I only needed 30 more minutes!

Yesterday was the day, we were going to get our tower mounted and I could call to get our new internet service installed.  Unfortunately, there were a few stumbling blocks.  I got the nephew all lined up and out so he could help.  We got the tower up onto the roof and I could not hold it vertical while at the top of the roof and slide it into the holder, I did try multiple times but the fit was too tight.  I gave up and laid it across the peak of the roof and had the nephew move the ladder to the peak and hold the end.  I discovered that the holder base could be rotated to the side on a bolt swivel. Nope it was still too tight.  I then realized that the bolt needed to come out and I was supposed to slide the metal sheath over the bottom of the pole and align the holes so that the bolt went through the tower piece also.  I want it known that there were NO instructions on installation included with all of the hardware.  I did actually check before trying  to just wing it.  It kept getting darker and darker.  We managed to get two cables installed but I could not let go until the third one was installed.  My nephew managed to get it on in almost pitch black conditions.  I had my phone out trying to give him some light while I was on the peak.  It helped a tiny little bit.  We managed to get the thing in place and tight enough it wasn’t going to fall over.
After climbing down in the dark I realized that I had mounted a head lamp to my hat just in case it got dark.  I had forgotten about it.  I ended up going out and feeding the horses and sheep before going inside at 1930 to feed myself.  

Is it a safety issue yet?

Tonight we did it, I had a late meeting at work and was afraid the sun would betray me and hide before we could get finished.  We managed to get it tightened down and level in 30 minutes and still had 25 minutes of dusk left.  We even removed the ladder from the roof and got the grounding wire strung across the  roof line and down the side of the building.  I just need a grounding clamp and to drive a six foot rod into the ground with a sledge hammer.  Its a good spot to do it but it is going to take some effort on my part.  I don’t know how to do it easily.  I have heard of several tricks but my old standby, brute force, will work well.  Tomorrow, I am calling WTechlink to see when we can schedule an appointment for high speed internet hookup!!!  Awesome time is coming to the farm.

Our new oven showed up today also.  They had said they would install it, but when they arrived they said since it was a wall oven they cannot install it because it requires someone to wire it in place.  I will have to do it, but will need lifting assistance to get the old one out and the new one in.  My nephew is getting a workout.  I am going to owe him. 

Weekends are made for catching up. I am trying to get all ready for winter. Winter is Coming.  I realize it’s a book and show motto but it’s the truth. With one of the horses needing a dry place due to some weird hoof issue we need a second covered area. The amazing thing was getting the hoof fixed on a horse was cheaper than fixing one dog. It’s no wonder there is no money in large animal care. 

I had a friend send her youngest son out to help me on Saturday. Now I do pay them but sometimes I think my various friends send me their children to motivate them to seek a higher education plan. So far I am batting over 75% heading to college after working for me. I am known to not stop, no breaks and if you let me lunch break will be at 1500 every day. I am not a fan of taking it slow and easy. I try to go at it like I am killing snakes every day. The only problem with this is I am no longer in my 20s or 30s.  

Plus, my back hurts!!  I had a known party bring her husband out to look at the old tractor. It’s gas not diesel. It’s an International not a Ford. It will not start or turnover, it needs a new starter and battery first. Then some filters and oil plus more hydraulic fluid. I asked about a new seat and was laughed at.  The farmer rule applies in this instant and I was told to just get it running. So I will order a few hundred dollars worth of parts and then we will see. 

The young man arrived via “his mother’s horseless carriage with her as the chauffeur”.  He is a young padawan and his mother is hoping he molds into a productive member of society.  We went out to the barn to clear out the old milking wooden floor.  I supplied the work gloves but he wore blue jeans and tennis shoes.  I was amazed he never stepped on a nail, but his mother is a nurse so I figured his vaccinations were up to date.  We ripped out the floor and stacked all the spare wood from the room onto the top of the horse hay room overhang.  I had to install some wooden brackets so we could make the stack higher.  At one point I misstepped and ended up falling four feet after sliding down the straw stack.  The young palawan tried to catch me but just managed to touch my arm on my decent to the wooden floor.  I managed to turn to my side so I didn’t land flat on my back.  Not one of my smoother moves but fairly typical.  I also managed to not hit my head!  My beautiful bald head seems to attract a lot of wear and tear.  The milking area needs to be dug out but before I can do that I need to put an end piece on so I don’t push the dirt under the last little bit of flooring we left.  The flooring is so you can walk out and feed the horses easily.  The padawan ripped out an entire inside leg seam on his jeans fairly early in the work process.  He kept after it, at one point I asked him what his older brother had told him about coming to the farm.  He said he cackled and stated “YOU are going to WORK!”.  We got a lot done in a few hours.  I was very pleased. 

It has been one of those weeks, i just barely get something done and then there is something else waiting that needs to be done yesterday.  I have been frantically trying to get our high speed internet pole and guy wire supports installed.  I managed to get the anchors all attached to the roof.  The hardest part was getting all the new supports installed under the roof so they would not just tear out the old roofing.  The walkway worked great and made it a lot easier to get around.  I ended up having to move the 32 foot ladder by myself and then extend it out alone.  I do not recommend that, the ladder is very heavy and incredibly awkward once you start extending it out.  It works great once you get it in place but not very easy to handle while getting it there.  I tweaked my back and have been walking crooked and hunched over for the last three days.  The only thing left is to actually insert the pole and attach the three guy wires to the anchor bolts.  The problem is it takes a second person, I will need to stay on the roof and use a level to make sure the post is upright and to connect the third anchor.  We need to tighten all three at the same time to make sure the post doesn’t get tweaked.  My helper has to be able to move the ladder by themselves and the tin roof needs to be dry for my safety.

Just when I think the farm cannot surprise me something else does.  I was in the rafters of the machine shop installing the anchors and there are several pieces of loose wood in the rafters.  One of them kept drawing my attention.  The board was very long, wide and curved on either side with a flat bottom with these tiny pieces stapled in even intervals.  I had to stare at it for three days before it dawned on me it was the old stair rail top from the farmhouse!  Had I known it was there I would have used it when we rebuilt the stairs.  I had no idea it was even there.

We have sheep babies everywhere!  The first batch has been tagged and banded and now there is a second batch in the baby area that are ready to go.  This weekend we will tag and band all of them and get ready for the next wave.  Annmarie made a program to track them on our iPhones and it is super fast, super easy and super quick.

The horse, Mika had to have some hoof thing cut out and filled with plaster by the vet.  Its sad that all that on a horse cost less than an overnight spay on the family dog.  It was very affordable.  So now we have to work on keeping Mika’s foot dry, this has necessitated the need for me to start cleaning out the old milk shed area of the barn.  I had been storing all the old lumber there.  I will need a different spot now.  So tomorrow we will be moving the wood out and then cutting up the old floor and storing it for reuse!  I will need to make a new handrail to keep the horses out of the barn.  I just plan on reusing all the old wood from the floor.  I have several small metal gates so I am going to see if I can get two of them to use as new doors.  We have a metal panel bungied across the opening.  It is not the best setup, but is currently working for us.

Center mount for pole installed

old handrail from the farmhouse!

Walkway and supports installed in roof

Babies every where!!

The light works!

Today was a good day!  I really feel like I got over a large hurdle in the last few days working on the farm.  Getting power to the machine shop was a big project and took me almost seven days of work to get it all done.  I crawled under the bridge and installed conduit and two junction boxes.  I had Sarah help me by guiding the wire into one box while I pulled to the other box.  Brian came out this morning to mow the lawn and chew the fat.  We had this discussion about home improvement projects.  He was telling me about burning up a drill on his last project.  I broke one of my battery Makita drills trying to get holes through the pressure treated boards under the bridge.  There is a reason I have a spare drill and impact hammer.  

Our first triplets of the year.

While I was attempting to finish the power our sheep started to have more babies.  I was pointing the new babies out to Brian when he spotted triplets on the hillside.  I only saw two and told him twins.  Annmarie went out into the field and he was correct.  We have live triplets and they are all doing well and momma is nursing and paying attention to all three.  The little white and brown one is a girl so we will be keeping her.  This ram is throwing nice healthy babies and the colors are amazing.  Those triplets are bigger than some of our twins last year.

I got all the wiring done and then flipped the breaker.  I walked out to the machine shop and turned on the light, it works!!  I was amazed.  The next big test was to measure the voltage at the outlet to see how much drop there was with all the distance.  I could not get a reading, I remembered to reset the GFI outlet and still could not get a reading, but the light works!  So I trudged back to the house blaming the outlet, it was a used outlet that I had written a note to myself on the box, “may work”.  Half way to the house it occurred to me that I should look at my voltmeter and see if it was setup right, the selector switch was right but I had used the meter to check continuity last so I had to unplug one of the probes and put it in a different hole on the voltmeter, a whopping 118.9 V.  Pretty dang close to 120, that I am betting it is good enough.  Most electrical items will work on a small range of voltage as it is not consistent around the country.  We like to think it is but it isn’t.  The next big test will be tonight when it gets dark, will our old walkway lights work?  They have been out of commission for five years and I did not change out the lightbulbs.

I had to wear my outside slippers all day today as the top of my right foot is still very swollen and sore where I connected to the ram’s ribs with the top of my booted foot.  My foot still hurts a lot, but he is totally unfazed.  Today he did not bum rush either one of us.  Maybe he is learning, or else we are.  

Another single

Probable right broken foot. Courtesy of the ram

The light really works in the dark!

We came back from the movie and I had left the machine shop light on so we could see if it is enough light to get hay and feed.  It is plenty of light for that simple task!  I wouldn’t do brain surgery but for getting hay it is perfect.
Both of our walkway lights work also!  It was amazing to come home in the dark and not have to use our cell phones to get down the concrete stairs to our bridge.  After five years of rest they still have some lumens left.  The next big thing is to get the three guy wire anchors bolted into the machine shop roof so we can get the tower installed.  Once that is done, its high speed internet time!!

Annmarie and Sarah moved the momma and babies into the baby area.  We want to keep them separate until they are tagged and banded.  Annmarie made a tracking program for our iPhones so we can instantly update it with any babies and their mothers.  It is very handy, much better than the paper notes I used to do.