Fencing again.

Creek crossing with no fence in place.

 We put up the temporary electric fence on the back hillside.  The yard deal just did not work out.  I still needed to cover the creek crossing and about 30 feet of fencing on the hillside.  It took three tries of stringing the fence to get it the way I liked it.  That doesn’t sound so bad but the hillside is very rocky and it was hard to find places for the poles to go into the ground.  I am sticking with the cow panel concept for creek crossings.  It is just easier.  If needed the panels can be lifted and moved fairly easily (doesn’t take hours on end).  I got the upper creek crossing done and then used some wire mesh to cover the last 30 feet of the electric fence. 

Creek crossing with fence in place.

I then went up on top of the hill and started working on getting the barb wire moved. I rolled up the bottom strand and cut it loose from the fence.  There used to be several rock cribs on the fence eons ago but they have disinegrated into a pile of rocks with the occasional piece of wood sticking out.  I needed one to pull the woven fence tight.  Luckily, right were I ran out of woven fencing is where an old rock crib used to be so I implemented my new rock crib plan and used a cow panel.  I used a 12 foot section and formed it into a circle and then bent the cut bar pieces around their neighbors.  It is mighty sturdy.  It took a lot more rocks to fill than I expected.  I had to toss rocks for over 20 minutes to get it full and the rocks were right next to the new crib. 
This is the design I saw when I went and picked up the cows in Antelope, OR last year.  They didn’t add the wooden post but I like nailing the fence to wood so I added it.  My total cost is $20 for this crib, not bad at all.  The sheep finally came out and explored the back hillside.  We will see how they do overnight. Tomorrow, I will finish getting the other two wires removed and then I can raise the four remaining strands and attach the woven wire.  Once that fence section is completed we can run the electric fence straight up the hillside and open up about 400% more pasture than is fenced now.  We opened the gate and are going to allow the horses to roam the upper pasture.  The fence won’t keep the sheep or cows in but since the horses won’t cross the creek and don’t usually try the fence we think they will be okay. 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s