It is getting cold, yesterday I thought it was cutting and was chilly until the sun came out. Today, I had to come back into the house after feeding the cows and get a neck warmer. It was the only way to keep the wind from blowing down my neck and shirt. I was still very cold and spent 30 minutes in the shower after I got done warming myself up. I need to break out the Overalls if I am going to sit on the tractor for hours at a time in this weather. I still have about 1/2 acre in field four to plant and to put away all the yard tools and roll up all the water hoses. All the garden and drip lines have been disconnected and blown out so they are ready for winter.
I have been trying to get the last of the grass seeding done. Unfortunately, this is a longer process than I had envisioned. I can do about 3 acres a day, that is it. This is not exactly a rapid process. The other part is that I was working on our seven acre plot and it has a lot of rocks. A lot less rocks after Mr Rainman picked them but the cultivator kept bringing rocks up out of the ground. This meant after I make the trip around again I had to disengage the PTO, jump off, pickup rocks and toss them into the bucket and then engage PTO and go again. I ended up picking four buckets worth of rock over the three days. I did not see a single deer in three days. What I saw a lot of were quail! We have an amazing amount of quail on the farm. We are hoping to thin out the pigeons and maybe some doves as we have about 100 of those also. They are competing with the quail for food. We may have to put out some bird feed blocks this winter for the quail.
Mr Rainman came out this morning to help, upon arrival he announced he did not feel well. So we moved two pieces of furniture out of the house and then went to the barn to tag and band lambs. The oldest lambs were 6 weeks old and pretty dang big for that age. Annmarie had been telling me for a while to get them banded but I was holding out for more lambs. At the rate they are having babies its going to take four months again. It is a dang good thing we got another ram, our old one may be nice but he is slow. So we pushed the sheep and lambs into the barn, watched the sheep so we knew who belonged to whomever. I had a new occurrence that has not happened in the last 287 boy lambs we have had, one of the lambs had TWO SCROTUM, strange but solved by putting one testicle in each one and banding them both. We will be watching our old ram, he may have to be taken out of the equation permanently. Mr Rainman helped me unload the end table at my mothers and then proceeded to go home and sleep all day, I suspect the dreaded mancold. It is a downer.
I put all the tools I needed, seed and fuel into the Kubota and drove up to the little John Deere tractor. I could not get it to start. We had this problem last week, the neutral indicator is not working correctly therefore the engine doesn’t start. I filled the tractor with fuel, most of it went on me, and my long sleeve shirt then tried to start it for over ten minutes with no luck. I then used the Kubota to pull off the broken cultivator/seeder and got it onto the Kubota. I also repaired the cultivator/seeder. This took an hour and then I was finally ready to seed. I spent the rest of the day seeding. I have all of field #2 completed. I have half of field #3 planted. So in total I have about 7 acres planted so far. I have 10 more acres to plant, but am going to run out of seed. Hopefully, my seed order comes in tomorrow. Planting is a whole lot of circles and circles and more circles.
I need to get new diesel cans so I can quit wearing fuel and pouring it all over the tractor. I tried to replace the nozzle but the new one does not work very well and it still leaks. I did discover today that the PTO safety is still engaged on the new tractor. I jumped off to look at the grain bin and the tractor died because the PTO was engaged. I have it overridden on my old little tractor and totally forgot about it. I am hoping to have everything planted by this upcoming weekend.
It was time I use that fancy welder I purchased last year to actually make something. It has been almost two years since I took the welding class so I had to practice and get up to speed on a few things. I love my new welding hood, I especially love the grinding setting on the glass so it doesn’t darken when you are using the grinder. The only real problem with this is you have to remember to turn it to weld before you set that first arc or it is very bright! I only did that once this time. I had to replace the upright square tubing for the seeder aperture controller. A couple of years ago I kinked it by lifting it into the back of the tractor. It vibrated in half yesterday and needed to be repaired ASAP as I was getting ready to plant all weekend. I went to the local scrap/fabrication yard and picked up 2’ of 1.25” square thick walled tubing for $10. While I was there I scored some more large bale hay! A true miracle in this year of low hay yields. I will be picking up the hay as soon as I get the grass seed planted. I went home, ground the old part apart, prepped the tubing and got the welder to work! I was able to weld it, I still need more practice, I burned through the pipe on one side and then had to go back and fill it in. I only had rust paint available, I tried black first but the nozzle was plugged.
Mr Rainman has been coming out for the last three days and prepping fields. I had visions of spending this weekend planting and I think it is going to happen. I was able to plant about 1.5 acres of Triticale today and one acre of grass. I have been planting the difficult areas first. It took me most of the day to get the cultivator dialed in and working the way I want it to. I should have the aperture opening adjusted for grass by tomorrow. Once I have that in place then Mr Rainman can plant all day Monday and Tuesday. I will have to pick it up again on Wednesday. My seed order from PGG did not come in yet, I had some leftover (double recommended #) and I purchased some more locally. I want to use the PGG grass on the large 7 acre field out by the road. The weather channel says it is going to freeze this week. The planted fields done with the cultivator look good.
The sheep are just not with the plan. We should be having lambs dropping out everywhere and we have had one set of twins just born in the last two weeks. Mr Rainman and I will tag and band them all in the morning. They are just eating hay and doing nothing most of the time.
Our local wheat fields were planted last weekend with Club wheat. The Club variety seems to do well in our soil and it is fetching a very nice price.
The plumbing hole down at the mother in law’s house is covered. I just need to go down and finish cleaning up around the area.
The Kubota tractor got its first oil change today, it already has 140 hours on it! Mr Rainman worked on smoothing out the fields and removing organic matter while I used the green tractor to plant grass seeds. I managed to break off a bolt that I had tightened yesterday and then I proceeded to break the angle adjuster on the seed hopper. I stripped the threads, I took it off to try and get it back together and realized that I could have moved it an inch forward by changing bolt hole, I didn’t know I could do that. When the new one comes I will hook it up correctly for the type of use it sees on the farm.
The front porch still needs those last boards installed, I just picked up the column trim this week and the gates need to be hung to keep all four legged critters off of our deck. The quail are all over the farm. Saying there are over 200 is no exaggeration. I am hoping the winter is perfect and the quail all make it through. We could have a real bunch of them by next year.
I have been busy, we just got done with the Pendleton RoundUp and I don’t get any stuff done on the farm for about ten days around that event, my paying job requires a lot of attention during that week. The nice thing was we got some rain on the last weekend. We had 0.56” over two days and have had a total of 0.91” of rain in the month of September. This is excellent news for us but it did take a few days before it was possible to get back out in the fields. My helpers have been out hunting so I have been on my own. I spent two days getting field #1 ready, Mr Rainman had picked so many rocks I only ended up picking four bucket loads over two days. There is probably a couple more bucket loads that are obvious but the huge rocks are all gone and even the medium sized ones are gone. I don’t think I will break a sickle bar mower tooth on any of the rocks left. I have some organic matter on the edges of the field that needs to be piled up out of the field and it will be ready to plant. The field still has too many weeds for us to plant alfalfa in it yet. I am unable to get fall barley or fall oats locally. Most of the fields are too muddy to plant in the spring. So my only choices are grass or triticale. Triticale has a pretty narrow window to harvest in and that is problematic for me as my other job takes up time. PGG did not have grass seed in stock so it had to be delivered. I will be checking in on Monday and get more ordered. Annmarie wants us to plant grass seed in the upper field. This will allow me to still spray with 2-4-D and get a handle on the thistle weeds.
The chickens have learned to let us know when they are out of food. They will come running whenever they see you and become shadows. They won’t leave until you feed them. Once fed they all crowd in and try to get to the same feeder even though there are other choices. Our lone rabbit out front is still alive and kicking, we see it almost every day now. The quail are every where and are amazing. I am sure they are my favorite gamebird. The one we have not seen a lot of are pheasants. We had a lot last year and I am not seeing as many this year. The pidgens are multiplying and starting to get over the magical 30 total number. Once they stay at 30 for a year, they multiply at an exponential rate the next year. There are a bunch of dens/holes in the upper fields from coyotes but I have not seen any coyotes this year.
The pregnant sheep have spent the weekend on the front yard and hillside knocking down the weeds and grass. The dogs are out on the run so they are protecting my hens and chicks plants and the trumpet vine from a sheep induced thinning. There is enough green grass that I think I will have to let the sheep in 3 of 7 days. Some of those ewes are so pregnant they can hardly walk. We expected the herd to be done lambing by now not just three ewes and no one in the last three weeks. Thank goodness we went and bought a replacement ram!
Well it’s midweek and I was able to get some work done at home. I had to juggle some things around as I will be covering shifts at work the rest of the week due to shortages and Covid. Mr Rainman has been working on getting field #1 ready to plant. He was able to disc yesterday and pick up rocks in the fairly nice part of the field. Today he spent four solid hours picking rocks only in about 1.5 acres and applying them to the new water berm I am building up there. I am trying to get the old berm back into shape and then build a secondary berm to stop any overflow or breakthroughs from flooding the entire field. It will take me about another two years to get it all done. I want it in place so when I plant alfalfa I won’t have to worry about the field getting flooded and ruined. He was able to get the entire field picked of rocks and all disced. I just need to go up there with the harrow and it will be ready to plant.
First thing this morning we took a couple of hours to clean off the old house porch. It was covered in tools from all our summer projects and the deck. We managed to get it all sorted, put away in old house or taken out to the machine shed. We even swept off the porch and took out the trash! I proceeded to swap out the rusted painted screws in the tin around our pillars. I had to scrub the rust away then install the new painted screws. I also cleaned up some of the old caulk around the pillars. I did caulk the bottom of the pillars but have ordered a plastic molding to go around the bottom of the large pillars so they match the 4×4 covers. I was informed tonight that I need to order some 1/4 round for the top of the pillars. I was just going to put white caulk at the top. I am told that won’t look as good, the plastic trim is a special order item so I will have to get that ordered.
After lunch I took 40 minutes and stripped the hair from our Brussels Griffin. He is a terrier and you have to pull their hair out instead of shaving them. He is used to it and just sits in my lap. He doesn’t really like it around his nose or lower legs. He is now super soft and cuddly. Annmarie got the John Deere tractor tire repaired again. They installed the tire on backwards last time so we had to get them to turn it around. We installed the tire and hooked up the planter/seeder to the little tractor. I ended up having to replace one tooth on the cultivator that was broken. It had two different hay strings wrapped around it and some metal bailing wire and a piece of barbed wire! Those all got removed and the equipment adjusted so it merely needs seed in the hopper and its ready to plant! We are supposed to get 1/2” of rain on this upcoming Friday & Saturday. I will be working so no time will be lost due to the weather. I found a hydraulic leak on the new tractor but do not have a metric wrench that big, so I will need to buy some more tools, dang. The sheep have still not had any more babies.
Stewart Creek Somethings 