Month: September 2025

Haying again

Steve HardinLeave a comment

Now that Pendleton Round-Up is over I can get back to farming, I need to cut the neighbor’s hay field. Before I could go cut hay I needed to do a little work on the tractors. I put the sickle bar mower on the Kubota after I dropped off the weed mower and forks. I took the John Deere and hosed it down as it was covered in dust and mud. I ended up finding a cracked cowling. As I was fixing that with zip ties I discovered the reason it cracked is that the metal support running along the inside had broken off from its plastic holder. So I drilled a couple of holes in the metal support and used my new fancy body zip ties to hold it in place. They work pretty good!

I went over and scoped out the field to be cut and moved the sprinklers out of the field. It was too wet to cut early in the week so I ended up cutting it late afternoon on Thursday. The grass was even thicker this time than the spring cutting! It was incredibly thick. I went over it twice with the sickle bar mower in opposite directions to try and ensure I got it all cut. Cutting the field has ensured that we will get rain this week and big surprise, three days later we got 1/4” of rain! I would have turned the hay today but instead I am going to have to wait 1-2 days more and let the top of the grass dry out some before turning it. I had some big thick piles so I may just have to give up and turn it tomorrow afternoon and then turn it again the next day. After that I may be able to wait two days and then bale it. I am going to have to be careful to not bale it wet. I think I can get close ot two ton (100 bales) of beautiful grass.

Our second batch of chickens are now laying eggs. We are getting close to a dozen a day now. I have a couple more roosters to dispatch. We have four now and I am only going to keep two. I did find a stash of about two dozen eggs in one of the barn hay feeders when I was cleaning out the barn. I just tossed them out the window. The hen that had managed to hatch out some chicks did not manage to keep any of them alive. I was going to be surprised if she could save that lone chick by living out in the barn with three barn cats. The new chickens need to learn to stay out of our yard so the dogs don’t get them.

I need to spend a day grinding grain. I have about 400# to grind up. It should fill the rest of my chicken barrels I have stashed in the back of the chicken coop. I will be going through about 50#/week all winter long.

Barn clean out done!

Steve HardinLeave a comment

I managed to finish getting the barn dug out this week. I figure my total time on the barn was around 12 hours. This is a far cry from the 40 hours it used to take me. Using the manure forks on the John Deere and just figuring out how to make it into most crooks and crannies with the tractor has cut way down on the hand work. I probably only had to do about four hours of hand digging. The next big thing is to haul the old round bales from the lamb shed and put them into the overhead walkway so we can use them as bedding. They are three years old and have virtually no nutritional value but will make great bedding. I used to buy straw but using old round bales has zero cost associated with it. I used to spread it out when I put it out on the floor. Now I just spread the rolled bales evenly throughout the floor and the sheep break it apart and spread it out throughout the barn. If I have a gap or two a week later I just dump another bale in the shallow spot and the sheep do their magic again. I do need to reset the chute and bring in the four feeders from outside. This will need to happen next week as I am thinking about taking some sheep over to Hermiston next week.

Annmarie wants me to work on getting the old compost out of the barn lot so the horse will quit digging in it for a snack. About 1/3 of the way into digging out the barn I remembered this so I started to put the bedding into the momma/baby area. This has a very shallow soil depth and does not hold water very well. I am hoping to increase the soil depth so I can add some seed. I figure this area can take next year’s material also and I will hopefully have something to work with after that. As I was filling that area I noticed our chickens in the front ditch eating out of the water. They had waded into the shallow water and were eating bugs out of the water. I had no idea chickens would do that! I have only ever seen water birds do that. The chickens do have all you can eat grain available so it is not because they are starving. It was pretty weird.

We had several people send us pictures of Annmarie in the Mounted Band so I picked a couple I liked to add in here. Roundup is pretty much nonstop for us with me having to work in the ER and Annmarie working and doing Round-Up stuff also so not a lot gets done on the farm except feeding animals and collecting eggs.

Our honeybees are still alive from the nuc we purchased this spring. The flowers are fairly sparse this late in the season so we have had to start feeding the bees sugar water. So Annmarie took out one frame so a one gallon frame feeder could be dropped into the hive box. I scraped it and let it gravity drain into a bucket, we got almost a quart from the one frame. We are using it all for ourselves! We are hopeful that we can get one more hive next year and then we can start to actually harvest some honey. I set the frame and wax back outside so the honeybees can clean it up and get it ready to be used next year.

Rooms are always a work in progress

Steve HardinLeave a comment

Annmarie’s laser cutter died so we got another one, this one is upgraded and will do circular items and will cut thicker material and can etch into metal directly. It has a water cooled laser. We did not really compare any measurements so when it arrived we realized it was significantly larger than her old one. I had to build a table top to go onto the top of the old TV stand we are using as the base. We also had an old Victrola cabinet in there for the 3D printer but they both would not fit. Gingerman and I made them fit but it was not pretty and did not pass the quality inspection later done by Annmarie. We agreed that a shelf for the 3D printer would take up less space and I had kept an old table leaf that I was able to cut into a shelf. I used the leftover wood from the table top to cut the other three shelves out. We may put shelves under the 3D printer but I will wait until Annmarie requests those. She will need to use the space for a while before those will be used. I may but a narrow one directly under the printer so she can put her filament rolls on it. I will need to use book ends or build some so that they don’t roll off.

I had to run ductwork along two walls to accommodate the fumes. I decided that cutting another hole in the wall to the outside and moving the exhaust fan and power was not going to work for me. I might have to do this three more times and I did not five holes in the wall. I was able to use some low profile dryer venting and keep it fairly close to the wall. I taped all the joints so the exhaust fumes stay inside the duct. This laser has a really good exhaust fan so between it and the one on the outside of the office the fumes will get moved right out and the longer path should not be much of an issue. There is a lot of push/pull action happening in regard to the exhaust.

My plants on the breeze porch are doing very well. When I got this plant it was six inches high. The only thing I seem to be having trouble with is starting the new African violets. I have always had trouble with it but this year I have not been successful. I ordered some root stimulator and hopefully that will solve my problems. I am starting to root new plants so I can get them ready for Christmas. I usually take at least 30 plants into work as presents for the ER staff. I have a couple of new plants so I wanted to offer a little more variety. I add a few plants every year to the collection. I have enough room for another six African violets and was hoping to fill it up this year. They tend to be fairly expensive when buying them at the store.

It shoulda worked

Steve HardinLeave a comment

Last week we did get a lot of stuff done. I was able to “mow” the front hillside with the animals. Normally one would think our new front fence would be sufficient, but it is not. Both the young Border Collie and Border Terrier can get past the fence, one jumps on top of it and drops just past the fence in the little spot before the rocks, the other just crawls through it. This meant we needed to get them locked up in the back garden area. They can run out into the orchard, lavender patch and back garden area. Chance, Border Collie, figured out how to jump through gate so we blocked that, then she learned to jump in the corner next to the post so she can jump on top of the gate, this requires a little scrambling but the upright post helps her stabilize. Once settled on top she just jumps down. Gingerman and I installed a cattle panel onto the top of the gate that raises it another two feet, she cannot jump it now.

Once that was done it was safe for the animals to come into the front hillside. I didn’t count on the cows liking it so much that they came in every day. It took about a week for everyone to knock it down sufficiently. Of course there were consequences, the cows broke a part of the plastic irrigation pipe that took me a few days to figure out. I could not figure out why there was a swamp in the making in one area and that same side was not getting watered. The dogs loved the swampy area, it’s cool and muddy.

We sold the last horned brown Dexter cow we owned. She was the nicest of the batch but compared to the black ones she was the craziest we had on the farm. She was very pregnant and a proven mother about six years old. We sold her for $1800. The price of cattle currently is crazy. We have of course cut the herd down dramatically last year. We will only have three cows for slaughter next year. We only have five female cows left. Our bull will come off the group at the end of the month. We will pull the rams off the sheep at the same time.

The fruit continues to come on at an unrelenting pace. Gingerman went up with me to pick yellow plums. Using the tractor as a platform is more efficient than a ladder. Plus, I get to steer and not pick fruit! We picked about 40# of plums and Annmarie made jam. We gave a large portion away and will just let the rest drop to the ground. The sheep will clean them all up.

Too much fruit

Steve HardinLeave a comment

Labor Day weekend was spent getting ready for the next thing whatever it is. Annmarie wants me to get the Dodge pickup cleaned out and the Ford diesel up and going. I bought two new batteries for the Ford and the Gingerman got them in and the pickup started. He has spent a few days tinkering with it and it is running pretty smooth. It just needs a couple of quarts of power steering fluid. Plus, he found a brand new tire weight on the ground so it will need to go back in and have the tires rebalanced. I was able to unload the sand out of the Dodge. I needed space to fit a piece of plywood and there wasn’t any with the sand still riding around in the truck bed. I needed to get the replacement throttle cable ordered for the compactor so that we can spread the sand out and pound it in place. I left the sand in the bags so that the cats would not use the gazebo as a personal toilet.

I was able to snag some shelves at a reasonable price and got them installed on the shop wall. I am going to move all my various anchor bolts into one section so I know what I have and can find it when needed. The left side is plumbing and air line brass parts they came with the organizer. Slowly but surely we are getting organized. It is much easier to find things when they are in their place.

I spent one single day doing nothing but picking fruit. I picked 24 cups of tame blackberries then about 8# of plums and then nectarines. The bad part about picking the fruit is when you pick that much you have to do something with it. Our large upright freezer is stuffed full of frozen fruit. I truly believe we have enough to get through the next year. Irregardless of that the fruit trees just keep producing. I have taken boxes of plums and nectarines to work for the produce table in an effort to give it away. So far it disappears fast enough that it doesn’t go bad. I kept track of how many blackberries I have picked in the last six weeks, 21.5 gallons! That is a personal best. Annmarie has made jam and syrup that we have canned. So we have canning supplies all over the house as we process fruit. Making your own food does take time.