Stewart Creek Somethings

I should really break this up into a couple of blog entries but I did a little bit of everything over the weekend so I am just going to lump the whole weekend into one big blog. Let’s start off with the great news, the wheat has been harvested and it did very well for this place, it came out to 47.65 bu/acre, anything over 45 bu/acre is very good for this soil. This is even more amazing considering how little rain we had to finish off the growing season. They disced a fire break around the entire outside of the field so that worry is gone.

My outside plant is now on a drip line so it is loving having all the water it can drink. It is blooming for the first time ever! Our deck plants have water also but we got it to them a little late so one planter has died and the other is struggling. Our system is working, so we are going to add two more hanging spots so we can have flowers across the front deck next year.

I was cooking breakfast yesterday and saw a black cow out the back window. I asked Annmarie to go out and let our cow back in. I thought that one of our cows had gotten out and wanted back in. I saw Annmarie go out to the ram pasture and open the double gates. This was the go signal for all the sheep in the barn lot. They ran Pell Mel for the open gate. Annmarie blocked the gate and told the sheep to stay but when she moved the sheep bum rushed the gate and ran out onto the back hillside and then down to the orchard. All the cows ran out onto the back hillside. Annmarie came running inside for help and I made it to the lower hillside gate before the cows got down below. We tried to push them down but then we realized it was not our cow! Instead we just left the gate open. There is not really any food on the hillside we knew they would come down eventually.

I posted a photo of the brand to Facebook and we eventually had someone call us today and say they thought it was their cow as they are now running cows on the Broken Spur land. They came up today and we walked up and pushed the cows back to the corral. Their cow sorted right off and the cows loaded right up. Chance got to go out with us and work the cows. I am sure he thought it was a little weird when I started hollering at her to go “left” to circle around the cows and she did! She does know her left from her right when she wants to pay attention. We get someone’s cow about every two years, they wander onto the property.

My goal for the weekend was to get the granary bottom welded and together. Since I am a fairly inept welder and am now learning to wire weld instead of stick weld I have been having some problems. Mostly I have not figured out how to fill in with wire when I have air gaps between the metal. I am also having a hard time adjusting the wire feed speed to match my use and hand movement. I started at 180 speed and ended up at 250. I was having some pushing back going on at that speed so I probably need to be welding at 240-245. Using the higher speed I was able to keep a continuous bead going. I did figure out how to fill in but it was not very pretty, but I got it done!. I welded the wire to the copper center thingy on Saturday. I watched a video that said there was a tool you could use to clean out the hole so the wire would thread easily. I do not own such a tool but there were three extra tips with the welder so I swapped out a tip. I kept a longer wire by speeding it up so I was not welding so close to the tip.

Saturday after the cow debacle I decided to go pick blackberries. We are not going to get hardly any fruit this year so I will need to fill the freezer with blackberries. I figure I will need to pick about 30 gallons. I spent three hours picking and managed to pick three gallons. Annmarie got them all packaged up for her breakfast smoothies. I will need to pick some and package them in 6 cup increments, we use those for pies! The wild blackberries make the best pies, especially if you keep the sugar to a minimum.

I spent three more hours on the grain bin today and got the entire bottom welded on! I just have to drill the holes for the grain gate and get it installed. I am going to put a foam seal on the lid so it doesn’t leak water but it should not. I will need to install three bolts to block off three holes in the side. I am going to just install the bolts and washers instead of fighting with welding something over them. Basically, I am going to take the easy way out! Once I get that done I will need to make an elevated wooden stand about 16 inches off the ground to place the granary on and it will be in service.

I was going to make another grain bin but the sheet metal alone was going to cost me $660. I was able to purchase a 28’ tall grain bin for $750 this weekend on Facebook Marketplace. I have already leveled a spot and filled it with six inches of gravel. We will need to get our large grain elevator functional. I would like to get it running off of the tractor’s pto instead of the old gas engine that is on it. I think I saw an old fill trough somewhere on the farm but I cannot remember where. It slides under the feed opening of the auger so the grain stays clean.

We purchased some cow feed and I was able to get it unloaded and moved into the machine shed with Clementine. This doesn’t sound very exciting but the lift capacity on the tractor is only 1100# and the pallet weighed 2000#. The guy dropping it off stood on the back of the tractor when the back wheels came off the ground as I was trying to slide it out of his horse trailer. It was all the weight I needed to get the feed out of the trailer. I was then able to drag it backwards with only the front tires touching the ground. You have to steer backwards when the front tires are the only thing touching the ground! Once I had it lined up with the machine shed I was able to just push it into place! I was sure I was going to have to break it up and move those 50# bags by hand. Where there is a will there is a way!