It is definitely winter just due to the fact that it is the middle of November. The weather doesn’t seem to have admitted that it is winter yet but we are having to feed the cows and sheep so we are calling it winter. The leaves just finished dropping off of all the trees.


I had this plan to buy some hardened drill bits so I could drill out the 7/8” holes in the tractor 3 point weight bucket revamp. Unfortunately, one of the pieces that I used had been cut by a torch and I used that end as the sticky out part for the three point. I think the cutting torch tempered the steel some because I am having a very hard time drilling a hole in that piece of metal. I went down 8 sizes and am creeping up on sizes to get to 1/2” hole and I was on the six drill bit when the DeWalt drill started smoking. I thought I had overheated the drill bit even though I was spraying lubricant. So I quit drilling and noticed that the smoke was coming around my hand from the drill. I am not sure how to activate the DeWalt warranty process but I am unclear if I need to just burn it up totally so they don’t think I am trying to cheat them?
I really want one of those plasma cutters but after talking to someone who has one I really need to have 220V installed in the machine shed for one to work correctly. That 220V project is moving up the list fairly quickly.


I did get the silver maple tree the kids gave us in the ground and surrounded by a ranch panel (now $32/ea). I attempted to drill another hole for a walnut tree and hit a rock and snapped a shear bolt. I assumed that the kids had softened the bolt as they had just used the auger to plant trees also. So I replaced the bolt and attempted to finish the hole. Nope, I snapped that bolt immediately! I am obviously going to have to drag the hole by hand as there is a large rock down in the hole. I want to get two more holes dug and ready with panels around them so I can transplant two walnut trees.
We do have two walnut trees on the place and I would like several more. We have never tried to dry them out and eat them before. So Annmarie emptied her herb hanging drying rack and I spent 90 minutes cleaning walnuts. It takes longer than I thought it would even with a knife and gloves. I cleaned about 120 walnuts and tossed them into the dryer. We are going to see how they taste in a few months. If they are good then we will make plans to clean a bunch more. I would love to be able to try and grow filberts but the cold can be brutal on them. As the weather continues to change it might be possible but I am not sure how old I would be before an edible crop was present.
We really do only have 12 chickens left, ten of them are hens. I have counted them several times now and the number is not changing. Now there are double chicken doors the raccoons should not be killing anymore at night.


I used my two extra cattle panels for enclosing the blueberries in the orchard. I had to jury rig an entrance and it will just need another cattle panel cut to size when I get another. I had to weed eat a clear spot first to install the fence. When I came back with more supplies one of the cows had already pushed into the open end. They had the entire orchard and it wants to get in with my blueberries. I suspect the fresh cut grass scent was just too appealing to pass up on.
I had to feed the upper cows from the round bales outside. We had nine rows and after 6 weeks we now have seven rows left. At this rate I may not even get to use a large bale.



I did do some more house work. I have been spending more time on the breeze porch with my plants. I have about 35 plants to take to work for Christmas gifts, several are new varieties that I have never taken before. I keep trying to start several small trees from seed but I keep screwing it up and letting the seeds soak too long. I think I just need to plant the seeds and just keep the soil moist. If I use my warming mat and the heating light I should be able to get them to sprout.