot smoother, it is not growing sage and the grass that normally grows on the hillside is coming in nicely. I then laid around for four days doing nothing and sleeping a lot.
This week the weather has improved dramatically so the priorities have had to change a little. I wanted to get projects done that set up Mr Professional so he can come out and work alone when I am back to work. So lots of organizing, sorting and cleaning up has been happening. On Wednesday morning we sorted the sheep and pulled off the rest of the lambs. Not sure why I didn’t think of that the first time, but problem solved. We moved all the lambs but three over into the orchard pasture to hang out. I thought we only had three in with the ewes, we spotted a fourth one that evening when we were feeding, a little boy snuck past, he must have been hidden in a mass of ewes. The grass in that pasture is over eight inches tall and needs something to start eating it down so I don’t have to mow it. We want the babies close as they have a tendency to disappear due to predators. We let Zeke, our old border collie push the lambs through the yard into the orchard, he was very happy. All he did was walk up to them and lay down. He has been laying around a lot lately and has started not eating all of his meals. We are going to switch him to soft food to attempt to encourage him to eat. He is probably not going to make it through this year.
We went out to the machine shed and sorted through the piles of scrap wood we got a couple of years ago. It was leftovers we got for a steal and had it delivered right to the house which made it even a better deal. We are now starting to dig through and use the material for various projects around the house. But it was taking up space in the machine shed and we are going to make the old chicken coop the storage area. So we sorted out the junk. Sorted out the stuff we would use once for concrete forms, which are now stored outside the chicken coop and tarped, under the eaves, so we can have easy access to it when needed. We even kept the subflooring sheets and oak plywood sheets separately in the chicken coop so we can use them for the old house. The old bathroom is going to be Annmarie’s office storage room and it will get oak plywood flooring. The floors are slanted and will need to be leveled. The old kitchen, soon to be freezer room, will need to get leveled also but it will just be 3/4” subflooring and 1/2” plywood sheeting on it. We will just be sanding down the original floor like we did in our upstairs rooms in the house.
I took the time to brush the horse. She is shedding something fierce and without another horse buddy to help her groom she needs some assistance. I have brushed her twice this vacation and Sarah brushed out the dogs when she was home so everyone looks pretty good. We came into the house and took out the old TV stand. It is very heavy but Annmarie reminded us we have the shoulder furniture movers so we found those and it made moving the stand an easy thing. I moved the new chest into its spot after cleaning the floor and doing some cord management stuff to organize the electrical mess. Annmarie wants us to use a piece of plastic channel to contain all of the TV cords to make it neater. When that comes we will install it, it does look a lot nicer with the cords contained.
Mr Professional got the side by side up and running in under five minutes. This is without the battery being plugged in. Adding that large deep cycle battery under the driver’s seat was just what we needed to keep the thing going. A dead battery all the time is highly annoying.
The small stuff I ordered for the tractor came this week. The speed handle is installed! This should just come standard on every tractor, I am unsure why they don’t. There are a couple of tool racks that will hold a chain between them now mounted behind the seat on the roll bar. The chain is actually in one spot now not tied down to some random piece of the tractor. The quick hitch is now installed and I have filled the ballast box with horseshoes. So now the Kubota has pallet forks on the front and a ballast box on the back with several hundred pounds of steel in it. It feels a lot better when you are carrying something heavy on the front.
We let the new alpaca out of the orchard thinking that everyone seemed to be getting along. The old adage that fences make great neighbors is still true. By that afternoon Mad Max had the young brown one pinned to the ground and was screaming in his ear. I tried to holler at them to get them to stop but no go. I went over and encouraged him to get off of the baby and strained my right knee. He did not initially take the hint. The alpaca can be very stubborn or determined, depending on how you look at it. We watched them for a while and all seemed to be copacetic. The next morning when I went outside there was more fighting. I went out and chased away the offenders but I could only find the two new young white alpaca and only counted ten. Which meant that the young brown one was missing, but Mad Max was present but one of our other old brown alpaca was missing. I had to walk all the way down to the end of the driveway and found the poor little alpaca pinned to the ground and the older one on top grinding into him. I had to chase him off with my coffee cup as a tool, my knee still hurts so no kicking. When I got back to the now 12 alpaca I wanted to put the three babies back into the orchard with the lambs. But they kept walking away from me. So instead when I opened the gate the seven older ones bum rushed the open gate and went into the orchard. So now the new animals are outside the fence and the old grumpy men are stuck in the orchard. Mad Max is now with the young ones but he has not been any trouble since the split. So now Annmarie asked me if I verified the gender on all three new alpaca. I did not do that. So now we need to verify that we did not end up with a female as we really do not want any cria.
On Thursday we got the side by side ready to spray. I put the first 30 gallons of round up through just spraying our road and driveway down. The only bad part about roundup is it takes at least a week before you can tell something was sprayed and two weeks for it to totally die. We cleaned out the tank and Mr Professional sprayed field #5 & 5A with 2-4-D & Milestone to kill the broadleafs, the thistles are already starting to spread. Unfortunately, the flood from two years ago changed the direction of the creek and one of the tall banks is seriously undercut. We have probably already lost eight feet of hillside and may lose another eight feet. If we lose that total 16’ I will have to move the fence. There is a very large curve in the creek now. We finished cleaning up and tossing everything onto the burn pile. I will need to get that burned again in the next month.
The big push now will be to get the spray onto all of the hay fields. We need to do this as soon as possible and then once that is done we can start fixing the fence down by four corners. As soon as that fence is done then it will be repairs on the hay baler and getting all the tractors tuned up and oil changed so everything is ready for haying season. We will be getting the barns cleaned out also so we have a place to put the new good hay.
Thursday was a perfect day to catch up on our field spraying. The side by side is all ready and as long as I put a quart of oil in every time I add five gallons of fuel it works great. Yes it is burning a lot of oil. I am hopeful there is a treatment I can add to the oil that will extend its working life. Now that we have the big marine battery installed under the driver’s seat it starts right up! It is pretty amazing to just turn the key and have it start.
We are mixing 10 cups of 24D, 3 cups of sticker and 7 ounces of Milestone to 50 gallons of water. This is killing the broadleaf and the thistles are dying. I noticed after looking at the fields we sprayed a month ago that it was time to spray again. New broadleaf weeds were 3-7 inches tall and ready to be murdered. I was able to spray all of field #1, 2 and 1/3 of #3. This was incredible progress, the wind finally started to pick up so I had to call it quits. During this time I realized that our home weather station is broken again. I kept trying to check the wind speed (no spraying over 15mph, I like to stop at 10mph). The trees were moving the wind was blowing and our weather station little round cups were not moving at all. Turns out they have decided to stop going around and around in the wind. So we researched another brand and purchased a new one, this one using sound to measure wind speed, it has no moving parts! Our hope is this will last and not cause us problems. Luckily, the pole I installed on the last replacement can be used for the new one so this will save a lot of time.
I was able to spray all of the fence lines along the fields also with the hand wand. This has caused me to realize that I need to install a hose on a reel for the spraying that is self retracting. This way when I get off the side by side to spray I can move around more than 12 feet. I am going to have to look at what Harbor Freight. I am sure a frame will have to be welded to our current setup to get it to fit and be stable.
I was able to spray all of #4 and another 1/3 of #3 on Friday before the wind made it impossible to continue. The fields look better and I need to cut at least one field as it is all cheatgrass. The sheep don’t like to eat it but after last year we have learned that if I bale it we can use it as bedding for the entire barn. The sheep will spread it around and then pee all over it. If I have enough of it I don’t have to buy any straw to use for the bedding. The best part is the compost pile gets hot enough the next year to kill all weed seeds. Unfortunately, the tractor is in the shop for repairs. The front wheel bearing seal requires too much work and a hydraulic press which I don’t own. When I took it into the shop I found another leak from it sitting on the flatbed trailer. I had them quote me for fixing the wheel bearing seal, for fixing rear hydraulic takeoff connector, the hydraulic leak and the bucket controls are sticking so they are going to fix that also, for the low low price of $1200. Annmarie heard the quote on the answering machine and wants to talk about a new tractor! I do need a new tractor but we are waiting two more years until Meathead is out of school. So for now we will repair the tractor and continue on.
I net wrap I ordered came and a spare hydraulic hose for the sickle bar mower. I really needed the actuator arm for the baler. It is bent and the constant pulling on it is making it worse. I will need to call them on Monday to see where my last two rolls and the actuator are.
Annmarie talked me into putting all the cows that are due to have calves in one field and locking them in so we actually know when they have babies. This is a new concept for me as I usually have them running all over the farm and we finally get to see a calf when it is 2-4 weeks old and its mother actually lets it wander around with her. Our first calf has been born and more should follow soon. Once the last one is born we can just run them all into the corral and band and tag them all at once. Doing it all at one time will be a nice change.
The sheep bridge I built was not in vain. Even though the sheep initially did not want to use it, they all pretty much line up to use it now. The ram still refuses to go across it, he jumps the back creek every time. Some of them feel that waiting in line is beneath them so they jump. The bridge is 10 feet across and barely spans the creek. I really need to build a 16 foot bridge. The flood really tore up the creek bed and widened the creek by about 50-100% in some areas.
Mr Professional and I spent a day laying block and gravel after I dug down to create a pad area for my mother-in-law’s new shed. The shed is coming prebuilt on a truck, the shed is 10×20 feet long and they should be able to just set in place now. Once the shed is in, we will work on building the ramp.
I am having trouble with a weed called a common mullein. I had to pull in a weed expert and figure out how to kill it. It looks like spot spraying with a lot of sticker and some roundup will kill it in its tracks. It is starting to spread and I had noticed that it was not dying with the 2-4-D & Milestone combination. I am loving the spray set up on the side by side but the side by side needs a ring job and it is burning oil. For every two tanks of gas I have to fill the oil. Sometimes I think I can kill the weeds merely by slowing down and letting them get a taste of the exhaust. I upgraded the spray motor last year dramatically and now get a nice continuous spray. I think we are going to add one more nozzle on each end of the boom.
I am going to have to break out the welder soon. I need to modify the stock rack for the pickup, the flat bed trailer locking tongue is cracking so a new one needs welded on and I need to extend the spray racks. Those are the current big things that need to be welded. There are lots of other little things but those things need to happen soon to keep everything running. We have to go pickup our new ram early this summer.
Stewart Creek Somethings 