lambs

Lambies are here

Steve HardinLeave a comment

The quail have discovered our yard. We like this as we get to see them and the dogs seem to ignore them. The only real problem is our very large living room windows look out onto the yard. The stupid quail think they can fly through the window! I heard a large crash in the living room and ran into it from the kitchen, there were feathers on the window but by the time I got to the window the cat had already managed to pounce on one stunned quail and bit it in the neck killing it. I saved the other one but it had broke its neck and was dead so I didn’t really save its life. We would love to have 50+ quail flying around all over the farm, instead we have about 15 now flying around and we are two more short now.

I snagged this picture of all the pregnant ewes the day before they started popping out babies. They were very interested in eating as much hay as possible and ignoring me. I had just thrown out another bale of straw a few days before this picture.

The lambs are coming fast and furious now! Annmarie is on winter break from her job and is going out to the barn three times a day to deal with all the new babies. We have had one ewe deliver one baby, one triplets and one quadruplet. We have only had to bummer out one lamb and he was from a twin set. The mother is not very good about raising more than one lamb. We need to cull her. The quadruplets seem to now be triplets and the fourth lamb is now with one of our older mothers that only had a single baby. She is now nursing two lambs and everyone is very happy. So we have 16 lambs and 8 ewes feeding them. We still have 30-32 ewes left to give birth. We usually have about a 135% birth rate but we are over 200% now. If we keep that up we will end up with 80 lambs and 40 ewes! That is a lot of sheep. I will be super happy with a 150% birth rate. In a couple more days we will start letting the older babies go outside with their mommas into our limited outside newborn enclosure. This is our set of triplets. All the babies but three are solid chocolate brown. Three of them are spotted white and brown and very cute. One of those is a girl as I checked while getting lamb snuggles today. We may keep her. Her mother is super relaxed and calm which is what we are looking for in a breeder ewe. Annmarie and I went to town tonight and got two 8 foot gates so we could use them in the barn. Annmarie wants to order some twisty hinges from our sheep products supply company and I will be cutting 4×16 foot 3 inch square panels into 4×4 foot sections for her to arrange in any pattern her heart desires. The small panels make it easy to move parts all around the barn. I will need to grind off the sharp edges after I cut them with bolt cutters. We will order the twisty things when we order some liquid marking paint. Our hope is the ewes all have their babies in the next seven days.

It will only take 20 minutes

Steve Hardin3 Comments

Three days before Christmas and the ground is green and the soil is moist, this is not a normal December for our location. I keep hoping we will get a brutal two week cold spell down to single digits. I am afraid of what will happen with the bugs this upcoming summer. I think they will be horrible.

We had decided that we were going to finally have lambs soon. Since we were making the Christmas dinner the feeling was we would get inundated that morning. So on Saturday Annmarie and I went out to the barn for 20 minutes to move the ram over into the bull enclosure. I went to get panels from the large hay bale pile and Annmarie set up panels in the momma enclosure. I used the tractor to haul 7 panels over into the barn lot and then we hooked the panels together creating an alley way to the bull enclosure. I was one panel short so we pulled over a 16 foot cow panel that was stored over against the barn fence.

We sorted sheep using the chute in the barn and got the ram and three young females off the main herd. None of the females are pregnant and can hang out with him in the separate enclosure. We have learned not to put the animals by themselves as they just don’t do very well, always anxious and trying to get through the fence.

The ram with his three females. They were super happy as no animal had been inside the enclosure for over two months allowing the grass to grow undisturbed. We spent 2.5 hours moving and sorting animals!

I needed to clean out both cars as they both have engine lights on but Annmarie’s car seems to have an electronic ghost. Mine just has an engine light. I got a recall notice last week saying it can be a fuel tank indicator that can cause this and the part won’t be available until the spring of 2019.

I had a friend give me some old Toyota truck snow tires and I used the tractor to lift my trailer and change out the tires. I was pleasantly surprised when the tires fit the trailer. We are back in business and I loaded the trailer up with alfalfa from the machine shed. I will store it under cover in the lamb shed. I can feed the ram out of it and it will be available when I need to start feeding the cows small bales. I have 6 large bales left to feed the cows then I will be using the trailer to feed them small bales of alfalfa. The nice thing is I can pull the trailer with my tractor and get another three bales of hay in the front bucket.

Once I got the trailer into the lamb shed I used the 3 point quick hitch to lift it off of the ball. I hooked the safety chains into the hooks and then just lifted it off. This was very slick, now if only it will be that easy when I go to hook it back up.

I had to go feed and take care of my chickens. I had to carry another 100# of feed out to them. I noticed that the enclosure door was broken. One of the sheep got stuck in the enclosure and she just kept ramming her body against the fence in several places. She broke off one of the 4×4 posts. I ended up installing eyehooks and then using chain and a self tightener to pull the broken post into place. The only real issue is you have to pick your feet up when crossing the door threshold. I happened to spot all these hand grinders on the old house back porch. This doesn’t include the three sets we have inside the house.

I am going to have to install a couple of new posts in the chicken fence and rip out about 50% of it. I no longer need it all around the entire coop. The chickens are free range anyways.

I was supposed to take Annmarie out for her birthday dinner and had managed to keep an outside fire burning for three days. I was burning scrap wood, cardboard and branches that the wind had blown out of the trees. We had no wind for that entire time and when we went to go out to dinner the wind had picked up and was throwing hot coals 20-30 feet.

Annmarie made me put it out before we left for dinner. I actually managed to get the entire thing out and cooled so the wind did not restart it while we were gone.

White Christmas

Steve HardinLeave a comment

Surprisingly we woke up to a white Christmas here in Eastern Oregon. When we went to bed there was no snow, we woke up and viola snow!

I was on turkey duty so Annmarie and Sarah went out to take care of the sheep first thing in the morning. There was a set of triplets in addition to the twins that were born the evening before. The mother did well once we got her in the separate enclosure and her biggest baby could quit following everyone else around the barn and concentrate on her.

We knew the sheep would start popping babies out left and right since we had not had a ram in with them at all for six months prior to us dropping the new ram in with them. We have never had this many ewes this close together before. Our goal was to get lambing over with quickly. Here’s hoping it goes smoothly. So far its a bunch of little brown babies!The snow didn’t last until the next day but it did last most of Christmas Day.

Little bit windy

Steve Hardin2 Comments

It’s been a long week. I am playing catch up and the weather is not really cooperating. Our door latch from Ukraine came this week and it fit perfectly! I was able to get it above the door knob without having to move the knob and I was able to use the hole I accidentally drilled through the door frame 10 years ago. It was almost like I had planned this ten years ago! I talked to Annmarie and I think she is going to print me a plastic bushing on the 3D printer that I can slide into the wooden hole so the door latch doesn’t widen the wooden hole. It is amazing what you can find on the internet these days and have shipped directly to your home. So now none of the dogs can get into the craft room, same for little kids.

The weather has been very strange all week, we have horrible winds. They are sustained around 25-40 MPH with gusts over 70 MPH. Luckily the place is old and has survived 95+MPH winds. The stuff damaged in that wind storm has been repaired or torn down since that occurred right after we had moved in. I have been careful since then to make sure that all stuff is over built due to the unpredictability of our weather and the wind. The wind blows all winter long usually, just not this hard. Our new windows always bow and flex in the wind so we are always surprised at how well they do, none have ever broke in a wind storm. The temperature is over 50 degrees F, which is absurd for a winter in Eastern Oregon. Luckily, our front spring fed creek has been rising steadily over the last two months so there is water going into the ground somewhere.

I started patching all the old curtain rod holder holes in the walls this weekend. I want to get them patched, primed and painted before Christmas. One less eye sore in the downstairs area and one step closer to having a completed main floor. My current dilemma is I cannot find the door to the closet that I removed when doing the floor. At this point I really think I tossed it onto the burn pile and lit it on fire. This sucks but I cannot find it and have dug all around the house with no success. One more thing I am going to have to duplicate. I will finish getting the pictures up on the wall soon also. I am a definitely the 90% project completion type of guy, those last 10% are brutal to finish.

I went outside today to do some more work. The weather was not super conducive to it but it was not freezing so I figured I could get something done. My big goal was to move the scrap metal pile that came from the old house (it has only been there since August 2018). Annmarie can see it just outside the fence through any window on the SE side of the house. She does not like it and thinks I need to move it before our company shows up in January. I was going to bring the old pickup trailer around but it still needs a tire swap and this weather is not conducive to climbing under anything suspended in the air so I opted to use the tractor and just make more trips. After the first load I got distracted and ended up dragging all of the horse poop out from around the barn and releveled the compost pile I had spread out earlier this fall. I need to plant grass seed on it but that is not happening in 45 MPH wind. After every load taken to the metal scrap pile I kept my eye out for more scrap metal along the way, grabbing it off of fence posts and the base of fences. I stash it there all year long as I find it or it surfaces from the ground. I went over and cleaned up the last of the old metal Smith shop area. I took a bucketful of keeper metal to the barn and stashed it in the barn. I took the last of the falling down wooden worktop and put it on the burn pile. I even managed to push the two bucket loads of old hay baling wire that I found buried outside the metal shop onto the scrap pile. My scrap pile is sufficiently big to attract someone to come claim it. It is not worth very much and there are a few gears inside the pile I would like to reclaim if I can find them. I managed to find a manual brake system with the notched locking piece and the handle just stashed over there. I kept that. Eventually I want to put some nonsensical gears and handles and steering wheels throughout the barn.

Annmarie asked me about the grass fields I planted this week so I took the time to run up and check on them. This is good and bad news depending on how you look at it. The first field got done two weeks earlier than the second and got two good rains and some warm temperatures, that is this very nice green field. The second field was two weeks later and I ended up finishing it up in the rain and then it got really cold. It is currently still very dirt like. On the plus side there are no weeds growing either which tells me that the growing conditions are just not there yet. I would love to burn off the barley field but I am afraid to light anything on fire in this wind so it will just have to wait.

I was fortunate to finish the machine shed ceiling support before the windstorm.

We also have a new calf on the ground, it is a week old today. It is probably our biggest calf to date and the mother is still crazy. I cannot wait to get that fence line up so the cows cannot hide down near the creek. They will be stuck in the field away from water. We may need to build some form of three sided, roofed enclosure so the cows can shelter the babies. I will have to consult the wife and mother-in-law for design guidance. I have enough left over 2×8 and 1×12 to make a wooden structure that looks like all of our other outbuildings. I even have some leftover old metal roofing that I can install so it slants toward the hillside so you won’t see it from the houses.

The sheep are so pregnant it is painful to look at them. Every morning we go out expecting to find 8-12 lambs on the ground and every morning we are disappointed. I told Annmarie they were all going to come on Christmas Day and I will have to get the turkey in the oven before helping her corral all the new moms and babies. Today I switched gates around and set up the momma/baby area. I moved a feeder in there for them and filled it with alfalfa. This caused me some problems after the sheep figured out I had the good hay in the momma area. I had to manhandle three ewes to get them out of the area and away from the feeder. I did forget to move one inside gate to allow access to the outside baby area. I will need to bring over some more straw for that area anyways. The goal is to have it all ready so on baby day you just have to toss them in. If you have to do all the setup also its a very long and painful process.

Our 6×8 foot greenhouse came in the mail also. I am going to put it in the orchard after I make a concrete footing for it. If I don’t do that the wind will blow it away. I was going to set it on some loose bricks but after this week there is no way I am going to not attach it permanently with some heavy bolts weighted down with some concrete!

Welding pass

Steve Hardin1 Comment

This week was the last day of my college evening welding class. I passed with a B, for which I had to work hard. I attended every class, got highest scores on the written tests and scored the lowest on most of the actual practical welds. What I did learn was this is a skill that needs to be practiced, a lot. I am not a natural and it would take me hours to learn some particular skill. I am now able to do it, which is a huge leap forward compared to where I was when I started the class. Now I need to figure out what type of equipment I need out on the farm. I really need to get a cutting torch operational and I need a stick welder. The major problem is I don’t have 220V wired anywhere on the farm. I can fix this in the old house but I don’t really want to weld around a wooden building. So I need to look at 120V welders, the good part is I don’t really need to weld through anything thicker than 3/8 of an inch. This will make it easy to cut back on the type of welder I need as I don’t need super high amperage. We also have a propane generator. I need to see how many KWh it puts out and if it has 220V capability. I don’t know as it is for emergencies and we have not had to use it. It would solve a lot of portability problems if it will put out enough juice to run a welder.

I ran out to look at the generator as I am curious now. It will do a 4000 W start and continuous 3250 W, but only does 120 V. The nice part is it has an RV plug so it will do 20 Amps. Further research has led to two SMAW (further use will be stick welding for the uninitiated) welders that run on 120 V. A Hobart Stickmate 160i stick welder for around $570 and a Century Inverter Arc 120 V stick welder for $260. The problem with the cheaper welders is you only can weld about 3 minutes out of 10 minutes and only go up to 90 amps so you must weld thinner material. Since I am already slower than the average welder the down time requirements are not going to hurt me. For you purists out there depending on how the weld was set up and as long as I did a good root weld I could layer in the rest of the welds and still weld thicker material. Luckily for me, I don’t have really anything thicker than 3/8 of an inch to weld and most of those are repairs. I really need a little cart I can put the generator on, propane tank and welder all in one place and have it ready to go. Maybe I need a bigger generator? I probably do not need a bigger generator as I am not a full time farmer working on great big piece of equipment. I am trying to keep our costs realistic and not go all out and buy the most expensive thing. I am also going to do more Oxyacetylene welding, its slow but it doesn’t need any power at all, hard to beat that advantage for some things. I told Annmarie my end goal was to be able to build a 10 foot diameter igloo out of old used horse shoes of all various sizes, old nails, rust and bent shoes included. I have not convinced her that it would be a work of art and not an eye sore yet. I need a few thousand more horse shoes. I only have a few hundred now. I am willing to pay $0.05/horseshoe or $50/1000 shoes, which is way better than the scrap yard. I have not given up the dream yet.

This morning she talked to me about marking the babies and mother sheep when we start lambing. We tried a crayon marker a few years ago and did not have very good luck. Instead of using paint irons where you have to use multiple irons her family uses a L shaped iron and marker paint. She drew it all out on a old envelope to teach me. You create a grid of 9 numbers and use the L iron to create the sides of the grid around the number you want.

I have copied in the four examples she showed me. The I threw me as it is not on the grid she made for me until I said it wasn’t there and she said it equals 0. It made sense when she told me what it was. You just have to have the orientation to the lamb correct and you can match the mothers and babies for the first month at least. She said I needed to just weld the marking rod. I figured out today how to make it without welding anything. I just need to get a piece of 1/4″ square stock 24″ long so I can make it. I will make a wooden handle so it won’t be so cold to handle.

We are very short on rainfall, less than 1/10″ last month. We need some moisture in any form. It can rain for all I care as long as it doesn’t warm up too much and fool the trees.