Farm

Three more projects

Steve HardinLeave a comment

We got back from California last week and I proceeded to dig back into the farm on Sunday. Tex watched our animals while we were gone and everyone survived. I decided I needed to try and finish up the short stretch of fence we have been at for a month. I finished filling the rock crib on the left and topped off the other one that Tex had filled. I then went up and started to dig a hole for the middle support railroad tie. The ground is pretty much fist sized rocks the entire way down. I managed to get about 1.5 feet down and decided to call it a day as I had enough dealing with rocks. I swapped out the box blade on the tractor and hooked up the mower. I wanted to try and get the property out by the cars mowed down. I also figured I could mow a path for the new fence that needs to go in down by the creek. My grant is approved so now I just need to get cracking on the new fence. The first step is to use string and spray paint to mark out the fence. Once that is done we can start pounding T posts into the ground, after I buy them. The paint will give me an accurate count so i don’t over purchase.

While I was down by the school house I realized I needed to get the irrigation water back into the ditch. It had been flood irrigating the lower bottom but I need to get in there and cut for hay. To do this without sinking the tractor I need the bottoms to dry out some. So I dug out the ditch and got all the water flowing down the ditch again. I should be able to cut hay by the end of the week. Since I managed to forget my hat in California I had to be super careful of the sun. I ended up with a lobster skull for several days and didn’t want to make it worse. So I had lots of protective gear. If I wear all this getup I can spend all day out in the 100F beating down sun and not get burned.

“Star” our white tailed cow, had her baby on Sunday. I know this as the baby was still wet and sitting up when I went by her and mom on the tractor. They looked good. Most likely Star will hide the baby for the next couple of weeks and we won’t spot it. If we don’t see it in another week I will go down and look for it. At that point I will just be trying to confirm it died. Hopefully she is just hiding it from prying eyes.

The cows are no different than the sheep, one adult female becomes the babysitter and is responsible for corralling and entertaining all of the babies. I have yet to figure out how they choose whose turn it is today or this week to watch the babies but it is better to avoid this appointment. There are enough babies now that that appointee has to actually work.

The holiday afforded me the time to get all of my outside mowing completed. I will be haying by the end of the week.

It’s so confusing

Ann Marie HardinLeave a comment

Being born must be really confusing. This morning, I was all dressed for work and headed down the driveway. I habitually look over the animals on my way out, and this morning I found something that made me stomp on the brakes. We had a new lamb in the orchard. We were kind of expecting this, since at least one of the little ewes we had put into isolation with the ram turned out to be old enough for him to be interested. But, we were about a week off in our timing. This normally wouldn’t be too much of a problem, but the lamb was not snuggling up next to momma. No, the lamb was attempting to snuggle up next the the (male) alpaca.

Momma kept calling and trying to get the lamb to come to her, but the alpaca was unhelpfully friendly and attentive. I called Steve and told him he needed to come home and help me isolate the pair. Then I backed the car up so I could go change out of town clothes and into work clothes.

Now the sheep are in the orchard with the two trouble-maker alpaca, and all our gates, panels, and sheep isolation paraphernalia is in the barn. So out to the barn I go. On the way out, I devise a plan that involves the two brown gates we had purchased this winter placed in a corner of the orchard to make a pen. We would have to arrange for water, but the ewe would have plenty of feed, and we could choose a corner with a tree for shelter.

Once I got into the bar, it became clear that my plan has a flaw. Unbeknownst to me, Steve had used one of the brown gates in the new fence, so only one of those was available. I wrestled that one out of Steve’s storage place under the stairs, and packed it over to the orchard anyway. I figured Steve would be home soon, and he’d want to “discuss” my plan anyway, so we could figure out how to improvise the missing gate.

As I was wrestling the gate into the orchard, I realize I was quiet. I noticed the alpaca had moved off away from the sheep, and the little black ewe appeared to be laying down. I went out to the road so as not to disturb anyone, and walked down to Mom’s so I could get a better look. Sure enough. I found the ewe laying down, and could just make out the lamb’s head on the far side of her. Apparently the alpaca had lost interest, and momma was able to convince baby that she/he was a sheep. Steve arrived just in time for me to tell him that all was well.

Little things

Steve HardinLeave a comment

I took the time this week to do a couple of little projects before we left for the weekend. There was an old 4×4 post that used to be bolted to a post that had old ceramic insulators installed at the top. The barn and old lamb shed used to have knob and tube power. I pulled the old copper wire out of the spring a few years ago. I had taken down the post as it had rotted away and saved this 4×4. I was going to mount a bat house to it at one point but while cleaning out the machine shed I found an old decorative windmill. I washed it all down with some water and applied some fresh grease. I had the metal sleeve also so I was able to drill a hole in the end of the wood, which turned out to be a solid piece of cedar!!! This would explain why it did so well laying on the ground for the last four years. I greased up the metal sleeve and after installing the windmill it just sat there and didn’t move. A couple of hours later the wind picked up enough to break everything loose and the windmill started to spin and it pivoted on its wood post. I was able to use some of the old lag bolts I picked up all over the farm. I found a railroad tie that was level and had not been pulled over during fence construction. I love it. Once Annmarie spotted it moving around she was surprised at how well it fit. Another fine example of a repurposed item. I finished it just before a rainstorm hit.

Wednesday I killed a couple of hours prepping for more fence. We are having so much trouble keeping the animals in when we cross the stream that I have started to look at ways to just avoid the crossings. We have a five acre spot on the hillside that has not been fenced off yet. Last year we redid the upper fence and started trying to drive posts down the hillside. The hillside is pretty much solid rock so it was not easy. I am hoping that we can get another 6 T posts on the hill. I took the tractor and using the box blade cleared a place for the rest of the downhill side. We will need about 12 more railroad ties to get this fence completed. We have more than enough T posts after picking up another 200 from the scrap yard. The scrap yard has 4 huge rolls of woven wire set aside for me so. I will be picking those up this week. It is enough wire to complete this new fence. This addition will help us with the sheep. They will be able to use the water from the barn lot.

Prior to us leaving this weekend we moved all the sheep into the orchard. There are 100+ sheep in the barn lot now. You cannot really tell that looking at the picture below. This way Tex doesn’t have to put them in and out of the barn lot while we are gone. He is watching and feeding the animals while we are gone.

The best part is he is also cleaning up the spring area and working on the short section of new fencing we started three weeks ago. It should almost be done by the time we get home. It’s the best way to fence.

It needs to be easier

Steve HardinLeave a comment

Saturday was supposed to be sunny and dry but I opted to do some inside work. I am getting tired of getting up in the middle of the night and having to walk down the stairs to get to the bathroom. The second toilet is gaining traction and prioritization. I was talking to Tex as we were getting started in again and I realized that I forgot to order enough floor tile to go up the walls 4 inches. So now I need to call and order another two cases of tile. I will just cut the 8 inch tiles in half with the wet saw.

I had Tex cutting wood while I installed it. This meant he had to recut some pieces because of me measuring wrong or him cutting wrong. By lunch time he was rubbing his right eye nonstop. He had gotten sawdust in it earlier but I noticed it after he started to wear the eye protection I had out in the old house. I keep gloves, dust masks, goggles, eye glasses and ear plugs out in the old house.

Annmarie wanted him to go to the ER but Tex reminded her that his mother was on duty and he was not going to do that. So I had to call his mother then torture Tex by turning his eyelid inside out and wiping it for dust and splinters. I did not find anything. I also irrigated it and still didn’t see anything. I was less than gentle but did get the job done. He ended up going to see his mom and she sent him to the walk in clinic, he had a scratch on his cornea, got some antibiotics and it will heal. I suspect he will be more cognizant of safety gear. If not, Annmarie told me I have to start making him use it!

The goal is to get insulation all around the heat pipes and the exhaust pipes to trap the heat and cut down on the noise. I went out to finish cutting up the plywood but the saw battery died. By the time I got all the tools and wood cleaned up and put away it was time to get cleaned up for a wedding. I had to give Gizmo a shower as he had gotten out of the yard again and his beard was covered with fresh sheep shit. Zeke has not gotten out since we cleaned up the yard but the little dog is still climbing the fence.

We are going to sort the sheep when we get back from Annmarie’s seminary graduation next week. We are going to pull all the lambs off of their mothers and put them in the orchard. We will swap them with the ram and number one ewe. She is no longer limping and he can go hang out with the ewes as they should all be pregnant. We will give the lambs about 4-6 weeks on the orchard then sell them as a group. We have five more sold for slaughter this fall. I still have one cow to sell for slaughter this fall.

Annmarie looked great for the wedding, the hat is an old Pendleton Wool hat she picked up at an estate sale. She says it looks better on her which I cannot deny.

It rained over half an inch at the end of the week and we are under a flood warning for the next two days. This is definitely putting a crimp on my spraying and haying progress. As soon as my neighbors start cutting hay I will!

Hay equipment is here!

Steve HardinLeave a comment

Well, the much needed hay equipment is here. It arrived on Friday. I had Tex come out and start cleaning up fencing scraps and wood scraps. We have them strung all over the farm from doing all the fencing, since a scrap guy is coming I want to try and get all of it cleaned up, sent away or burnt. The new burn pile is already starting to grow. They tried to deliver the equipment on Wednesday but I was not available for a 4 hour window and told the clerk on the phone that they came at the end of the four hour window last time and if they would do it this time I could do Wednesday. She said no, I had to be there the entire four hours. We pushed out the delivery day to Friday as I knew Tex or myself would be available. I had to go into work that morning and was hoping to be done by 1100. They called me at 1040 to say that they were ready to deliver and in Pilot Rock! I called Tex and went home ASAP. There was three pieces of equipment delivered, the mower, the power rake and the baler.

There were some issues, the company over sold the mower I wanted so I have a loaner mower, it’s a little smaller and does not condition the grass. It’s cheaper should I decide to keep it. The round baler is smaller and only bales about 90 bales an hour vs 120 on the one we want. The one we want still has to come over on a container by ship from Italy. All of this stuff is made in Italy. We had to keep all the shipping material so that the baler and mower can be shipped back to the company when they send us our mower and baler.

I had visions of just backing up to the equipment with our quick hitch system and hooking up to everything and just putting it in the machine shed. This did not happen, as not a single piece was capable of using the quick connect. I kept trying, finally Tex told me I had to take the quick connect off the tractor and hook directly to the three point hitch.

You can see that it almost wants to do it, it just needs a couple more inches. I took pictures and sent them to the company asking for a fix. What good is a quick connect when you cannot use it? Prior to this round of equipment I had four pieces for the tractor and three of them can use the quick connect. This makes switching out a couple of minutes and that includes parking it in the correct storage spot. Now that we have four more pieces of equipment the quick connect can only work on 3/8 pieces. This is not acceptable. I ordered 8 adjustable pins that I can bolt on myself. They are about 2 inches longer so I will gain 4 inches total. Looking at the pictures I think that four inches is going to be plenty. I also ordered a box of various locking pins to hold the equipment on. The cleaned out machine shed is amazing!! There is still quit a bit of dust but I am hoping that when I get the plywood up on the hay side I can start to contain the dust. I may drag a hose out and wet down the gravel, maybe even spray down the entire inside of the machine shed to give it that once a centennial cleaning.

The old floor scale that Annmarie’s dad got from PGG has all the parts, I really want to install it and put all the pieces together. I will need a level poured concrete pad about 4×6 feet first. Next year I may do it. It shouldn’t be too bad, I can use sacrete and I have the mixer. I can just use a piece of cow panel as the rebar.

Zeke got out of the yard twice this week so Tex and I removed all the old scrap wood and fencing that was leaning up in the corner of the yard. So now there is no ramp for him to use as a launching platform over the fence. I also went and dug down the piles of dirt I had placed near the side fence.. He had a 18 inch launching platform to go over the fence. Since doing that on Friday, he has not been able to get out of the yard a single time. Who knows if it is a lack of opportunity or just an unwillingness to leave. Time will tell.