trumpet vine

Cleanup day

Steve HardinLeave a comment

Sunday we focused on getting the Rambler set up to grind grain. I walked him through it for about 20 minutes then cut him loose. We had two 55 gallon drums set by the grinder and we set it up next to the chicken coop so he could just carry the buckets into the back of the coop and dump them into drums. There is no way to move the full drums into the back of the coop so this has to be done a bucket at a time. He did pretty good but as soon as he was close to getting finished we brought over two more drums full of grain. He thought he was done and Mr Rainman and I told him there was more after this and he just needed to keep going. We ended up loading four more 55 gallon drums into the back of the chicken coop and we still need to fill 2.5 drums. I am sure once they are all full we will be able to go eight months.

I have an old grain bin that can be mounted outside the coop and a feed hole can be cut into the side of the building. It should hold about 800# and can be loaded from the outside. It needs a new bottom welded on it. I am thinking a piece of 3/32” sheet metal. I am sure the grain gate will need to be altered so it can be manipulated from inside the building. I may even move the gate to the bottom of a long chute so it can be placed inside the coop. I won’t really know until we have the bin moved over to the machine shed and we can take some measurements.

Once the Rambler was set we went to clean up the old house. Annmarie wants the porch cleared so we neatened it and removed the scrap wood. The inside still had tools and materials scattered about from the bathroom project. So we created a huge trash pile and started to put tools away. Tools went into the old house, the old chicken coop, the machine shed and the fencing shed. The Gingerman brought out some more concrete chunks and we dumped them next to the culvert in an attempt to harden the one edge from the flooding water. Hopefully, we will not see any more flooding! But since the weatherman has a hard time predicting the weather, who really knows if it will flood.

There is a little frog living in the root cellar! It is bouncing between the top three stairs. If it likes spiders then there is a lot of food down there. I had to clean out all of the cobwebs before I could go down the stairs. The entire stair area was full of cobwebs. It had been a while since I had been down there. I store all of the construction materials that are unique and we may need to repair in the future. I put some bathroom tiles and metal trim down in the root cellar.

The sheep have been hollering like they are dying. No one likes to get weaned. We had a hard time driving the tractor through the barn lot as the sheep on both sides kept trying to bum rush the gate every time it was opened. The babies had managed to crawl under the creek crossing so we went out and lowered the panels so they cannot get out.

After that we went out and cleaned up amount 75% of the machine shed. We had filled the trash can up already so there is a large pile in the machine shed. I will keep throwing some in every week until I make it vanish. There were parts bins and tools all over from when I was repairing all of the haying equipment. I also replaced the outlet on the wall. I had been too aggressive with a screwdriver the day before trying to reset the GFI trip, it does work again.

We then trimmed the trumpet vine away from the roof and the house siding. I am trying to get a runner onto the new section of trellis around our living room window. It is looking promising. I would like to get a few branches trained then I can kill all the other suckers coming out of the ground. We tossed all the cuttings over the fence for the sheep. They love to eat most plans and trumpet vine is no exception.

I spent the last half an hour with the Rambler. He had stopped grinding to think about a more efficient way to grind grain. So we were so efficient with my system that he could hardly keep up with the grinder unloading and loading and moving the ground material into the chicken coop. He was covered in flour and looked like a ghost. He had it out with the sheep early on as they kept sneaking up on him to stick their nose in and get some grain. Before he knew it he had 20 sheep pushing in and trying to get a mouthful of grain. By the time I came over in the afternoon there were no sheep around. They decided it was easier to find a meal elsewhere. We did end up dumping out one bag of grain that had too many rocks in it. The sheep do not care and will eat it in any fashion offered. I may take the sheep in to the auction. We know someone who took little ones in and got $120-140/each. I would gladly take that price. I need to look at my work calendar to decide when it will be feasible to take a Tuesday off to drive them over to the auction.

I did find out that the dead raccoon was on the fence and had not been moved out to the bone pile. So I had to use a shovel to scoop it up and toss it in the tractor bucket for its eternal resting trip.

Our plan in two weeks is to work the cows to tag and band the calves. There are still only three calves from our six cows. One of the cows was fairly young so it is not surprising she does not have a calf. We did have one of the cows slough a baby, it looked malformed and incomplete, so there is really only one slacker.

Catch up

Steve HardinLeave a comment

There was some rain last week and the grass is taking advantage of it. If you stare at the picture long enough you will see some green covering starting to happen on field #3. The cows had been going up through the freshly planted fields as they were dry and there was more grass up above for them to eat. When I noticed this new growth this week I locked the cows into field #4 and the barn lot only. I started to feed the cows hay now. I need this grass to get well established so that next year we can get as much hay as possible and have as much grazing land.

It has been a long week. I had some help early on in the week, Mr Rainman came out to do a few things while I did the paying job. He worked on finishing the harrow work in field #4 then planted dryland grass seed. I want to plant sections of fields where the animals are but need to keep them off of the area while we get the grass established. We want to get the grass growing and the fences in place so we can install an irrigation system. We have been looking at various solutions and need something that is doable when we are 70 years old. We have found an underground system that uses a mainline then has a soft pipe connection to the mainline and a plug in ground level connector. You just plug in the sprinkler head and it works, the best part is the connectors are off to the side and made of flexible pipe so they account for vehicles and animals stepping on them without breaking any pipe. This is the same reason to subdivide the fields. As we run into very dry summers we need to be able to keep the animals off of certain areas to enforce a rotation so that the grass has a chance to snap back. We are looking at selling all of our aluminum pipe to fund the majority of our system. This is in our two year plan, but next year our big expense is gutters for the front of the house and ice breakers for the roof. Again, looking at that retirement need!

I had him cut back our trumpet vine next to the house as the wind had been blowing and it was scratching on the metal roof. He did this the day of a 40mph+ wind storm, it was so bad Annmarie had me send him home.

I also had him trim the trumpet vine growing next to the old house as this had not been done for about seven years and the house was getting rubbed on. We had a huge windstorm today and there was absolutely no sound from anything rubbing on either house. Big win and may cause us to not even have to trim anything next year.

He also picked up all of the branches from our front yard one morning after a wind storm. There were branches everywhere. We usually ignore the leaves and if they get deep enough in the yard then I just let the sheep into the front yard and they eat the leaves. He then went out and pulled a disc around the back half of field #5 (#5b, as I am not going to keep renumbering fields when they get split). That section has a 3-4 foot drop off between levels and needs to be knocked down some to make it safe to drive on. It is not safe to drive the tractor on the drop off unless you are going up or down, no sideways driving will happen unless you want to roll the tractor onto its side.

Friday we were fortunate to have 0.82” of rain fall throughout most of the day, this doesn’t sound like much but its 6.8% of our annual rainfall of 12”. I looked it up we get between 12”-13.5” annually, depends on where you look. This was much needed rain, and if the temperature will stay above freezing and get above 50 F during the day I may get some growth on my fields.

Saturday I spent the morning being lazy, this is not a common occurrence at our house but it does occasionally happen. I then went out and used the arena groomer on field #5b. I spent about four hours going around in circles and trying to knock down the 3-4’ drop off, so when we were driving out here with the tractor we did not have to worry about tipping the tractor over no matter how we drove. It is now safe to drive sideways the length of the drop off. It took a lot of going around in circles to smooth out the field and drop off. I am always amazed at how not flat a field can be that looks pretty smooth from a distance but when you get into it you notice the little irregularities. This should make it pretty easy to cut and bale in the late spring. I keep forgetting how much rougher the little John Deere tractor is to ride around in. I felt pretty beat up after my four hours and definitely wore my seat belt the entire time. Ｉthen took the arena groomer off and put the post hole auger on the tractor. My top three point adjusting bar is broken on the little tractor. I need a new one, it is not turning any more. Once I got the three point auger on I realized I could not hook up the pto shaft as it was rusted on the auger! I drove to the machine shed, parked under cover and used 1/4 bottle of spray lubricant onto the shaft and then let it soak in repeatedly. Once I get the thing freed, if needed I will chain it to the other tractor and pull it apart, then I will clean up the inside shaft, use some lithium grease and put it all back together. I was really just trying to get the auger on the tractor so I can weld on a T shaped 8” holder onto the auger so I can stick 50-150# worth of tractor weight onto the arm near the auger. Sometimes, you just need a little weight on the end to make it work better as I cannot get any significant downward pressure with my 3 point hitch. The hitch won’t even notice the extra 150#. I figured this would help me in drilling holes and speeding up work. I will have to be careful to not let it cut too fast or I will be changing out the shear bolts all the time, but this will be easy to do.

I did not get to do the welding as we had a huge wind storm on Sunday! I fed the sheep and horse then went to get the Kubota tractor with pallet forks to feed the cows in the upper barn lot. The problem is the wind is 50mph and it started to rain again. The rain felt like hail due to the wind, I had to keep checking it as I was sure little ice balls were pelting me nonstop but no, just liquid water at high velocity. The Kubota has been moving the big bails fairly easily, I did not count on that 0.86” of accumulated rain in the last three days adding a bunch of weight to the bale! I had to drive the tractor in 4wd due to only the front two tires and one rear tire touching the ground the entire time. Needless to say, the bale was just barely above the ground and kept touching the ground so the tractor could stay on three tires with one rear wheel about 1” off the ground. I need to prioritize getting a quick hitch for the Kubota and converting one of the 50 gallon drums into a weight that I can back up to and drive off with when using the pallet forks. I have one full of horseshoes and it weighs around 800#. I know this because that is the max weight on my John Deere bucket and its all it can do to lift it. This is going to become a priority. I did notice that the Kubota tractor has an all steel foot deck with raised holes that cleans the mud off of my boots and lets me wash down the deck easily, I had to keep my hat tilted down to keep the rain from pelting my face and I may also need a new pair of muck boots as mine are pretty beat up but still waterproof so I will most likely hold off until they leak.

It was supposed to be a porch day

Steve HardinLeave a comment

There was some discussion this morning on what exactly should be on the to do list for the day. I wanted to focus solely on the porch. I had big plans for getting the block all the way around the porch and was pretty certain it could be done in a day with the help I had on hand. Alas, a long discussion was had at the breakfast table and my new list consisted of a lot of cleaning up of other projects. The ram pasture has all the burn scrap from porch and still has a pile of fencing from the flood damage, the old house porch has scraps, the yard has pallets and unused pressure treated wood, there is trash in the yard, there are weeds in the garden, and a few other things that did not involve the porch.

When Mr I Need a Belt bad arrived I had him go over and work on weeds in the berry patch. On my way over to the berry patch I noticed that the yard had a three foot no mow area next to the fence along with a sprinkler in the front yard that had just been mowed around. I had instructed him to move all of the hoses first yesterday before mowing. So after weeding for a couple of hours, he got the mower out, moved both hoses and proceeded to finish mowing the lawn. He also put the mower back away in the shed. I was late picking up Mr Professional so we just went right to picking up the yard, we pulled the flat bed 16’ trailer around and proceeded to fill it with burnable trash and a few pieces of wood we wanted to save. We still had a small pile of pressure treated wood and the 16’ pressure treated 2×6 for the trumpet vine. So instead of leaving the board in the yard we tore down the broken board. While we were on a ladder doing this we found two more broken boards that needed torn out and one replaced. We had Mr I Need a Belt Bad go get the lawn mower again. Since we had moved all of the boards out of the yard and I had picked up the trash it was time to mow this section of lawn. So I mowed, and he dumped the grass and put the lawn mower away.

As Mr Professional and I were installing the second board I had to crawl up onto the top of the four foot ladder and had inserted myself between some broken boards In an attempt to get an angle on a screw and take the boards apart. I was using the broken boards to stabilize myself and when it suddenly broke, I started to fall off the ladder backwards. Since I understood the precariousness of my position I wasted no time in flailing about for a handle. Unfortunately, the trumpet vines are loved and adored by many different kinds of flying insects of which one is a yellow jacket. They eat the sweet nectar. The mean little bastard understood that I was defenseless and took the opportunity to strike! He stung me on my right ear, but I did not even pause for my goal of reaching a stabilizing point to interrupt the fall perseverance and focus allowed me to grab a stable part of the structure and stop my fall. I spent the next five minutes pinching my ear lob in an attempt to get the burning to stop. While Mr Professional was installing a support board I used the hand clippers and started to cut out some branches over the roof and to trim out all the dead wood. This made quite the mess on the ground and Mr I Need a Belt Bad was raking it all up and moving it over to the trailer for future disposal on the burn pile. We were just about done when his ride came. We had not started moving any block and he was disappointed. He should not be, the trumpet vine looks amazing and the trellis has been needing a repair for three years it all looks amazing! He was able to calculate his pay accurately and with very little stall time. When he first started he kept messing it up, but when I told him I would under pay him if his math was bad he started to realize that those pesky things they teach you in school really do have some value in the real world. He gets it right every time now. We even use nearest 15 minute rounding rules.

Mr Professional and I started in on the blocks and did the short end. We were getting ready to work on the long end when Annmarie came home. He went out to do more honey do chores as she had brought mineral and feed supplements that needed to be distributed. I finished dumping more gravel out into the yard for the wall. Annmarie did not like the small triangle wedge of air you could see when you looked over the railing. I did not buy any capstone. We discussed this for a while and then Mr Professional and I went to Walmart to try and find some pavers on sale. Someone had purchased all of the pavers and none were left. We then went to Home Depot store in Hermiston. We did find the topper block and figured out what sizes were needed but getting someone to come help us did take quite a bit of perseverance. While Mr Professional watched the employees load our block I went around and looked at plants. I bought two small Monterey Cypress trees to turn into Bonzai trees. I also bought some more planters so I could create a bunch of starts from my spider plants. They are out of control and the Jade plant cuttings were a big hit so I thought I would do it again. I did remember to get eggs and the sheep and cows are in the barn lot. I am hopeful that the little boy we singled off yesterday and trapped in Alcatraz will not holler all night again. It usually doesn’t bother me but I had to shut the bedroom windows and it still took another hours to go to sleep the cows were so noisy.