Stewart Creek Somethings

It’s that time of the year again where I take the much needed Staycation. As always, this time of the year I will be working on getting ready for winter. This also means I will be attempting to finish up a few projects I have laying around.

Day 1 staycation :

Saw me going to town for half the day. I had to get the new diesel pickup titled in our name. I also washed the exterior of it and spent about thirty minutes at the car wash vacuuming out dog hair and leaves. I got some wipes to wipe down the interior but they are too wet. I need to take a roll of paper towels out when I use them to dry the plastic afterwards. I found a plastic tool holder area behind the back seat so I will be able to keep a few things I use on a regular basis back there. I bought four new tie downs and they will be stored in it. I may put a pair of gloves in it also plus a set of battery jumper cables. I also purchased a steering wheel cover and some new floor mats. I almost got some seat covers but I was not sure they would fit. I will do more research but I need to get a heavy duty set of inexpensive covers for the front and back seat. The seat covers will have to wait until after I get the steering fixed and the new shocks installed.

I attempted to buy hose clamps while I was in town and could not believe the price at $3/ea. I ended up ordering them online for $0.35/each and will wait the six days until they come. Yes, I had to order more than the 10 I needed but I usually end up using them for something. I just need the 1/2-3/4” size to fix the black poly pipe in the lavender. I accidentally cut it with the hedge trimmers a couple of weeks ago.

I was going to finish the window trim around the mud room window but did not want to drag out the table saw so I attempted to cut the board longwise with the radial arm saw. After the board exploded in my hand I decided that it was not a great idea. I need to find more wide boards then I will run them through the table saw first. I gave up on this and went and sharpened the chain saw and went out to the old chicken coop area and hacked on a tree. The tree keeps growing lower and lower so it needed to be raised back up so that we could see out past it and I could drive the tractor under it. I knocked all the limbs I wanted off of it and left the branches laying around so that the sheep could eat all the leaves off of the ground. The nice thing about early in the staycation I can just pick and choose from all the items on my to do list. As I start lining things off the list my choices shrink and I may be forced to do something I managed to avoid all summer.

Day 2 Staycation:

I went out and brought the first cow feeder back to the machine shop so I could repair it. Big surprise, I needed some grinder cutoff wheels and used them all up on the Gazebo so I had to make a quick run to town. I bought 12 so there would be extras in the toolbox. I managed to not buy any DeWalt tools despite it being the last day of the sale, buy one tool and get the battery free! I just bought two 20V off brand batteries last month that fit the DeWalt and I am going to try them out. They are more than 50% cheaper than the DeWalt Brand batteries.

I was able to weld the feeder together and take it back out to the orchard. It is all setup and one side spread open so that a large bale could be easily inserted and sides closed once we start feeding the big bales. I went up to the upper alley way and got the second feeder. It was in rougher shape and required more welding and grinding to repair. I even broke out some paint and painted over the rust spots and repairs. I tried to match paint colors but the green can nozzle was plugged so black paint works. Honestly, as long as the metal is protected I really don’t care what color combination is as long as paint covers the repairs.

Mr Gingerman helped me snag some rebar and put the now clean branches onto the burn pile behind the old chicken coop. We can now see field four and the gate from our front room window. We can break out the binoculars instead of hoofing it up there to see where the sheep are at.

Day 3 staycation:

I decided to weld up the tile house number that Annmarie made on the laser cutter. I looked in every building and her office and could not find it! I had even purchased the metal for the hanger last month. I finally gave up and measured the gazebo openings for angle iron to be mounted at the lip height so a countertop could be installed. I have been piling up scrap steel in the machine shed for just this purpose. I can get a 20” piece installed that will let me use three preexisting holes in the rim of the gazebo panel. It got two cut out and edges all ground smooth. I then took them to the gazebo, clamped them in place then marked the three holes. I drilled pilot holes in the vice then finished the holes. Once I had the two outer bolts in place I realized that my center bolt is about 1/2 “ too short so I will need to buy four more bolts to get those installed correctly.

Did not manage to get outside until the early afternoon. I went out and took down the gazebo door and tried to figure out while it will not shut. I ended up beating on it with a hammer and bending parts of it with a crescent wrench. After a couple of attempts I realized that I needed a new three inch bolt that was threaded 100% of the shaft. I don’t have any so I added that to my go to town eventually list. The bolt is for the door latch so it is fairly important to have it in place before I hang the door back up.

I asked Annmarie where the house number was located. It was in her office in the windowsill behind the barn door! No wonder I could not find it. We had it there for safekeeping. It was definitely safe from me. I ended up cleaning up all the tools and calf table away from the corral loading chute. I will need to back the stock trailer up to the chute this week so that I can get the three cows loaded up Friday morning to go to slaughter. They are going to kill three this Friday and two next Friday. The sheep are not getting killed until the first of the year.

Our momma sheep are getting skinny again. The lambs are literally sucking the calories out of them. I put a protein lick out for them and tomorrow I will get some creep feed for the lambs. Feeding the lambs separately a high protein diet should relieve some caloric load from the ewes. Annmarie has a friend that agreed to take all the sheep for a month to clean up a boggy area on their property that is a little water logged. They don’t want cattle on it. It is a hay field that was too wet to get a third cutting on it. This is perfect for us.