Haying is not going smoothly

It has been a long two days. I worked a 19 hour day between my paying job and the farm. The lights we installed last year are really helping. The weather was beautiful and I was able to use the rake while wearing short sleeves and even once the sun went down it never got super cool. I just kept going. Until I broke the rake. It has two legs off the back and square tubing that is bent 30 degrees. It broke right at the bend and this ended my raking at 2300 instead of midnight like I had planned. So now the new welder needs to get in play again and fix this issue. I want to be able to reinforce this angle and purchased some angle iron and flat iron to be able to make this happen. I am going to need to create a spot in the machine shed where I can store all of these scrap metal pieces to use for various projects.

Mr Professional has been out of service for the last couple of days and was returning to the farm today. I gave him the good news that I had broken the rake. But I wanted him to stay focused and just get the old John Deere 336 baler up and baling the hay I had rowed. We need bales made! he got it going this afternoon and in under one hour made 200 forty pound bales before it made a noise and stopped working. Turns out we need a new bearing. I had to come home early and take a nap and had enough time to run into the parts store. I was running on empty and could not keep going. I got a bearing, picked up a sandwich for us to split and headed home. The bearing looked weird but it was a part in hand. Mr Professional was already out in the field making round bales. I looked at the broken baler and broke out the repair manual. Come to find out we needed the gear box bearing seal. All of the oil had leaked out and according to the book we need to pull the entire transmission out of the baler! So this will not be a two hour fix.

I went out in the field just as Mr Professional broke the mini round baler. He took the covers off and the shear bolt was broken. The problem with this is he took the tool bag out of the canvas bag on the tractor. He violated the tool rule!! We both know that the tools have to be on the tractor, this is why we have a special bag with all of the correct sized tools to repair the baler. So we had to go back and get tools and shear bolts and then he left me to go work on the old John Deere Baler. I started in on it and kept getting both gears to turn when I turned the baler splines. The internal gear should be attached to the shaft which should be stationary as the tractor is not moving. The only reason it could move is if the same gear insert problem we just welded on the other side happened on this side. My gut said it was the problem. I was texting Mr Professional who kept telling me to just replace the shear bolt. Hard to do when the gears won’t align. I was saved by a call from work and I had to go into the hospital, problem was I am dirty and covered in grease. I went home, turfed the problem to Mr Professional and went and got cleaned up. Big surprise 30 minutes later he is pulling it into the machine shed. The exact same problem occurred and it needed to be torn down to expose the gear so it could be welded to the insert. I was called off of work but I was now clean. I ended up doing some dishes, putting away laundry, watering my plants and starting Roomba. I even took the time to work on the blog!! I want to get to bed before midnight and I will need to be working nonstop after work for the entire weekend to get the hay thing under control. I am hoping we can get the bearing tomorrow for the old John Deere. We made about 200 square bales and 25 round bales. The square bales are around 40# each and the round are calculated at 50# but probably weigh closer to 65#. We will need to weight some to get an accurate count. So about 4.5 ton are baled and the property owner gets half, we get the other half.

It only took Mr Professional two hours to tear it apart weld it and put it back together! It took 8 the first time on the other side. It is 2230 and he is out on the little tractor in the dark making round bales. I am going to go to bed so that I can get at it tomorrow afternoon and on into the night also. It is nice to work with someone who gets it.

Snoop, the alpaca, is so lazy he is laying down and eating baled hay off of the old baler!! That is lazy.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s