fruit trees

Getting caught up

Steve HardinLeave a comment

I spent most of the day just puttering around doing little things. Sometimes it seems like I don’t do much on those days but it all needs to be done eventually. I watered our three new fruit trees, two apricots and a peach tree. They are still in buckets and I will get them in the ground next week. They are all blooming so I will have to pick off the fruit as soon as it shows up. I don’t want them to produce fruit this first year, I want them to grow and spread their roots.

We had already moved our chive plant up to the front porch entrance pots. I split it in half so we could have some in each pot. So today I split our edible creeping thyme into two bunches and put it around the base of the chives. We would like the thyme to grow over the side of the pots. The thyme was in an old half wine barrel in the back garden area. When we moved the barrel the entire back is rotted out so it needs to go away. We will use the soil in the other garden planters then I can burn the rotten barrel. Both planters got a good soaking with water to start them on their way.

I dug thistles on the front hillside. Since we are trying to establish clover we cannot use any type of herbicide on the hillside. So all thistles are dug with a shovel. This took quite a while to get done. As soon as I finished that I went and cut ends for our tomato enclosures. Annmarie wanted panels on the end to keep the cats out so she could plant basil plants between the tomato plants. I almost found enough clips to hold them in place correctly. I need four more small clips. Now that I think about it there may be four out in the old house. I will have to check sometime.

I have been slowly working on the Bell! I run the wire brush over it to clean up the rust then hit it with some Rustoleum spray paint. I have been doing this for over a year. Today I decided to just hit it and make some solid progress. Mr Rainman and I had lifted the bell off its stand a couple of weeks ago so I had a lot better access to the bell. I got both uprights sanded and painted. I ran out of dark blue spray paint so now it is a bright blue. I went over to the old house and found eight more cans of spray paint so I figured the bell was getting whatever color I had on hand. I was able to break loose the bolts holding the ringer gear onto the bell. I cleaned the bolts up and ran the threads over their entire length to make sure I could tighten them on the reassembly. I then worked on the ringer gear and got it all cleaned up. I am not going to paint the bolts until I get them on the bell. I think another two hours and I will have the entire bell body cleaned up and painted. Once that is done I will need to make a new wooden base for the bell. Then I need to buy four 2x8x20’ boards and I can mount the bell in the upper portion of the hay side of the machine shed. This will keep it totally out of the weather.

Since the Gingerman got the Little Dumper running yesterday I figured I had better do my part. I went over to look at the door rubber seals. I ended up having to grind down some rusted screws holding a metal plate to the bottom of the door. It was just one solid horizontal piece of rust. I was able to grind the tops off and pry the metal piece off. I then had to grind down the screws until they were flush and smooth before installing the new rubber seal. I managed to get the seal on and only had to cut about one inch out of the bottom middle and use seal glue to put the gasket back together. I tried to take the screws out of the door so I can gain access to the window but there was one screw I could not budge. I will need to spray some penetrating oil on it and hope I can budge it next week.

I have all of the door seals and the front and back window seals. The front window seal needs to replaced ASAP. It is torn and has multiple holes in it. The rear window seal looks great but since I have a new one I might as well replace the old. I did try and latch the passenger door but it would not seal tightly. One more thing to adjust and repair on the old truck. I suspect the rotating mechanism is not rotating! I know, it took a pure genius to figure that out. When I get the panel off to get at the window I will be able to get at the door lock/handle mechanism at the same time.

Predators 11/ Farm 1

Steve HardinLeave a comment

Sunday morning we went out to do more fencing. The Apprentice just keeps coming back for more, which is a good thing. On the way out to field #1 we passed two dead lambs! Both kills occurred in field #4 near the barn lot, one near the old well and one near the dry creek bed. The one near the well was about 2/3 eaten and the other one was barely touched. After some righteous anger outbursts, now there are only 50 lambs to sell, we continued on to field #1 to fence. I did text the person who was supposed to come buy lambs on Monday. They eventually texted back and had some issues of their own and will not be able to come get lambs until Saturday. So we need to keep all 50 alive for one more week.

When we were installing the H braces we used a rolling measuring wheel to mark out 315’ approximately as each roll of woven wire is 330’. The plan was to be able to tighten one roll of wire at a time. A single roll weighs 185# so tying more than one together and trying to get it tight is brutal. It’s hard enough trying to get 185# of wire to stand upright using a hand tightener. I made sure and brought along a four foot section of pipe to use as a cheater bar when the tightener got too hard for me to tighten by hand. This allowed me to get another 6-12 inches of tightening.

On Saturday the black walnut tree was fine (see pictures from previous post) and then this morning the thing had split in half! It looks like there was a natural wishbone and the amount of walnuts caused the tree to just split in half. We are going to let it see if it can live by spending half its time on the ground. Who knows, maybe it will survive and do well. The turkeys roost in the tree also so maybe we should blame them instead of the huge number of walnuts.

We fixed the H brace and then tightened the fence to it. Once that was done then all of the T post clips had to be installed. I showed the Apprentice how to do this but it takes quite a bit of practice to be fast at it. I am doing about 2/3 of the fence. But I have had a lot of practice! We then did the wooden stays. This really makes the fence look good and it keeps the animals from pressing down on the smooth wire. We then rolled out another roll of fencing and got it up! Due to to curved nature of this fence we had to go on the outside of the railroad tie H braces in two spots. We clipped and stayed that section and then rolled out another 330’ of fence and called it a day. We are both getting very tired and sore.

I opted to do coyote patrol that evening and night. We don’t own a spotlight yet (it’s on order 300k candle power). But the moon was supposed to be out and I lined the pickup headlights to cover the area and used a powerful flashlight. I stayed out there from 1800-0000, 6 hours and never saw a single predator. Honestly, this is the most stupid problem ever. I am looking into a thermal scope and a flat shooting rifle. What we really need is a drone with a thermal camera on it that can be auto launched, flown over the farm then allow it to auto land back at it’s starting point. This way I would know whether to go out and deal with the predators. I am also looking into some thermal binoculars. The thermal binoculars and the spotlight with a good scope might just be enough. I have done the math, a protection dog costs about $1600 a year by the time you count for food and vet costs. This is a cost that continues year to year. A rifle and binocular cost is a one time event.

Fencing again

Steve HardinLeave a comment

The weekend was another one of those catch up ones. We ended up doing the things that had been put off but still needed to be done for various reasons. These weekends don’t feel as productive to me but they have to be done.

The Apprentice came out early Saturday and we prepped for fencing. This meant greasing the John Deere. This was a job I thought she might know how to do. The Apprentice assured me she had driven a large tractor before, a huge tractor. Yes, she had driven it but had not ever greased the fittings before. We ended up with grease on some things that were not fittings, but together we managed to get it done. We ended up laying out T posts and wooden stays all round field #1. We ran out of wooden stays! So I ended up splitting some of our own from the old cedar posts I had kept on the farm. I was able to get three stays from every post. I ended up breaking two shingle hammers doing it. I need to use the hand axe instead to get a weightier hit when splitting the post. I think I have enough posts left to split at least another 100 stays. After that I will have to buy some more. I always forget that the prep work for the fence is about half the install time. It takes a lot of time to measure and toss out all of the needed items. Doing this makes the fence go up a lot faster when the actual build begins. We even drove in some T posts by hand. This was not a job that the Apprentice does well. But she killed it when it came time to digging out the barn. Different muscles were used in each action. The post pounding muscles need a lot more work.

We spent most of Sunday out in the orchard. We had to pick the nectarines but they were not quite ripe. There was a huge storm coming into California and was supposed to bring potential flood levels of rain. The branches were already breaking on the nectarine tree so I figured it would be prudent to pick them now before the rain and storm ruined them. We tossed all of the tiny ones and any that had been eaten by earwigs over the fence for the cows and sheep to eat. We tossed out a lot of fruit and still ended up taking about 60# into the house and spreading it all over the dining room table to ripen over the next 1-2 weeks. I filled the entire table and was glad we fed the marginal stuff to the animals.

I even ended up going over to our Italian plum tree and tossing about 20# of fruit from the lower part of the tree over to the animals also. The branches were bending under the weight of all of the fruit. The pastures are getting pretty dry, we are a desert climate so I opened up the orchard for the cows and sheep after the Apprentice and I moved T posts and fencing wrap around all of the trees and raised it up back to it’s original high level. The cows still came in and reached up and ate all of the leaves, fruit and small branches they could reach. This has raised the branch level up significantly on all of the trees. There are still more Italian plums than we can safely eat left on the tree. This does not include the little yellow plums up in field #4 that should be ripe around the same time. The Asian pears are still not ripe yet and the fruit is very small this year. I will probably need to thin them harder next year to get a bigger pear.

The last half of Sunday was spent pounding posts into the ground. We even hooked up the post hole auger and switched out the 12” auger for the 6” auger. It was supposed to rain and I figured if I could get the 6” hole completed then the 12” auger should just follow the hole and tear it up. It just sits on the top of the dirt when it is super dry so following a hole should make it easy. We also put on the Texas T-post driving tool and filled the tractor bucket with gravel and 150# of steel tractor weights. We did manage to get some of the T-posts pounded in with the tractor. We also bent several of the posts in an attempt to use the tractor to pound them in. The heavier T posts make using the tractor doable.

Outside theme continued

Steve HardinLeave a comment

We spent the weekend working outside to get ready for spring. Mr Professional brought out his Progeny and we continued the theme from Friday. We planted all of the trees and I finished trimming all of the trees not done Friday. I picked up all of the branches in the orchard and the Progeny picked up sticks and branches in the orchard pasture, the lavender patch and the front yard. We have now adopted two separate names when talking about the orchard area. We have the “Orchard” which is where the fruit trees are located and then there is the “Orchard Pasture” which is the surrounding pasture. The orchard has its own fence so the animals cannot get to the trees. I took a hard look at the old apple tree after cutting out a bunch of low dead branches. I think if I cut out the dead stuff out of the top of the tree the tree might regrow. The entire upper half of the tree is dead.

We found a bunch of box elder bugs in huge clusters on the sunny side of the larger trees. So I mixed up some bug spray and hosed them down. We also sprayed the machine shed and the mother-in-law’s house. I am hopeful that if we can kill large amounts now we won’t have as bad an infestation. Already we have none around our house and I am only finding about ten bugs inside the house after spraying.

We went over to grandma’s old house and found three Italian plum trees, a black walnut tree and a five gallon bucket full of Iris. We planted the plums in the orchard, two are really tiny and need some growing before we can separate them. I planted the walnut tree out in the ram pasture and we put the Iris out in the watered barn flower area. The chickens got into the area last fall and killed most of the flowers I had in there. The chickens are rough on this area. We installed some more chicken wire to block off the six feet of access they had. Unfortunately all they have to do now is just fly in over the fence. I made a new spot for the Iris and hopefully we can get them established.

On Sunday we drilled a 1/2” hole in my tractor bucket and installed the T-post driver I purchased from Bucke-Tee LLC in Texas! This turned out to be the best $200 I have spent this year. We put 200# of tractor weights in the bucket and then you insert a T post into the driver and then use the bucket to push the post into the ground. Obviously the ground has to be kind of soft. But honestly, if I had 500-600# of weight in the bucket and you add in the hydraulics on the tractor I think the ground could be a little hard. We were able to put 30 T-posts in the ground in under an hour. I think I could do the entire new fence line I want in a single day! I used to only be able to do 30-40 posts by hand. I just got worn out pounding them in. We then installed low wire around all of the new trees.

One of the things that had not happened yet was installing the guide wires for the raspberries and blackberries. So we pounded in 8 poles and strung wire and anchors so the berries can grow on a trellis.

I am able to work outside again after Covid 19. I still cannot do a lot of long distance walking but short muscular activity is way better than aerobic anything. Unfortunately I have done nothing for over 90 days so this manual labor is very hard on my body. I ache all over and flop around like a fish out of water at night. When I hurt this much I have to sleep in the spare room so I don’t keep Annmarie up. I try not to overdo it this much usually but after Covid I need to keep pushing so I can get my strength and stamina back.

Orchard Work

Steve HardinLeave a comment

On Friday I had Mr Professional out, he and I went over to the Metal fabricators and picked up my five heavy duty 12 foot welded gates. The bull will not be able to tear these up at all, no matter how much he tries. We got them all loaded up on the trailer and unloaded into the machine shed. I need to spray paint them before I hang them up. I will be doing that very soon. Annmarie and I had already talked about fruit trees as they had just come into our local feed store last week. I like to plant them about 45 days from now but by the time I am ready to plant the selections left at the store are pretty slim and I don’t get all the kinds I want. So we bit the bullet and just went into town and bought some fruit trees. The plan was to buy six trees, we ended up with eight trees, Mt Royal Plum, Honey Crisp Apple, Tilson Apricot, Royal Gala Apple, Golden Spice Pear, Summercrisp Pear, Rainier Cherry and Black Tartan Cherry. Mr Professional and I went around the orchard and dropped off all the trees where we wanted them to be planted.

We removed the top half of the cages around the old trees and I started to trim all of the fruit trees from the ground. Mr Professional took the tractor and changed out the box blade for the post hole auger. We drilled out 9 holes as Annmarie wanted me to go to her grandmother’s old house and try and salvage a Italian plum tree. Once the holes were drilled we used the tractor as a more efficient ladder so that I could trim the upper branches on the trees. This is far easier than dragging a ladder around. I had not really shaped the trees in the last three years and spent a lot of time choosing branches and thinning the middle out of the trees. I am going to have to start spraying for bugs next year to keep the fruit bug free. The hardest part about this is you have to spray every two weeks during the summer.