Sunday morning we went out to do more fencing. The Apprentice just keeps coming back for more, which is a good thing. On the way out to field #1 we passed two dead lambs! Both kills occurred in field #4 near the barn lot, one near the old well and one near the dry creek bed. The one near the well was about 2/3 eaten and the other one was barely touched. After some righteous anger outbursts, now there are only 50 lambs to sell, we continued on to field #1 to fence. I did text the person who was supposed to come buy lambs on Monday. They eventually texted back and had some issues of their own and will not be able to come get lambs until Saturday. So we need to keep all 50 alive for one more week.
When we were installing the H braces we used a rolling measuring wheel to mark out 315’ approximately as each roll of woven wire is 330’. The plan was to be able to tighten one roll of wire at a time. A single roll weighs 185# so tying more than one together and trying to get it tight is brutal. It’s hard enough trying to get 185# of wire to stand upright using a hand tightener. I made sure and brought along a four foot section of pipe to use as a cheater bar when the tightener got too hard for me to tighten by hand. This allowed me to get another 6-12 inches of tightening.
On Saturday the black walnut tree was fine (see pictures from previous post) and then this morning the thing had split in half! It looks like there was a natural wishbone and the amount of walnuts caused the tree to just split in half. We are going to let it see if it can live by spending half its time on the ground. Who knows, maybe it will survive and do well. The turkeys roost in the tree also so maybe we should blame them instead of the huge number of walnuts.
We fixed the H brace and then tightened the fence to it. Once that was done then all of the T post clips had to be installed. I showed the Apprentice how to do this but it takes quite a bit of practice to be fast at it. I am doing about 2/3 of the fence. But I have had a lot of practice! We then did the wooden stays. This really makes the fence look good and it keeps the animals from pressing down on the smooth wire. We then rolled out another roll of fencing and got it up! Due to to curved nature of this fence we had to go on the outside of the railroad tie H braces in two spots. We clipped and stayed that section and then rolled out another 330’ of fence and called it a day. We are both getting very tired and sore.
I opted to do coyote patrol that evening and night. We don’t own a spotlight yet (it’s on order 300k candle power). But the moon was supposed to be out and I lined the pickup headlights to cover the area and used a powerful flashlight. I stayed out there from 1800-0000, 6 hours and never saw a single predator. Honestly, this is the most stupid problem ever. I am looking into a thermal scope and a flat shooting rifle. What we really need is a drone with a thermal camera on it that can be auto launched, flown over the farm then allow it to auto land back at it’s starting point. This way I would know whether to go out and deal with the predators. I am also looking into some thermal binoculars. The thermal binoculars and the spotlight with a good scope might just be enough. I have done the math, a protection dog costs about $1600 a year by the time you count for food and vet costs. This is a cost that continues year to year. A rifle and binocular cost is a one time event.
Stewart Creek Somethings 