#stewartcreeksomethings

Haying is progressing with a little help from my friends

Steve HardinLeave a comment

The big obstacle after breaking my foot was going to be getting the rest of the hay baled and then put up in the barn. The day after I broke my foot the baler broke, it is skipping a drive chain due to all the wear on the gears, the gears need replaced, adjusting the chain length and tension is no longer working. That same afternoon the John Deere tractor blew out seal and quit moving due to a malfunction in the front right steering mechanism. Turns out this is a common issue and a design defect that eventually rears its ugly head. The tractor is over ten years old and has been used hard, It has over 2000 hours on it. Due to it not being able to move they had to come out and pull off the assembly. This took about a week to fix but the cost went from $2000 to $4100. This is a lot cheaper than a new tractor but not pleasant. Especially, when you consider I had to order parts for the baler.

The baler is an Abbriata, made in Italy and really only one dealer carries parts in the United States. When I called to order parts the first time I learned that the company no longer sells this brand small round baler. Abbriata was sold recently and the prices jumped almost 50%. So my $13k baler is now $20k. This made it easy to order replacement parts. I got roller gears and chain ordered then the next day remembered that we forgot to order the small gears. I called back and got the same service representative and those got ordered, I now have $2k worth of spare parts coming for the baler. On the plus side, I will be able to sit in a chair and help direct the baler repair. I am getting used to working on it even if I don’t like it.

The Go Getter, Mr Rainman and the former Gimp, now called the Mermaid volunteered to help me bring in bales. (The Gimp made an argument for a name change. Normally, I don’t do name changes for the blog but she was compelling and she stated that a Gimp could not pickup hay and that currently I was the Gimp. It made sense in a convoluted way and she was correct as I was wearing the walking boot not her.) This made me the designated driver but since we were starting first thing in the morning and I could only use one foot to operate the gas and brake simultaneously the first trip was a little jerky jerky and I killed it about ten times before the engine warmed up and I did not have to keep my foot on the gas 100% of the time. We managed to pickup four loads (by we, I mean that the puppy, Milo, and I watched while everyone else did the hard work). It was a Friday so he had to come with me so the siding guy could use the boom without fear of driving over the puppy.

Luckily, the Gingerman offered to come down the next weekend and rake and bale the hay we had down. It took a solid day but he was able to bale around 150 square bales equivalent to 6 tons of grass hay.

Mr Rainman, the Go Getter and Mr Second Career came over during the week and picked up more bales in an attempt to get them out of the fields. Mr Second Career had borrowed the Kubota to mow down weeds and volunteered to help pickup hay. The Go Getter just feels sorry for me and volunteered to bale me out. They got most of the hay into the barn or lamb shed. The square bales are a lot heavier so they went into the lamb shed as they are easier to load and don’t get stacked as high.

The Gingerman tells me there are about 70 round bales in field one still to pickup. He thinks he can do it on Monday. Once that is done we will only have the orchard to mow and rake. I think we will just pick it up loose and feed the alpaca. The last bit down by the school house is about 25-35 bales only. But we have to have the round baler working and the small sickle bar mower working. Both spaces are very small and tight and need the small equipment to be able to fit. This won’t happen until after Fourth of July. I am unable to help with this issue.

Sidelined the hard way

Steve Hardin1 Comment

Fridays the puppy and I hang out, do some housework and then eventually go out and do some other things. The siding is still being installed so the puppy cannot be running around the yard with the overhead lift being used. So we worked on installing two more eye hooks on the green bean bin so we can tie up the bean pole evenly and keep the wind from bending it under the weight of the bean vines. We also had to go out and drill about 25 holes in the asparagus/strawberry bin. It was holding water again. The drain hole at the bottom is working but its slow and it cannot keep up. I have holes at all levels now so it should drain out just fine now.

The correct siding came on Thursday, the wrong kind had been delivered, so on Friday the base row needed to be set. It takes this special metal hanger that is installed first then the siding sits on it. The worker was having quite the time finding a way to run a level around the base as in some corners there was a 2” difference over 10’! He spent a lot of time getting it set in the correct spot. The first piece of horizontal siding went up on Friday. I was able to leave the puppy in the yard so I could go work on the sickle bar mower. It looks like they just need to get the horizontal siding on and then caulked and they will be done with the siding job.

There is a piece at the outer edge that pushes the outside edge back into the middle. It got bent so I wanted to take it off, beat on it with a hammer and decide if it needed anything else. I was working on it with the sickle bar in the upright position and it was slow going. I opted to lower the sickle bar to make it easier to work on. I undid the bar holding it upright then just dropped the bar. There is this chain mechanism that usually catches it. Upon later reflection that chain only engages when the three point hitch is elevated which it was not. I dropped that bar directly on top of my right foot. To say that I may have said a few choice words after a solid howl is an understatement. As soon as I could catch my breath I went on a verbal rampage against the sickle bar. It took about 15 minutes before I could move or feel my toes. Once I could move my toes I was pretty sure I had broken my foot, the pain and swelling were getting localized.

I had called Annmarie, she was still at work, to come get me. I considered driving but it was my right foot and I could not walk. My car is a standard and I was certain I could not drive with my right foot. I made such a raucous that the siding guy hollered out and asked if I needed any help. I yelled back that I had just broken my foot but was fine. He went back to siding. I ended up in the ER, I broke a metatarsal in my right foot. I am on crutches, wearing a boot and am 100% non-weight bearing for the next eight weeks! This totally sucks! Luckily, Mr Rainman is chugging away at the hay. He has another 300 bales done and two more fields cut. There is hope that he can be done with haying by the end of the week. Once the haying is done then the gazebo is the next project. I have a new throttle cable coming for the compactor and once that is installed we can prep the pad for the gazebo.

This is really going to slow down my summer. The hardest part of the whole thing is just sitting around. I hate it already and its only been two days!

Farm 3/ Predators 2

Steve HardinLeave a comment

There tends to be an optimism that persists whenever you are talking about predator control. Maybe it’s hope, maybe it’s bragging rights but whatever it is it does happen. I have had to decrease the farm score this year as last night a raccoon killed two chickens. It was most likely the same raccoon I saw at 0200 when I took the puppy outside to potty. I was of course in a robe and slippers without any glasses on. No way it was a cat as it jumped out of the large wild rose bush and proceeded to run down the creek and under the fence and then down the creek. It was very noisy. I was ignoring it until Mr Rainman sent me pictures of two dead chickens today with a third one injured. If the stupid chickens would go inside the coop this would not happen.

So now I am going to have to go out, check on the chickens and then just stand around looking for frogs to see who can out wait whom. A classic game of prey vs predator.

Since the farm is ahead of the predators I decided I had better be proactive tonight and make sure all of the chickens went into the coop before the automatic chicken door closed. All of the chickens were inside and the only animal I spotted was the grey barn kitty down by the creek. I was standing by the coop looking into the back creek with my spotlight trying to find the noisy frog that I know was right in front of me when a damn raccoon jumped out of the bush next to the chicken coop. It was running over the overhead soon to be roof supports. I had my trusty suppressed 22 pistol and started flinging lead into the sky. I for sure hit it at least once if not twice. By the time I got around the coop and into the ram pasture it was running toward the barn. I am a firm believer in more lead matters, so I continued to fling it. I managed to get off nine rounds and had to search the barn. I was unable to find the raccoon in the barn. Annmarie thinks it is living over the tack room during the day.

Mr Rainman came out today and repaired the sickle mower for the Kubota tractor. Later he went out and finished cutting field one. I think there is about three acres left to process in that field. I really need to focus on repairing the u joints on the John Deere tractor tomorrow. I had to dig out some grass on the driveline on Sunday and the U joints are bad! I have all the parts to repair it but have not taken the time to actually do it.

We had to take a break today to unload the antiques we won at an auction. One of the local antique stores in Pendleton was having multiple clearance online auctions and today was pickup day. I had to make two trips with the pickup to get everything. Now I will need to wash and polish everything up. We are going to rearrange our living room and Annmarie’s office to fit the new furniture. We are actually going to get rid of three items and replace them with three new ones! I scrubbed the bronze book ends and small brass sculpture tonight. Plus, I managed to score some more old marbles!

Haying by moonlight

Steve HardinLeave a comment

Mr Rainman came out this week on Tuesday and turned the cut grass from field one so I could have the pleasure of baling it all. I had a neighbor call me and ask about cutting their field. I ended up just going over and cutting it and then raked it after work and then baled it after work. It is beautiful grass hay. I was able to get about 1.6 tons off of their 3 acres. I had to work fast to get it all done before the sun went down as the external lights on my John Deere are dead. It also gets cold once the sun goes down. I was at the neighbors finishing up and it started to get cold and I realized my vest was no longer on the back of my seat. I happened to look over and spotted by vest inside a bale of hay! I had to cut the bale open and unroll it to get my vest out. Surprisingly, the jacket was just dirtier than normal, it did not have any tears in it.

I then ended up staying up till midnight on Wednesday, Thursday and Friday night trying to get all of the hay baled from field one that we had cut. I was supposed to only cut half the field but I think I cut about 70% of the field instead!

On Friday I had puppy duty so we went to town early to get dog food and chicken food then he had to stay on the breeze porch for three hours while I baled hay. I came back around 1400 and we went to town for tractor parts. I knew I needed to drive the pickup in the am but could not remember why so I took the car, I remembered when I got to town that I needed to pickup tractor parts. The puppy thought he was dying by having to spend three hours on the porch. He cannot run around outside because the man lift is in use and there is no way you could not run over him if he was outside. He has no fear of the equipment.

At 1600 I went back out and baled. The baler was causing me problems and not rolling bales well. I opened up the side and realized the main gear chain was loose and I could no longer adjust the tightness any more, my adjuster was adjusted to the maximum. I drove back to the house as it was getting dark and worked on shortening the chain. Mr Gingerman came out to help me and the progeny held the light. I still have not gotten the machine shed lights wired up yet. I am closer but I need to get it finished. We ended up taking out three links. Should have done 4-5. While we were fixing the chain, of course it had to be totally removed, it was discovered that I had better order a full set of gears as the teeth on some are pretty worn. That is going to be expensive. I have two gears already I believe, so I will need to generate a parts list first before calling for replacements. If they have to come from Italy it will take 30-45 days unless I air mail them and I don’t need them that bad.

Gingerman worked on the 1957 brakes and got them working well enough to safely drive the beast to a shop and have the brakes fully worked over. So I will be adding that to the list next week. He did say there is a radiator leak also. Who would have guessed after sitting idle for 25+ years? So that will need to be added to the list. I have still not figured out how to install new side window felt to keep the windows from rattling around and braking. You Tube is not helping me there. I need to get those repaired before I can start using the truck, I am afraid I will just beat/brake the windows from driving around on the rough ground unless it is repaired.

I went back out to bale some more and it worked much better but the grass is getting too dry, 8% moisture and its just so slick that it does not want to roll up well. I need to put a few more gripper strips on the rollers to get it to form better bales. At midnight I just gave up, there was about another three hours of baling left, if everything worked normal which it was not. I was dumping more bales than I could get formed and wrapped. Besides after three nights working 19-20 hour days I was was wearing down.

French drain completed

Steve HardinLeave a comment

Memorial Day I could not do any haying. So I decided to just grit my teeth and finish digging the French drain for the machine shed hay storage area. I only needed to dig the sump area but that took a while as the tractor could not reach down very far. I tried to put the clamp on forks on the John Deere bucket but that did not work very well. I think if the ground had been easier to dig in then it would have worked great but it’s not. I finished lining everything with gravel, laid down the drain pipe and buried the entire thing in gravel. I then went ahead and filled the bottom of the space with a couple of inches of gravel. After a week of being in place the space feels drier when you walk to the back corner. It smells less like moisture and the humidity is even lower. It’s pretty amazing. I

t was early afternoon so I then leveled the dirt mound for the gazebo and laid in about one inch of gravel over it. I tried to break out the compactor but the throttle cable needs to be redone. It’s torn and won’t keep the throttle wide open. It’s an easy fix, I just need to get the part ordered. As soon as we finish haying its back to fencing and getting the gazebo area prepped. The holes for the gazebo supports need to be dug before the ground turns into concrete.

The sheep almost killed the chives that I planted in the big ceramic planters next to the front steps. They really like chives! They ate them down to the dirt level and then even tried to nibble down further into the roots. I have been thinking about making a screen that goes around the planters to hold the chives in place when they get big they drop down and hang everywhere. I had taken a couple of measurements and decided that the easiest way was to paint a circle on the welding table and just free hand it from there. I am still using stick welding. I have a wire feed but have not tried using it. I was under the impression that the wire fed items needed to be clean and ready for a weld. The stick just burns through all that crap. I need the practice anyways. So I started working on it. I had to grind out all of the nails so there were no sharp edges to the design. It was fairly warm outside so I decided to weld in a short sleeve shirt. This is not something I have done before. I remembered why when I went to take a shower. I had a major flash burn to my forearms and lower biceps. It looked like I had been standing in the hot sun all day. It did not feel good in the hot shower. Eventually, I will get back to the project and finish it.