Winter feeding

Winter is here sorta

Steve HardinLeave a comment

Every year I transplant a bunch of houseplants as gifts for the staff at work. I have taken over the breeze porch as my indoor garden area. I share the space with the dog kennels which actually works well for me as I have covered the roofs of all of the kennels with plywood to make more space to put out plants! I have been cloning my basic plants for a few years so I have decided to branch out and start to grow a more diverse selection. To that end I have started to buy seeds online and have been trying to get them started. I am using a heat mat and now I have a grow light and I am still having trouble. I bought some mini greenhouse and that has netted me two plants. So far I have managed to grow four plants from seed. The tallest plants are three inches and fairly spindly. The smallest one is the size of a pea. This is a problem for me as I have taken it on as a challenge. I am up there every couple of days now nurturing them. I usually just water 1-2 times a week under normal circumstances. The wife got me a new DeWalt shelf system for Christmas, the kind of present where I ordered it and it arrives after Christmas. So I will now have two four foot wide by four feet tall three high shelf system on each side of the door. This is good as my other shelf has 50% of it covered in planting paraphernalia. I may need a four foot wide grow light for the new one but I am going to hold off and see what I can do with my little grow light.

I have almost 15 plants started for the next year. I am trying some plants that require a frequent amount of water to grow. I am putting water absorbing crystals into the soil in an attempt to get the plant to have a continuous source of water and not my normal up and down watering quantity. I also got a better quality soil and have been mixing my own batches for the type of plant I am growing. My goal is to have 35 plants ready to go in a year. I have freed a variety of Jade plant that I have had for years and just recently discovered that it was a Jade plant. So now I will be trying to get it to grow another foot tall in the next couple of years. I don’t actually know what I am doing, I just keep trying different things until something works.

Our daughter and paramour got us the perfect farm gift for Christmas, they got us a cast iron boot scraper! I put it out in the yard near the back gate so we can scrape our boots off before we go into the gravel area of the back garden. So far we have not had a chance to use it as it is now freezing most of the time but its potential usefulness cannot be diminished by its lack of participation. We have great hopes for the future.

The cows are now needing fed about every ten days. The second feeder we brought home from the neighbors is a little small for a full big bale to drop in. Mr Rainman broke open a big bale last time and forked it into the feeder with the tractor. I decided to one up man ship him and opted to try and get the bale into the feeder from the top. The problem is the bale is at the top weight capacity of the Kubota tractor. I got the bale directly next to the feeder head on and then dropped the three point box of horseshoes onto the ground then I started to make the front end lift of the tractor to bounce. Every time the weight bounced upwards I got the bale a few inches higher. I kept doing this until I was level with the top of the feeder and was able to dump it inside the old feeder. I had three of the tractor tires on the ground by the time I dumped the bale. If the bale had weighed another 20# I don’t believe I could have done it for fear of tipping the tractor forward. I made sure to take a picture so that prowess with the little Kubota could be immortalized.

Annmarie had me go out and swap out bee food. We are feeding concentrated sugar syrup to supplement the honey. We would like to harvest a bunch of honey in the spring. It was warm enough for the bees to move around and even fly out of the hive box. They are still pretty dang calm when it is this cold outside.

The table saw is now covered on the old house back porch and is ready to ride out the winter weather. I have covered the grain cracker on the end of the porch with the same tarp. I still need to crack more grain. I have been saying this for the last six weeks but Monday night I used up the very last bit of cracked grain and will need to fill the feeders in a couple of days, my procrastination days are about to end.

I have been looking at various spray on insulation foams for the inside of the old house. I am only going to spray it on two walls in the old house for my craft room. What I really need to do is find an old external door with intact seals and a frame to install inside and on the back door. I don’t want to spend a fortune on doors and I need two to finish this space. But I am not installing door or windows until I lift the room up a couple more inches on the outer wall.

Winterizing almost done

Steve HardinLeave a comment

Well Winter is almost officially here. It did snow this week at our house but it did not stick. The mountains have been covered in snow for a week. I keep trying to get things done around the place but the paying job is in overdrive and I have been working a lot making it hard to find time. So I have been doing one item at a time when I have a spare minute. This does tend to drag things out.

We had one of the alpaca die, an old white one. He went to the eternal resting place of all farm animals, the boneyard. Half of them are ancient and half are under age 7 now. We are not sure how their food intake is with all of the land they have access to being dried up. I have been giving them round bales but they are also very dry and the rejects. The alpaca have been eating them but we are worried about their caloric intake. So I went out and got a big bale of alfalfa for them. We have done this in past years but one 1300 pound bale is more hay than 11 (now) alpaca can eat in an entire winter. This makes the bottom of the bale mold as it sits on the ground, gets rained on and lasts all winter long. So this year I managed to get the bale up onto two pallets so it is off the ground. This should make it last all winter, so we are able to feed 11 alpaca for $182 all winter long. Honestly, they are fairly cheap to keep. If we had to pay to have them sheared/feet/teeth trimmed it would be about $70/each. After this year that is not looking too bad! I managed to get the weight box placed on the Kubota and filled up with horseshoes. This is much better than the 50 gallon barrel we used last year. Using this on the Kubota I was able to lift the bale about two inches off the ground and I did not have to try and steer the bale to where I wanted it with only the two front tires touching the ground! I still cannot move the bale in two wheel drive, I have to use four wheel drive on the tractor to get enough traction when there is any moisture on the ground. I will leave the counterweight bucket on all winter, I am hopeful that when I put the snow blade on this will help me immensely. I simply do not want to battle putting on chains in the snow.

I managed to get the mower and weed eater moved over into the wood shed since the bridge is functional. I had already drained and rolled up all of our hoses (11) and drained the front sprinklers and blew out the drip lines in the lavender. I just need to get the hoses into the wood shed and I can cut down the bridge. There are two logs that act as horizontal supports. I will have to build new concrete bases in the spring but I am hopeful that I can use the logs again as the horizontal supports. I will just cut off the ends that have softened. I may be able to get another 15 years out of them. They were here when we moved here and I was able to reuse them when I repaired the bridge the first time. I may also raise the bridge about 12 inches. This should stop it from getting washed away in the floods. If it gets washed away after that then Annmarie will design an ached truss bridge and I will spend a couple of months building it. It won’t be a fast project.

We want to move the honeybees to this side of the back creek. The bridge did not fair very well after the flooding last year and half of it has collapsed. It will not survive another spring runoff. In an attempt to save it, I want to cut it down but then we will have no access to the back shed for a few months. This is unacceptable as we will not be able to check up on the bees and we have been feeding them already so they do not use up all of their honey this winter. We would like them to start the spring with a bunch in the hive so we can steal a lot this next fall. This means the bees need to be moved, without killing the queen and without taking the hive apart as it is now too cold to move the individual boxes. I was able to strap the hive together with a tie down but the bridge needed to temporarily fixed to allow for the transfer. I managed to jack the bridge up using two bottle jacks and this morning Annmarie and I went out to move the hive. It is very heavy and it was decided that just walking and carrying it was not an option. We strapped it to a hand cart and worked it over into the lavender patch. The only problem it will have now is if a huge branch falls down and crushes it. We don’t see that as highly likely but it is possible. We wanted it in the corner to provide some shelter from the wind and weather.

The weather is all screwy again. I am pretty sure that is going to be our new normal. We had 1.35” of rain in a 24 hour period. We set a new record for rainfall in a single day in November. So far we have gotten 1.59” of rain in November and its only the fifth and it did not rain yesterday. We did have a windstorm last night that peaked up to almost 80 mph winds. This of course caused us to lose power last night as all the power lines are above ground and susceptible to tree limbs or poles falling. They had the power up and going by around 1000. Luckily for us we have a propane stovetop and propane stove. We just lit both of them manually and had heat and coffee. Coffee before breakfast, always. There is a reason we keep an old coffee stovetop percolator. We have figured out we are going to have to keep a few gallons of water on hand. I used to keep plastic jugs but found that they will leak over years so we are going to reuse the gallon glass jugs I used to use to make mead. They will not leak and now that we use the old safe I can get rid of the new safe and we will have room for four gallons of water. We did figure one thing out though, we have an old fashioned land line as those used to work 24/7 without power. When our area lost power the land line went dead also. We will now be cancelling our backup as it no longer works without power. Our cell phone service is spotty but its what we have. I will need to get a solar charger for our electronics. We should probably look into solar panels so we have some type of power if the grid goes down but I am unsure about a battery bank and think the technology might be way better in five years. Our puppy did not like the wind storm, every time she went outside she barked at the wind for about 30 seconds before going outside to potty.

It’s the little stuff

Steve HardinLeave a comment

Annmarie had a discussion with me about her loom. Now mind you I had to move the loom to paint the entire ceiling after doing the small repair in the craft room. What I did not know was that before you move a loom that is warped up you should relax the warp. Otherwise, you can throw off the tension and alignment, not that I did that. Annmarie was able to fix it because not only did I have to move it out to paint, I had moved it back in place afterwards! She is back to working on our woolen woven hallway old ice fridge cover. She has about 24 ” done and it needs to be 54” long, so almost halfway. Basically the takeaway is ”Don’t touch the loom”.

Since the weather was so nice and Annmarie wants me to catch up on all the little things we spent Saturday fixing the new round planter in our back garden. It needed to be filled with gravel, then soil, Mr Professional filled it with a lot of gravel, some sheep manure compost then we topped it with some good planting mix soil. We topped off all the other bins with extra soil also. It does seem odd to be doing garden stuff in mid February.

The old ram bolted through the gate when we were hauling gravel around, he promptly ran for the main herd of sheep and started sniffing tails. This caused some consternation from Casper, the new ram, so much so that after we got the old ram out of the herd Casper had to mount a couple of ewes just to establish his rank. This is a good thing, as we have seen some breeding activity but not as much as we would like to see. I personally would like to see him lose 10-15% of his body mass due to an unrelenting focus on getting everyone bred as quickly as possible.

I spent an hour grooming Gizmo. It has been a long time since I have taken the time to totally strip all of the loose hairs off of him. He looks great! I should probably do it more often but he doesn’t particularly love this endeavor and I feel like I am picking on him when I do it. Which would be why he does not get stripped very often.


On Sunday I spent an hour and sanded down a piece of maple for Annmarie to practice the laser farm pictures on. We are going to laser engrave all of the turn of the century farm photos we have onto wood and mount them on the dormer in the kitchen. We are hoping to do around 20-25 pictures. So I have a lot more wood to sand!

I will be supporting the hay growers for another year.

Steve HardinLeave a comment

Well it’s been a continuation of 2020 issues. I did not get any fields planted. I am going to focus on (#1) at the far end of the property. I will keep it idle all next year and keep it cleared of all weeds and growth. This will let me pick rocks and get it all smoothed out and ready for grass seed in the fall, September!! I need to pick about 6 tons of rock out of it. It has about 2 acres that are really bad and they need some serious attention so I don’t break the sickle bar mower again. I will be placing my order for more hay early. I will also need to find some small bale growers nearby. I don’t want to have to drive more than about 30 miles each way. It takes multiple trips to get enough hay for the sheep.

It is snowing today. The first snow of the winter and according to the weatherman we might have a severe winter with high amounts of snow. Since we already have over 18” of rain for the year and this week got 1.5” of rain in a 24 hour window I am thinking the weatherman is correct. Our normal rainfall is around 12” this is causing us to have to rethink how we are going to work our fields.

Annmarie and I worked on using some surveying equipment to tell the rise of the property from our irrigation pump to the house (about 13’) and then onto the top of the ram pasture. She is going to plan for 30’ of lift and we are going to purchase a new pump and pressure switch setup. It’s 600’ from the pump to the house. We are going to water a few acres and plant in the spring. We need the pasture to stay greener longer in the middle of the summer when we have zero rain. Irrigation set up, spraying and field prep (#1) will be the focus next year. Get one field done then next year move onto another.

Feeding of all the animals starts in earnest today as there is now snow on the ground. I am headed out soon to push bales out to the cows and sheep. Five sheep will be sorted off today to go to slaughter. That will be the last of the weathers and we will have sold off all the lambs before the end of the year. I am going to not use the horse trailer and put the racks on the pickup. I don’t want to pull the horse trailer in the snow tomorrow. I will have to take my work clothes in with me in the am as I am going to have to catch the sheep one at a time and put them in the back of the pickup. I am not convinced I need a ramp just yet. There is an old one on the property but it needs some work. I may fix it next year when I fix the post hole auger.