Today I finished painting the downstairs! I even considered starting in on the wood trim downstairs but I really want to do the windows first as the bugs have started coming around. I have the caulk to seal the wood trim to the window and the walls so no bug can sneak through. But the wooden shims have not arrived yet. I purchased a box of them and they will be here this week. I wanted cedar shims and I am going to leave the cedar closet lining boards I put up in the windows temporarily in place and just put the trim over them. They have helped keep the bugs out.

So instead I went out and started working on the Bull Enclosure. It will house the rams also when we are not using them. We have decided to pull the male species off of their respective herds at least a month prior to anyone having a baby. We don’t want the mothers to be stressed or harassed. I marked of a pen in the barn lot that will allow us to use the old lamb shed and lean to out back as shelter. The shed will be off limits unless we allow access. I have set it up so I have opposing gates that will allow us to block off the shed or allow them access to the shed and no where else. I broke out the hot pink paint marker and a tape measure and put a T sign every 8 feet. I will need to dig 57 holes! I think if I reuse what is present and use the old cedar posts I think I can come up with 40 posts maybe 45. I will buy the rest. I want to use railroad ties in the corners and two next to each gate side. I am going to install a 10 foot gate near the shed and another 8 foot gate on the back side of the fence past the lean to. I am contemplating one more near the culvert, but I don’t think so. Each gate is a weakness to be exploited by the bull. I managed to get 11 holes started tonight. I was unable to drill a single hole down to the depth needed even as wet as it has been.

The mistress was working hard and I had to replace one bolt on the auger and just as it was getting dark the shear bolt for the auger gave so tomorrow I will need to replace it before I can get started. My goal is to get all the holes started this week and then take a five gallon bucket of water and put it in each hole. I will do this every day and then drill it out the next day until all the holes are the right depth. I will start setting posts as soon as I can get a hole down to the right depth. I will set all the posts and put woven wire and smooth wire on the outside of the fence and I will line the inside of the fence with 2×6 boards. I will have to go 4 boards high to provide a sufficient barrier. So I will need to buy 2000 linear feet of 2×6 which also happens to be 2000 board feet. I want to buy 16 foot boards as I put the spacing at 8 feet apart, this means I need 125 boards. I will also need a saw and a whole bunch more wood anchors, another 500. This is the expensive part. That will cost me around $400 just for the metal screws.

I have the 10 foot gate, I will have to go scrounge around in my gate pile to see if I have another 8 foot gate. I may need to use a 6 foot gate.

The sheep have been hanging out on the back hillside. The gate nearest the creek is so badly damaged that it is not useful and needs to be replaced. I have simply not gotten to it and the sheep needed to go out on the back hillside anyways. We have had so much rain in the past few days that the back creek is up about 8 inches and running muddy.