Author: Steve Hardin

Spring really is coming

Steve Hardin1 Comment

We have finally given up on the sheep having any more babies. So we tossed the last five ewes in with the rest of the main herd. It is a lot easier tracking one herd than two. There is a third (now second) herd down below. They are the eating ones of which we already have nine sold. We know spring is here as I have commenced the inaugural lawn mowing of our front yard with the sheep. It takes 2-3 days for the sheep to tear the lawn down. They like the shortest grass so clumps of tall grass tend to standout. I had just tossed out a pound of clover seed on the hillside before letting the sheep out to graze. They will push the seed down into the ground. The clover also does great with trying to stay alive after getting eaten so it will spring back twice as thick as it was before the sheep grazed on it. We are finally starting to get some clover all over the hillside now. Due to the clover we have now given up chemical weed control on the hillside. All thistles and stinging nettle are removed with a shovel. I spent a couple of hours this weekend digging weeds.

Since the bees have survived the winter I dug up a couple of patches of dirt and planted flowers on the hillside. I will need to add a small fence around them to keep the dogs out but we should have blooming flowers in 45 days. We are going to use our circle planters in the back yard to plant marigolds in and around our garden. We are hoping the marigolds will help with insect control. We are trying to get more flowers growing for the honey bees. I have a couple of other spots I want to toss out some flower seed on.

Saturday, Meathead and I worked on getting the five new half wine barrels ready for herbs. I drilled holes in the sides so that water could drain and then she filled each barrel with five gallons of gravel to cover the bottom. I would like to say she carried a full bucket of gravel but that is not really realistic. She carried it in two half filled buckets. We had a long discussion about me using the tractor to scoop it up and drive it around but by the time we go through all of the gates and still carry it the final way in a five gallon bucket we have not saved any time so she got to carry gravel in buckets. It takes four buckets of soil to fill the barrel the rest of the way. We have a big tote with gardening soil in it that we are using to fill them.

I took chance out with me to put the sheep in and she did great! The picture of her above is in the lamb shed when we were feeding the ram and bull. She kept them from coming into the shed when I opened the door to feed. She did so well after everyone was put away I let her off the 30’ lead. Huge mistake, she took off running and would not listen to me. I may have gotten upset and hollered repeatedly which caused her to look at me, come within six feet and stay out of reach. I finally calmed down, bent down on one knee and called her, she came running and got hugs and licks in. She is too smart for her own good. It turns out that Annmarie had tried to use Chance to get the sheep out of the yard earlier in the day but only had her on a a six foot leash. The puppy did well enough that Annmarie let her go and then Chance dove for a lamb and would not let it up. This incurred the wrath of Mom which may explain why she was so good working the animals with me later in the evening. Once I got her back onto the lead I used the alpaca as training fodder. This works for the dog and me and the alpaca don’t really care for the dogs so it gives Chance a shot at moving a difficult animal. She did really good.

Our second bee hive arrived, I just need to assemble it. We are going to keep them in the lavender patch. I was out working today and had 4-5 honeybees land on me. I am unsure what they were looking for and as long as you just ignore them and don’t accidentally squish them they are harmless. It takes a while to get used to ignoring them.

2022 farm finances / 2022 chicken financials

Steve HardinLeave a comment

INCOME: $6380

Sheep sold 25 lambs for $2000

Eggs sold $600

Cows sold 6 cows (2/3 of profit) $3780

EXPENSES: $18,440

Truck = $850 for repairs

Chemicals = $0

Conservation = $0

Custom Hire = $0

Depreciation = $0

Feed = $7469= cows $7250 alfalfa is way up! This is our single biggest expense. This year we are going to try and hold over on some grass and cut down on the grass harvested. I did not do very well with tracking the dog, chicken and sheep feed last year. I could not find very many receipts. Chicken food is now $18.50 for 50#. At the beginning of the year we were only paying $16.50 its an 11% increase.

Fertilizer = $0

Freight/trucking = $0

Gasoline/Oil/Fuel = $1096, tractor fuel cost $1062 using 205 gallons, I now have an 100 gallon tank that I filled twice last year. This is almost triple what I was paying.

Interest on Loan Equip = $0

Insurance = $1947

Rent/Lease vehicles machinery/equip = $0

Repairs & Maintenance = $5420, Tractor $1766, sprayer $400, truck $1574, side by side $ 153, water pump $1400

Seeds/plants = $348, we bought some triticale seed and planted it this last fall.

Supplies = $3992, gloves over $250, 10 yds gravel $250

Taxes = $1181

Utilities = $0

Vet/Breeding/Medicine = $1298, we got a new Border Collie puppy. She got sick once and had to be spayed. So for everyone that keeps telling me to get a guardian dog they really need to look at the vet and food bill plus the purchase price on the dog and calculate out their losses to see if its really worth it.

Purchased Animals = $1125, we had to get a new bull after 12 years! It’s time to get some new genes on the farm.

Total for 2020 was a loss of $12000. We did better on keeping some of our costs down last year. This year we are going to focus on selling our leftover hay from the barn and machine shed. We are going to put up less hay, only fill the barn. We are going to spray the weeds 3-4 times this year, I have some old fertilizer I got off the neighbor and we are going to try it for the first time. We have one more length of fence to install alongside the creek so we can give the animals another 7 acres to browse on. In the fall we will work on replanting another half of the bottom down by the school house. We keep trying to improve the forage available for the animals to eat. Having the ram get off cycle really hurt us on lamb production.

 EGG Production

Well, the chickens lost money this last year. The predators killed me and the wife says I need to focus on predators this year so they don’t kill half the flock. I want to raise the prices again, we currently charge $5/dozen but she tells me we need to double down on timely egg collection and some serious predator control this year before we can decide to increase the prices. The price of feed has not gone up since we raised the prices last year so I am going to keep them the same for now.

We averaged 21.8 laying hens for the year and currently only have 13 hens. We collected on average 6.3 eggs/day for a lousy production rate of 27%! I am sure this is my worst production rate ever. Our monthly feed weight was 154#/month at a cost of $54.25/month. The crazy part is our feed cost was 28 cents/egg or $5.62/dozen. Our total cost for the year was $6.18/dozen eggs. We sold them for $5/dozen. We ended up losing $100 on the chickens last year. Now mind you, every time the weather goes crazy or a raccoon showed up the chickens refused to lay eggs. This happened quite a bit throughout the year. We have 12 new chicks and will work to try and get another 12 to get our numbers up for this year but those chicks won’t lay for 6 months.

Lamb update

Steve HardinLeave a comment

This weekend some time had to be devoted to the sheep as always when we have lambs. I used to think it was special to spend a few hours in the barn but with the lambs and constantly changing situation I have just realized that I will be out in the barn for a few hours. I have been trying to clean up the old house porch which means burning scrap wood. I had a gallon of beeswax finish that was done and was holding saturated rags. I tossed it on the burn pile to get it cleaned out before tossing it in the trash. Unfortunately, I left the gallon paint can out in the pasture and one curious lamb got it stuck on its head! The dummy could not get it off of his head. This was noticed and said offending bucket was removed from said idiot’s head. The bucket went into the trash can and the lamb went off on its way as if this was a normal part of life.

I pulled down three jugs. We only have three set up now and there are no sheep in any of them. Not having to haul water is amazing! We are so glad we only have to do it when the ewes are in jugs and otherwise they can get their own water.

I have started to toss out four bales outside the barn so the sheep can pull the bales apart and eat what they want. I also gave in and opened up the barn lot to the mommas and babies. So they have another 1 acre area to roam around on and to eat the grass. I had been keeping them off of it so the grass would grow. It had grass several inches tall on it. If we would ever warm up the area would shoot up with fresh grass. The weather keeps driving the sheep back into the barn. They don’t mind a little rain or sleet but they don’t like a downpour or pea sized hail.

The sheep all have their own personalities but some tend to stand out amongst the others. This little lamb is easy to spot in the barn. It wants to run off and do everything by itself. It is super curious and will come right over to you looking for a treat. It also gets lost and distracted easily. When everyone runs off to the green pasture it stays behind and hollers because it is alone. This morning I had to chase it out of the barn area and out into the pasture as it could not seem to grasp the concept of leaving the barn to find their friends.

The back creek is running from the melting snow but since the mountains keep adding snow we have not had a noticeable rise in the runoff. I took the tractor and drove through the creek to go to the wood shed and get bee supplies and drip irrigation supplies for Annmarie. They now go in her little garden supply shed by the garden. She is eager to get out in the garden but it keeps freezing at night. I scraped the car windows last week. Maybe by mid April she can start getting plants in the ground. She has started herb seeds inside the house this weekend. I got a heat mat for starting cut propagation attempts on my house plants, so the seed starts are taking up most of the mat now. My African Violet starts are starting to take off and I may be able to get 12 more plants. I am shooting for 25 plants in the next couple of months. I have about 10 Jade plant starts going right now and have managed not to kill any yet.

  • Date of update- April 2, 2023. We think there may be 4-6 ewes left per Annmarie, I think there are only two left but I would not bet more than $10 on my opinion, Annmarie is usually correct!
  • # of Lambs born – 54
  • # of ewes who have delivered babies – 33
  • # of ewes still pregnant – 8 in area, I don’t think they are all pregnant
  • # of single lamb births – 13
  • # of twin lamb births – 19
  • # of triplet lamb births – 1
  • # of bummer lambs – 5
  • # of lambs who died in first two weeks – 3
  • Total # of lambs on farm -46
  • % birthing rate- 164%
  • % production rate -139%
  • % survival rate at birth – 100%
  • % survival rate at 2 weeks (bummers count as death as they need help and leave the farm) – 85%

Animals think spring is coming

Steve HardinLeave a comment

Along with the great weather the animals are thinking spring is coming! Annmarie went to check on the bees and they are fat and happy. They have tons of pollen and are bringing it back to the hive. We have not seen a single flower but they are getting it from somewhere. They just ignored her while she took some pictures. Hopefully she can get into the hive next weekend and we can tell how much honey made it through winter. If there is lots I would like to steal some more. So we will see hopefully next week.

I let the puppy out into the ram pasture to tear around. She ate lots of sheep poop and ran all over. The sheep were still in the barn so the only animal she could try and terrorize was the horse and she teases the dogs by standing next to the fence. I built a fire and cleaned off the old house porch and burned lots of scrap wood. Chance did come when called and I was able to tell her to “go home” and she ran for the front yard. She is super smart, unfortunately there really is such a thing as too smart. She has been jumping up on the table outside and digging. So far not under the fence. But we found out today that the reason there are dog mud prints on the new office door is that the puppy has learned to open the door!
We have one of those curved handled doors and she is reaching up and opening the latch while pressing on the door. She opened it twice yesterday so we are back to using the dead bolt to keep the door purposefully shut. She will hardly come in and visit with us. She comes and gets loves and hugs then wants to go outside. She sits on the front porch or lays by the door to make sure no one sneaks up on us. We did not teach it but she takes it seriously. Mouse has been picking on her to establish his dominance but she is starting to get tired of it. She is starting to bite back, I expect her to be the dominant dog in another three months. She is just not putting up with his shit anymore.

The sheep are still lambing! We are definitely giving them a small area only so the ram can chase them down more efficiently. This lambing forever is painful. We only had two ewes give birth this week, both had twins. I spent a bunch of time out in the barn on Saturday cleaning out feeders and reloading everything with fresh hay. I really want to get out here and install the 12 V lighting system! The DeWalt hack to the rescue for lighting. But I need to get the wife’s office done first. I told myself no other projects until I get that space completed!!

To that end, Annmarie came up with a fairly brilliant idea, it’s one we have bantered about but I could never see it before. She talked about a rough camping space in a yurt up in field four. We could put it next to the bluffs and raise it about four feet in the air so the animals could not get into it. This would raise it up just enough to give it a great view of the surrounding bottoms but still allow the bluff to protect it from the worst of the weather. Elevating it would also make it easier to install a composting toilet and a small solar panel with a 12 V marine battery. Heck, I might even just be able to use the DeWalt hack and give them a couple of batteries! The internet is spotty so you won’t be using an electrical device much. It would have a small propane heater and double burner propane cook top. Maybe not even have any source of heat. But that would limit the time of the year people would stay and it is pretty in the winter, although we would not be able to have running water in the winter. In the no freezing months we could have 150 gallon water tank. It would not be terribly expensive to get setup. Let’s get through this year and see if it is something we want to do.

The neighbor moved his Angus cows in the field just across the road from us again this year. Our old bull, Thor, is a pain in the ass and he goes down to the huge culvert under the road and crawls under the fence and under the pseudo fence on the other side therefore getting into his cows. This then prompts the owner to text us and we have to go get him. Now he worked hard to get over there and is never super keen to just come home. I chased him around with the tractor for about 30 minutes before he went back to the culvert and I was able to move a panel to lock him in that area. Mr Professional came back out and before we could formulate a plan, Thor just went back through the culvert. He just ducks, squats and bulls his way through. We chased him all the way up to Alcatraz through the bottoms and then our yard and into the impenetrable pen. Now that he is in there with the ram and other two whethers we will have to feed every day. It took 1.5 hours to get him corralled. I am so glad we are taking him to his soon to be forever home! Only six more weeks to go before he is no longer a problem.

Office is as good as done!

Steve HardinLeave a comment

This was a very productive weekend! The office took up half of the weekend, not the exciting half but definitively the productive half. I spent a couple of hours on Friday pouring over the instructions on where to attach the door hangars. They only needed to give one measurement, the distance from the top of the door to the bottom of the wheel. No where in the entire instructions, which I kept from last time, did they bother to give that distance. They gave some other random distances and spots on the door that were wrong but not the one I needed. I ended up getting a couple of clamps, cutting two small pieces of wood to the hanger and trying to get it to fit onto the track. I managed to find the correct height, then I measured the door from the floor, subtracted the gap at the bottom and the gap at the top and came up with a door build height. I rough cut the 16 foot board at 82” on one side so I could get them out of the old house alone. It took two of us to thread those 16’ boards into the cramped space. I stacked the boards in bunches of five then cut off both ends at the same time so the boards all matched. Mr Professional came out and we set up a workspace out in the yard. I was initially opposed but after assembling two doors next to the saw in the sunshine, it was nice.

I had come up with the design of using the 2” wood for the X but I had a star pattern drawn out on a piece of cardboard and before I could stop him Mr Professional had ignored my pattern and we went with the hollow X. The next day we tried my pattern but I realized that I would have to cut every single piece in half and I was afraid it would cut down the structural strength of the door. We made it out of tongue and groove that we also used on the walls. We glued them then used pipe clamps to squeeze them together and then screwed on the cross pieces and hung them up on the wall to dry. I think I could have perfected my X cross pattern if we had made a third door. They are not exact but you have to pay attention to notice the difference. This was done on purpose. The direction of the long X pieces on both doors was deliberate. Ideally the screws would all line up but we had to miss knots in the wood and this is not a factory thing, it’s supposed to mimic a barn door and most people don’t measure out placement for screws on a barn door. I just need to rub on the finish for both doors. It will only take an hour but today there was no time.

We needed to get the Glowforge laser engraver all set up. I had purchased duct work to vent it out the side of the room but I failed to account for the actual width of the laser. I ended up running to town and getting metal dryer vent solid ducting and a clamp on connector. We then just drilled a hole right out the back of the laser through the wall and mounted the actual fan outside the building. This means we had to make a shelf outside and we will have to build an enclosure around it and put on a slanted roof over it to shed water from the corner drain off the roof. To get the fan controller through the wall I unwired the controller from the fan allowing us to drill a small hole and use a piece of copper wire to pull it through. This then meant there was no power for the fan outside the house. So I had to kill the power, get into an outlet box and drill out the back of the box to outside and wire in jumper power to a new outside box. This was done and we were able to verify that the fan does work. We added a screen to the inside of the vent so that birds could not fly up the vent. I need to get a waterproof cover that allows the plug to stay plugged in.

We had purchased a sheet of cork 2×3’ long to put behind the Victrola wooden screen we removed from the front of the Victrola. It turned out pretty nice other than I mounted it on the wrong side of the desk. I hung up the office clock after I ensured it was going in the desired spot. The only thing left now is to finish the insulation in the attic, install the attic vent fan, getting freezer room floor installed and then completing the wiring in the second room. Luckily, the only thing left that the wife can see is rubbing on the oil finish on the door, a mere 1.5 hours of labor.