wheat

Left out in the heat

Steve Hardin3 Comments

I spent Thursday on the tractor going in circles making little bales of hay for eight hours in field number one. That seven acres seems to take days to bale due to the shear volume of grass that was produced this year. At only 40# a round bale it takes 50 bales to make a ton and there is around 20 ton out in this field alone. We are counting bales as they come out of the field so we will know when the field is empty how many ton of hay were produced. The bale counter has a lot of false positives as it counts every time the dump opens up even if a bale is not discharged. I do wear hearing protection but both of us had been wearing some type of ear bud/in ear speakers to listen to music while baling. This is problematic as the baler has a siren to tell you when it is full and we cannot hear it. You also cannot hear when something changes with the equipment. You can hear most breaks or soon to be broken issues but not while wearing headphones. So instead we now have a Dewalt radio bungee corded between the roll bars on the tractor, blasting music and we wear ear muff sound protectors. This makes it much easier to hear any changes with the equipment. I know this sounds counterintuitive but it really does work!

Mr Professional came out and did an oil and filter change on the John Deere tractor. I need a strap wrench for the fuel filter before it can be changed. I have ordered this already and it should be here by next week. I had to stop several times while bailing and make adjustments to the baler. It keeps needing adjustments as the temperature outside continues to rise. Once I got the chain adjusted I had to adjust the rear hatch catching mechanism. Also the discharge spring stop weld broke so I had to beat down the metal tab three times. This has been welded with some extra angle iron added to take the continuous pounding every time a bale is discharged. We need more tools in our tool bag. We need a full set of metric wrenches, not just the 15 mm and 10 mm wrenches. Plus, I noticed a couple of holes in our tool bag, so a new tool bag is probably also in the works. The wheat field is starting to turn. They won’t be able to harvest till the end of July this year. Harvest will probably be 3-5 weeks later than normal for us.

I was going to call it a day when Mr Professional said he got someone to come out and buck hay bales with me. This sounded like a great idea so I came in and fired up the pickup and we went out to pick up bales. We picked up 100 bales (2 ton) out of field two and came into the barn lot. Unfortunately, we filled the easy spots last time and that meant all of these bales needed to go to the top of the pile. We had 10 of the 100 bales into the barn when he gets a phone call and has to leave. I ended up moving about three ton of hay farther up into the barn and then unloaded the two ton from the trailer into the barn. I was very tired by the time I was done. Since I missed dinner and Annmarie had gone into town to do some work, they had left me dinner on the stove, Mashed potatoes and meatloaf! Annmarie always adds lots of stuff to the meatloaf so the vegetables are hidden inside of it, mostly carrots and onions. I zapped the potatoes in the microwave and then doused the meatloaf in a thick layer of real ketchup. Mind you I had stripped down in the laundry room to my tighty whiteys and needed the shower but it was nine pm and my last meal was at 7 am. I was hungry. So I ate dinner on the front porch of the house in my underwear while I watched the sun go down. It was a very spectacular dinner.

I had to order more diesel. This time instead of ordering 100 gallons I just told them to fill both sides of the tank to the top and we would go from there. I think its a 150 gallon tank. The propane company sent us our annual contract, we used 346 gallons of propane last year. Interesting enough, they set our usage at 800 gallons next year therefore making our monthly contribution double what it would have been. I sure hope the price doesn’t double or our consumption double. Every since we had the coolant leak repaired our propane usage is about half of what it used to be, which is why I think they are budgeting for 800, as I suspect our usage was that high before the repair.

I was in bed trying to go to sleep over the crying puppy (we are crate training her) and the noisy frogs when Mr Professional called to say someone just pulled up to the field with a pickup, a trailer and a loader and two people were out in the hay field with headlamps on. I ended up getting out of bed, putting on my wild west attire and headed out to the field. Before I could get out there he calls back to say its the bee people. They were adding hives to the ones they already have in the neighbor’s fields. They had forgotten exactly which field but had the right location. It was directly across the road from where they were looking. I was back in bed and asleep by midnight.

Cows have not been cooperating

Steve Hardin1 Comment

The club wheat on the farm looks great! On our drive to Adams to get the walnut tree I kept comparing wheat fields and ours looks very good in comparison. I talked to the responsible farmer and he said they are trying a new mineral supplement and it seems to be doing the trick. Time will tell if the moisture will hold out for the needed amount and times.

This has been a long week related to cows. The bull keeps getting out of our pasture and going under the road via the culvert to visit the 100% papered Angus heifers that the neighbor has next door. We pushed him over on Sunday and figured we had the access point hardened enough he could not get through. On Tuesday, our neighbor was texting Annmarie to tell her he was in with the heifers again. This time I had to gather tools after work and Mr Professional had come out and pushed him back into our field. He laid down on his belly in the middle of the stream, reached down with his horns and lifted the panel up and then army crawled under the fence, in the water, to get to the other side. He did this because his normal access point is at the side of the fence but we had secured those enough he could not get through. This led to more additions, some tightening, a few extra panels and a ground panel that sticks forward so he has to stand on it to get his horns into the upright panel, therefore holding it down with his own weight. All of this done by tractor flood lights as it was getting dark and the culvert is down in a hole. I was down there working alone and the bull snuck up on me, I didn’t realize it until he was about two feet away. He scared me so I chased him away, he knew what I was doing and did not really want to leave, it took some encouragement to get him moving. So far it is holding I would like to say it is fixed, but I then leaned toward certain as a better word. After a few minutes and thinking about how often he gets out I am pretty certain he is contained, it looks pretty good and we sure gave it the old college try. It kinda depends on how lovesick he gets, maybe it will be good enough, we will see.

There is another creek crossing further up on our property that was destroyed in the flood that lets him drop down into the creek bed and scoot on down to the culvert. If we can get that crossing hardened enough then he will most likely be contained. The crossings have to be removable in the fall so the spring runoff can happen and nothing gets damaged.

I had the opportunity to get another black walnut tree! This one was a ways away and I did not want to load up the tractor on my trailer and drive over there. I would have to make two trips and decided that taking longer to load was an acceptable trade off to not having to make two trips and haul the tractor. I gathered chains, cables, sheet of plywood to cover the metal ramps, come along and a metal pipe to use as a cheater bar. I picked up Mr Professional and away we went. This sounded like a well thought out plan but honestly I did not take into account the shear mass of a large piece of this wood. It took us three hours and the first half of that time was moving the large base piece onto the trailer first. We needed two come alongs to do it and everything else we brought. Unfortunately, by the time we got done the custom cut shop was closed so the trailer just stayed loaded and I will get it offloaded this week. We will go back into the cue for cutting and may get it cut up in a couple of months. Luckily, I ordered more banding and it’s a different color so it makes it easy to differentiate the trees that will banded and stored together in the old chicken coop. I am even considering getting into the maple pile, cleaning it up and then having it all planed down to useable flat pieces. I can then shrink the storage space it takes by banding it all together and storing it in the coop.

The alpaca seem to have finally come to a consensus and are now behaving. They are such weird creatures. The rabbit is back! I have seen it several times and it is still not afraid of humans, you can get within a few feet before it even moves.

With all this wind we are having the new windmill needed an addition to keep the top plastic bushing in place. This should keep it from popping out now and the windmill can tear it up, which it is doing in the 35-40 mph winds. It is only rated up to 65 mph so we will see how it does in our area long term.