Stewart Creek Somethings

Friends of ours are trying to sell their farm and wanted us to take “Baa Baa” back. The wife had tamed down one of our sheep and it was a pet. I had the stock rack on the back of the pickup and Mr Rainman and I drove over. The wife got Baa Baa back into an old kennel pen. I went in to grab her. Holy Smokes!! Our rams are about 150#, this ewe is so fat that she has teats and has never been bred. I put her at a solid 225#. Mr Rainman and I had to get on each side of her and drag her by her collar to the pickup. It took three grown men to get her up onto the tailgate and into the pen. I was trying to pull down the gate and it got stuck then loose suddenly and hit Mr Rainman’s right hand. This resulted in a lot of pain and swelling and a small amount of blood. (It’s not broken, he had an X-ray). When we came back to the farm we just backed into the field and let Baa Baa jump out of it on her own. Surprisingly, she did not have any trouble jumping down.

Mr Rainman worked on mowing cheat grass in the fields while I tore apart the baler and fixed it. I needed to replace seven pickup teeth and one of the spacer tubes. I stripped about half the screws on top and had to grind them off, so painful. Luckily, I had lots of spare screws. It took me a few hours but I got it all torn down and put back together. I hate doing machine repairs. I know how but I never learned to embrace my grease monkey side.

Once I had the baler back together and the baling tool bag full of needed tools, only the ones needed, I went back to digging the trench for the French drain under the hay room. This project is going to take a while as I am down to using a Polanski to dig out the last eight inches. There are a lot of palm sized rocks that are impeding any rapid progress. The trench is too deep to use the irrigation trencher. I used that to get the first twelve inches. My goal is to get this project completed this weekend.

The Gingerman came out with a spiffy painted beautiful rebuilt orange master cylinder for Little Dumper (1957 Chevy 1 ton). He managed to get it installed and got a slight amount of pressure in the system but now wants to get an easy bleed connector so he can get the brake lines vented. He said he will be back some other time this weekend. It’s the only clean part, other than hoses, in the entire engine compartment. I still have not figured out how to change the side door channel glass holders. I will have to do more you tube searching to find a step by step plan.

I finally made it back inside and as Annmarie is feeding the dogs their evening meals I suddenly start hearing her screaming “mouse, mouse” and running out of the laundry room. This was very confusing for our older Border Collie dog who is named Mouse. He just wanted food and Annmarie just wanted away as she had scooped up some dog food and a dead desiccated mouse. We knew we had a mouse downstairs in the laundry room but I had been unsuccessful at catching it in a trap. I finally put out some bait poison in the closet where we keep the animal food. The mouse must have eaten some poison on their way to the all you can eat buffet. The lesson here is to not get greedy!

Annmarie vowed to never again feed the dogs. As this was no treasonable she now refuses to reach into the dog food container until she has shined a light in it to check for any mice. When I heard her yelp I thought the mouse was alive! The dog, Mouse, thought he was in trouble.

The house is getting sided. We thought they were at a standstill but had not noticed that the fascia was getting installed. This week our new double hung window for the master closet should be installed and they can get the trim up on that side of the house. Pretty quick the new siding should be going up. It’s starting to look like progress now!