Today we decided to tackle the new office remodel in the old house. It is too cold to be outside! We are predicted to get snow in the next two days but the wind off of the snow covered mountains is brutal. This is perfect weather for ripping out the interior walls. You could even take your coat off and keep the long sleeve wear on as long as you kept working. If you stopped it got cold again, this is good incentive to stay busy. Mr Professional offered the suggestion to tear out the walls in what used to be the old bathroom. I liked the idea and since we needed to tear down the inside walls anyways we did it. It is pretty easy to reverse and hard to see without actually doing it. I liked it. I went inside and had Annmarie come out and give her blessing. She wants to use the little room for the 3D printer and the laser engraver. This will actually work well and let the main room be used for an office and sitting area. She wants to put in a couple of chairs/loveseat with a coffee table so she can use it when privacy is needed. It will work out very nice. We took measurements for two new windows and we are going to remove the window in the equipment nook to maximize storage space.
Mr Professional and I had a long discussion about what to do about the knot holes and leaking joints on the outside of the house. We are not going to re-side the outside for at least 3 years so it needs to last for a while. We found some nontoxic plastic paint/roofing material we can paint onto the inside walls to keep the moisture away. We looked at spray in foam insulation but that was going to cost $1300 for 900 sq feet of spray. I can get a five gallon container of plastic elastic paint for $240. So we are going to go with the paint on ourself option. It is looking like a couple of windows and two doors are going to cost over $2k. The real expense is going to be if I have to buy more wire to wire the building. I have about 2/3 of a large roll of 12/2 with ground and I am going to use every leftover outlet and switch from every job I have ever done, so I believe there is some gray, brown, taupe, and white colored accessories. The heating/cooling system is going to be around $4k. I am hoping to get the entire thing done for around $12k. We spent a combined 13 hours working on it today. I am going to try and keep track of all the time we spend on it. We also figured out how to move the power box into the attic so it is not visible on the room side and it still meets code by having the front cleared space! Huge win for everyone.
Mouse is totally got the nighttime chores down. I just let him out and walk down to the end of the ram pasture and he is already out and circling the sheep in field #4 and pushing them back into the barn lot. He is liking working the sheep. One of the cows we pushed into the corral on Friday caught him on the left side of his face with their rear foot and scalped a streak of hair off the middle of his head. So he was a reverse mohawk. I took pity on him and cleaned the mud/poop hoof shape off of his face. He is a trooper and is not letting it slow him down.
The club wheat on the farm looks great! On our drive to Adams to get the walnut tree I kept comparing wheat fields and ours looks very good in comparison. I talked to the responsible farmer and he said they are trying a new mineral supplement and it seems to be doing the trick. Time will tell if the moisture will hold out for the needed amount and times.
This has been a long week related to cows. The bull keeps getting out of our pasture and going under the road via the culvert to visit the 100% papered Angus heifers that the neighbor has next door. We pushed him over on Sunday and figured we had the access point hardened enough he could not get through. On Tuesday, our neighbor was texting Annmarie to tell her he was in with the heifers again. This time I had to gather tools after work and Mr Professional had come out and pushed him back into our field. He laid down on his belly in the middle of the stream, reached down with his horns and lifted the panel up and then army crawled under the fence, in the water, to get to the other side. He did this because his normal access point is at the side of the fence but we had secured those enough he could not get through. This led to more additions, some tightening, a few extra panels and a ground panel that sticks forward so he has to stand on it to get his horns into the upright panel, therefore holding it down with his own weight. All of this done by tractor flood lights as it was getting dark and the culvert is down in a hole. I was down there working alone and the bull snuck up on me, I didn’t realize it until he was about two feet away. He scared me so I chased him away, he knew what I was doing and did not really want to leave, it took some encouragement to get him moving. So far it is holding I would like to say it is fixed, but I then leaned toward certain as a better word. After a few minutes and thinking about how often he gets out I am pretty certain he is contained, it looks pretty good and we sure gave it the old college try. It kinda depends on how lovesick he gets, maybe it will be good enough, we will see.
There is another creek crossing further up on our property that was destroyed in the flood that lets him drop down into the creek bed and scoot on down to the culvert. If we can get that crossing hardened enough then he will most likely be contained. The crossings have to be removable in the fall so the spring runoff can happen and nothing gets damaged.
I had the opportunity to get another black walnut tree! This one was a ways away and I did not want to load up the tractor on my trailer and drive over there. I would have to make two trips and decided that taking longer to load was an acceptable trade off to not having to make two trips and haul the tractor. I gathered chains, cables, sheet of plywood to cover the metal ramps, come along and a metal pipe to use as a cheater bar. I picked up Mr Professional and away we went. This sounded like a well thought out plan but honestly I did not take into account the shear mass of a large piece of this wood. It took us three hours and the first half of that time was moving the large base piece onto the trailer first. We needed two come alongs to do it and everything else we brought. Unfortunately, by the time we got done the custom cut shop was closed so the trailer just stayed loaded and I will get it offloaded this week. We will go back into the cue for cutting and may get it cut up in a couple of months. Luckily, I ordered more banding and it’s a different color so it makes it easy to differentiate the trees that will banded and stored together in the old chicken coop. I am even considering getting into the maple pile, cleaning it up and then having it all planed down to useable flat pieces. I can then shrink the storage space it takes by banding it all together and storing it in the coop.
The alpaca seem to have finally come to a consensus and are now behaving. They are such weird creatures. The rabbit is back! I have seen it several times and it is still not afraid of humans, you can get within a few feet before it even moves.
With all this wind we are having the new windmill needed an addition to keep the top plastic bushing in place. This should keep it from popping out now and the windmill can tear it up, which it is doing in the 35-40 mph winds. It is only rated up to 65 mph so we will see how it does in our area long term.
Well the weeds are sprayed and the grass is not tall enough to mow out in the fields so the Four Corners fencing project has begun this weekend. I spent a few hours on Saturday afternoon tearing out fences and wooden stays from the fence lines. I also developed a plan for redoing the fence. I cannot just tear into the ground as the telephone line is buried just outside the fence line and it is not buried 2-3 feet. It is only eight inches deep by our house so I am assuming it is fairly shallow here also.
Today Mr Professional came out and we went down and worked on the fencing all day. We took the trailer down filled with gravel, this was Mr Professional’s idea and proved to be useful as we are about 1/2 mile from the gravel pile and tractors are not exactly fast. We promptly broke out the bolts on the auger on the first hole. It appears that the hard pan is not very deep, about 18-24 inches down. We had to use the breaker bar to keep digging and we never did manage to break through the hard pan level. We just gave up on the digging once we got ”deep enough”. We started a small fire after we started to rip out the fence line and found scrap wood every where. We burned the weeds and a lot of the wood scraps. We managed to dig six holes with the auger and have five more to go. We are going to have to create a wash out area that lets the water run through/under the fence. I think we are going to have to use the old tires to keep the bull from just lifting the fence. He is so painful. We had to reinforce the culvert entrance on Tuesday as he had lifted the fence and went to see the neighbor’s heifers. Today we saw him trying to get through the culvert again but he cannot after our repair! He tried on three separate occasions throughout the day to get through to the other side with zero success.
We got the corner braces in and all tightened down. They look really good and our goal is to make the fence look very nice as everyone who drives by will see this addition. Once we have all the fence up we will take down the inner fence down by the willow trees and start to clear the flood debris out. It is a mess down there now. A few more days and we will get it done.
The spraying that was done two weeks ago is starting to come visible. I was spraying in front of the side by side and driving over the area so I could see where i was spraying. I started to notice some unintended consequences of that choice. Hopefully,, the grass will grow back without too much difficulty.
This week the weather has improved dramatically so the priorities have had to change a little. I wanted to get projects done that set up Mr Professional so he can come out and work alone when I am back to work. So lots of organizing, sorting and cleaning up has been happening. On Wednesday morning we sorted the sheep and pulled off the rest of the lambs. Not sure why I didn’t think of that the first time, but problem solved. We moved all the lambs but three over into the orchard pasture to hang out. I thought we only had three in with the ewes, we spotted a fourth one that evening when we were feeding, a little boy snuck past, he must have been hidden in a mass of ewes. The grass in that pasture is over eight inches tall and needs something to start eating it down so I don’t have to mow it. We want the babies close as they have a tendency to disappear due to predators. We let Zeke, our old border collie push the lambs through the yard into the orchard, he was very happy. All he did was walk up to them and lay down. He has been laying around a lot lately and has started not eating all of his meals. We are going to switch him to soft food to attempt to encourage him to eat. He is probably not going to make it through this year.
We went out to the machine shed and sorted through the piles of scrap wood we got a couple of years ago. It was leftovers we got for a steal and had it delivered right to the house which made it even a better deal. We are now starting to dig through and use the material for various projects around the house. But it was taking up space in the machine shed and we are going to make the old chicken coop the storage area. So we sorted out the junk. Sorted out the stuff we would use once for concrete forms, which are now stored outside the chicken coop and tarped, under the eaves, so we can have easy access to it when needed. We even kept the subflooring sheets and oak plywood sheets separately in the chicken coop so we can use them for the old house. The old bathroom is going to be Annmarie’s office storage room and it will get oak plywood flooring. The floors are slanted and will need to be leveled. The old kitchen, soon to be freezer room, will need to get leveled also but it will just be 3/4” subflooring and 1/2” plywood sheeting on it. We will just be sanding down the original floor like we did in our upstairs rooms in the house.
I took the time to brush the horse. She is shedding something fierce and without another horse buddy to help her groom she needs some assistance. I have brushed her twice this vacation and Sarah brushed out the dogs when she was home so everyone looks pretty good. We came into the house and took out the old TV stand. It is very heavy but Annmarie reminded us we have the shoulder furniture movers so we found those and it made moving the stand an easy thing. I moved the new chest into its spot after cleaning the floor and doing some cord management stuff to organize the electrical mess. Annmarie wants us to use a piece of plastic channel to contain all of the TV cords to make it neater. When that comes we will install it, it does look a lot nicer with the cords contained.
Mr Professional got the side by side up and running in under five minutes. This is without the battery being plugged in. Adding that large deep cycle battery under the driver’s seat was just what we needed to keep the thing going. A dead battery all the time is highly annoying.
The small stuff I ordered for the tractor came this week. The speed handle is installed! This should just come standard on every tractor, I am unsure why they don’t. There are a couple of tool racks that will hold a chain between them now mounted behind the seat on the roll bar. The chain is actually in one spot now not tied down to some random piece of the tractor. The quick hitch is now installed and I have filled the ballast box with horseshoes. So now the Kubota has pallet forks on the front and a ballast box on the back with several hundred pounds of steel in it. It feels a lot better when you are carrying something heavy on the front.
We let the new alpaca out of the orchard thinking that everyone seemed to be getting along. The old adage that fences make great neighbors is still true. By that afternoon Mad Max had the young brown one pinned to the ground and was screaming in his ear. I tried to holler at them to get them to stop but no go. I went over and encouraged him to get off of the baby and strained my right knee. He did not initially take the hint. The alpaca can be very stubborn or determined, depending on how you look at it. We watched them for a while and all seemed to be copacetic. The next morning when I went outside there was more fighting. I went out and chased away the offenders but I could only find the two new young white alpaca and only counted ten. Which meant that the young brown one was missing, but Mad Max was present but one of our other old brown alpaca was missing. I had to walk all the way down to the end of the driveway and found the poor little alpaca pinned to the ground and the older one on top grinding into him. I had to chase him off with my coffee cup as a tool, my knee still hurts so no kicking. When I got back to the now 12 alpaca I wanted to put the three babies back into the orchard with the lambs. But they kept walking away from me. So instead when I opened the gate the seven older ones bum rushed the open gate and went into the orchard. So now the new animals are outside the fence and the old grumpy men are stuck in the orchard. Mad Max is now with the young ones but he has not been any trouble since the split. So now Annmarie asked me if I verified the gender on all three new alpaca. I did not do that. So now we need to verify that we did not end up with a female as we really do not want any cria.
On Thursday we got the side by side ready to spray. I put the first 30 gallons of round up through just spraying our road and driveway down. The only bad part about roundup is it takes at least a week before you can tell something was sprayed and two weeks for it to totally die. We cleaned out the tank and Mr Professional sprayed field #5 & 5A with 2-4-D & Milestone to kill the broadleafs, the thistles are already starting to spread. Unfortunately, the flood from two years ago changed the direction of the creek and one of the tall banks is seriously undercut. We have probably already lost eight feet of hillside and may lose another eight feet. If we lose that total 16’ I will have to move the fence. There is a very large curve in the creek now. We finished cleaning up and tossing everything onto the burn pile. I will need to get that burned again in the next month.
The big push now will be to get the spray onto all of the hay fields. We need to do this as soon as possible and then once that is done we can start fixing the fence down by four corners. As soon as that fence is done then it will be repairs on the hay baler and getting all the tractors tuned up and oil changed so everything is ready for haying season. We will be getting the barns cleaned out also so we have a place to put the new good hay.
We spent most of Monday getting the black walnut tree cut up into boards and a mantle. I am not yet sure what to do with the mantle but if you know someone who needs a 9 foot long, 12×20” piece of black walnut with one live edge still attached let me know. I have it stashed in the machine shed under a tarp to keep it clean. The rest of the lumber we took out to the now clean old chicken coop, stacked and stickered it, then banded it all together to help keep it flat while it dries out the last little bit. The tree had been dead for a few years already so it should not take several years. The wife and I discussed the barn lot crossing and the cost of a new culvert. It was going to be $1800-2000 for a new 3 or 4 foot diameter culvert. Annmarie pointed out that I could just make a buttresses on each side and deck the gap with railroad ties and anything would be able to drive over it. So the new plan is to make two concrete U shaped ends and then bridge the gap with railroad ties. This will be easier than trying to purchase new culvert and will have the added benefit of creating a lot of space for water should it try and flood again in our lifetime.
Mr Professional and I put up clear plastic on one of the wall openings in the back of the old chicken coop. We did this so the light could still come in. The front part of the coop is about 33 feet long so we sheeted it in plastic and then put up OSB board to sandwich the plastic between the board and the chicken wire already stretched across the windows. We sealed up two different animal access points and now nothing can get into the old chicken coop but mice. I will need to put out a lot of poison now to prevent the mice from taking up residence. One of the cats had been keeping the room clear of mice, we knew this because there was some untouched grass seed in the building. After we got the windows covered we cleaned up and were ready to move the stuff from the old house out to the chicken coop for storage purposes.
Today, before Mr Professional came out I went upstairs and stained the second side of the bathroom door. I will seal it tomorrow and then it will be ready to install. Mr Professional had told me that one of the lambs was limping last night when we fed. So this morning I went out and cut a short length of PVC pipe, I then split it in half lengthwise. Once I had it split I filed down all of the edges to make them rounded and took a roll of coban and the splint out to the barn with me when I went to let everyone out. I managed to find a boy lamb who was limping, caught him and after everyone left the barn I was able to set him on his butt and wrap up this leg and splint it with the coban and PVC. It worked well, the only real problem was it took the lamb some time to get used to it and I found another boy lamb that was limping and had a floppy front leg. So now I will need to make another splint in the morning and splint the second lamb’s leg. I have no idea where the idiots are injuring themselves.
So Mr Professional and I sat down to discuss the new plan, we calculated how much rebar we would need and we picked it up today from the scrap yard. This is the new engineer approved plan. I am going to borrow a dump trailer and pickup the 3/4minus and concrete sand myself and take it right to the job site and dump it all within arms reach of where we need it. We can get power to the bridge with three extension cords and will mix it all right there. I just need to get the Portland Cement and lime now. It needs to warm up quite a bit so the water level will drop some before we get started.
We started cleaning out the old house to get ready for the office build. This is a perfect project to work on due to the frequent rain. It took two full 16’ flat bed trips to empty the two rooms out! There was quite a bit of unused wood stored in the old house. I am thinking about moving all of the unused wood from the machine shed into the old chicken coop so that all of the wood is in one spot. We are going to tear out the entire inner wall so I can run all new electrical wire quickly and easily using the least amount of wire. Luckily, I have quite a bit of 12 g wire leftover from wiring our house so I think I already have what I need. I also have a variety of switches and outlets, all different colors and types but I am determined to use up what I have on hand before I get any new supplies.
We used the tractor to move the trailer and it is a lot easier to maneuver the trailer. We got the first load into the old chicken coop but by yesterday evening we did not want to unload the trailer so we just tossed a tarp over it and started to work on covering up the access hole in the side of the building. This hole has been uncovered since we moved here and Annmarie has wanted it covered forever. We also slapped a couple of pieces of wood at the peak and even added an extra piece as a woodpecker has decided to put a hole in the building so it can nest in the attic. The freezer room is just going to get the floor leveled and power installed for now. It is outside the office area we are building for Annmarie and is in my section of the building. The second section will be done at a later date, most likely after we get the inside bathroom remodeled. Once the walls are stripped I will get two doors ordered and three windows. But the wiring can be done while that stuff is getting ordered and shipped.
Stewart Creek Somethings 