Farm

Tile headway made

Steve HardinLeave a comment
I made a note to myself of all the things I need to do in the two weeks AnnMarie is gone. The fact that I have about six weeks of work on the list is meant to motivate. Sarah came over Monday night and watched the puppy so I could work on finishing getting the tile glued to the floor. I finished!! Now I need to let it cure for two days and get the grout spread out. 
Today, while at work I got a call from Donna about one of the alpaca getting some wire wrapped into its fur. I thought it was just a little piece. When I got home I looked at it and it was a large strand of barn wire wrapped around a brown alpaca’s neck. It was trailing about ten feet of loose wire. I went to the old house and grabbed a pair of wire cutters. I tried to catch the alpaca but it stayed just out of reach. Running it down was not going to work. I opened the gate on the hay end of the machine shop. Despite acres of green grass all of he alpaca ran towards the hay. It makes no sense that they would do this.  The one I wanted plus two others ran inside and I shut the door. I chased the brown alpaca around the hay until I managed to get a rope around its neck and tied it off to a railing. I then cut the wire in two places and managed to pull it out of the hair. It was not deeply embedded in the skin or hair. It was laying on top and had not hurt the alpaca.  As I walked between the three alpaca they started to spit on each other!  I was hit in the crossfire. I hollered at them to stop and managed to get the gate opened so they could spread out and quit spreading their stomach content onto me.  
I have arranged for help to come out on Friday and Saturday. I have some hard manual labor lined up for them.  I want to shear the alpaca on Sunday. It all depends on whether I can get the table built. I picked up the pipe parts and plywood today. 
 

Killed mower again.

Steve HardinLeave a comment
I got AnnMarie to the airport bright and early and after breakfast and puppy play time it was time to work. I wanted to get the upper prime pasture finished. After that the only thing to mow was the upper hay field that didn’t get planted. It’s super tall and full of weeds but as wet as it’s been there is probably running water out in the middle. Tractors sink in the mud!  
I mowed the fence lines and my T post line from the fence I did not get installed. There is a lot of water still out there!!  I tried to mow around the muddy parts to give some indication of where it was safe to drive a tractor. Almost 50% of the “upper prime squared” field (new name for the part I started fencing in last year) is swamp and running water. I couldn’t get close enough to mow as I was getting stuck with my little light tractor. If not for being able to push the tractor 8 inches at a time by planting the bucket and rotating it. I never would have gotten out of the mud. As it was I still almost didn’t get out. I just kept finding more swamp. I spotted the baby deer again today. 

I really think I am going to have to dig some more trenches and subdivide the upper prime squared field. Create one side for hay and the other side for animal grazing.  Even with that the animals won’t be able to graze until late July. This will require me to put in another gate into this new pasture. I like having a late pasture available. I liked the hay more but not being able to actually run a tractor over the ground is a real problem. 
 
See the standing water in most of the above picture?  Swampy ground. 
 
I had to push myself out with the bucket a few inches at a time. 
 
The upper prime squared pasture is very tall. This is mostly grass, volunteer wheat and barley. I tried to knock down some of the ten foot weeds.  After mowing around the water I went up along the upper hillside fence line. I was clearing a section of fence that needs to be repaired. This is not an area I normally mow. I hit a hug rock pile and the tractor started to shake and mower made horrible noises. My newly repaired and rebuilt mower. I got out and tried it again, same horrible noise. I figured I had a bunch of barb wire wrapped around the blades. Nope!!  I somehow sheared off one of the two blades. It looks like I can just remove the metal disc and replace the one blade. The other blade needs to be bent back into shape also. Damn mower!  So now my mowing days are done. I will have to get the disc off tomorrow. 
 
The completely mowed upper prime pasture. 
It’s Father’s Day today. I have been trying for over a year to get AnnMarie’s grandfathers zippo lighter to work. I gave it a shot again today, my fourth attempt. I had to ream out the flint chamber as it had clogged up so much the flint could not touch the roller. This made me very happy!  It will only hold one piece of flint in the flint holder.  I stored two more in the bottom of the lighter just like my grandfather used to do. 
 

Weed mowing.

Steve HardinLeave a comment
Its obvious from this picture that my mistress needs some TLC. She is dirty and it just keeps getting worse. I am trying to get the field mowing done. But there is a lot of it!  I have all the area around the houses and all the way down to the school house done now. I just need to get the upper prime pasture. It’s not very exciting, round and round we go. Friday, I had a baby deer jump out of the grass just before I ran over it. It was little and kept trying to get through the woven wire to get back into hiding in some other tall grass. It was fine. I have seen hundreds of vole. I also saw two rock chucks.  They had snuck down off the hillside to come down to the waters edge and eat. Of course I had no rifle as that is something I don’t carry on the tractor. Zeke had snuck out of the yard so I sicced him on them. He caught one and shook it a little bit but it got under a rock crib and he could never get at it again. I am always surprised when we can call the dogs off of something like that. 
I had another coworker’s son out yesterday helping me clean out the barn. I got the tractor in there and pushed it out one end and had johnathon shovel it out the other. The hardest part is getting it loosened. I did as much of that with the tractor as possible. One more day to get the barn totally cleaned out. 
AnnMarie is off at Berkeley and I have a honey do list long enough I am not sure I could get done if I had vacation for the next two weeks!  The new puppy is dragging me down. Someone has to entertain him in the evenings. 
 

Sheep success!

Steve HardinLeave a comment

We had some great luck on Thursday!  One of the sheep buyers from last year randomly called AnnMarie and asked if we had sheep for sale. She negotiated a fair price for both parties.  He wanted to come over on Friday but she had to work and I needed to dig out the barn some more to allow panel placement. 

After two and half hours of digging on Friday I had managed to clean out about Six feet of the barn. It’s slow going.  I had already broken one tine on a pitchfork and bent another one on a second pitchfork. It sucked. I finally decided to see if I could fit the tractor inside the barn. It fit through the door with a couple of inches to spare on each side. Unfortunately, I had dug a trench for a panel and had the tractor on three tires trying to keep it from falling onto its side. In 30 minutes I managed to dig out more than I could of done in five hours by hand. It was enough to get the panels in place. I used to always tell AnnMarie that the tractor would not fit into the barn. Funny how when I have to do all the digging suddenly I figure out a way to make it happen!  
This plan to get ready for the sheep sorting threw me off finishing the tile floor on Friday. AnnMarie had went out on the back hillside Friday evening to bring all the boys into the ram pasture. There should have been 22 animals there was only 12!!  We are not sure what is happening. We have not seen any predators but the grass is very tall.  I need to mow but the mower has been out of commission. They called Friday at noon to tell me it was ready, $1000 to get it rebuilt. I went into town late afternoon to pick it up before heading to work. We are going to have to contemplate the cause of this loss. This could be a cougar, wolf problem. We have not seen anything harassing the sheep or cows since our dog problem. Whatever it is the sheep are far easier to kill than the cows 

We had to get up early on Saturday so we could be out sorting at 0700. AnnMarie let me sleep in till almost 0630. This was very nice as I had gotten in late. We called Sarah to get her to come out and help us. 
I wore my “sheep sorting apology” shirt just in case. AnnMarie started out by running both dogs together. This caused much swearing. I went to the barn to finish getting it ready. At one point Annmarie called us into the ram pasture as she needed a human fence because the dogs would not listen. I offered my assistance, T-shirt turned toward her, as she impaled me with her narrowed eyes and proceeded to tell me where to put my offer. I made a great silent fence after that. Sarah and I had just had this whispered conversation in the barn about me helping run the dogs. I had predicted this outcome. Not sure why I offered, probably just to rile her up a little. She gets better looking with a little ire in her blood. 

We ran the boys into the chute and sorted off two boys and the ram then ran them out of the barn back into the ram pasture via the swing gate. We managed to get the mommas and babies in through the front of the barn. Tanner was helping us also. He was more like reluctant boyfriend help. We needed 29 sheep from this group to make our agreed upon 40.  Unfortunately, were counting on 20 from the back hillside not 11. So we started sorting off everything we thought was three months old off that could be weaned. We herded the keepers into the almost empty hay room, this kept them distracted.  Our buyer showed up about 2/3 of the way through the first sorting. He was talking to her as I was on the other end of the chute. Turns out the sheep he bought from us last year turned out great!  He was surprised at how fast they put on weight and their low maintenance. He said that our sheep are learning to forage at a young age because of our pasture type. Their mothers teach them to look for food. He wants to buy sheep from us every 2-3 months. The reason we were going to downsize again is because we cannot find a consistent buyer. If he would take all the female babies before 5 months old we would never have to run two herds. This does mean however that we will need to run the sheep in nightly so we can tag and band and pay better attention to our genetics. We talked about getting a cull color ear tag for the girl babies so we can easily sort, green=good. I wonder if they make a gold tag= $?
So we tossed back several females and we put the ram back in with the herd. We might be able to produce 70-100 babies a year maybe 150 we will have to see. This is enough money to get us our winter feed!  Now that we have the hay loader we can have it delivered on a semi truck and unload it. This will give us a much better price. 

Memorial weekend work

Steve HardinLeave a comment

The grass on the front hillside is too tall again. We had set up a panel fence but after three days the nephew started digging out the barn and the sheep got loose. They didn’t finish their job and eat the hillside down so I don’t have to break out the whamplidyne weed eater. I used the new weedeater to clear the yard and behind the garden on the back hillside. It cut right through the huge thistles!!  

 
You can see that the sheep are not done with their job. Gizmo has discovered the joys of sheep pellets. They are kinda like skittles for dogs. He loves them!!  
I wanted to fence all weekend but there is still tiling to be done inside. I did spend half a day moving the straw pile from the barn. The barn is about 25% dug out. There is a lot of straw. 

 

I did spend half a day trying to finish the tile. I have about three hours of tiling left. I plan on doing that Friday morning. I also wanted to mow with the tractor but when I called they said they had to order parts to repair it and it was not ready. I kinda figured that was going to happen. On the plus side one of my large tractor tires had a leak and they found all three holes and repaired them for free!!  I dropped off my spare trailer tire to be replaced also. It has perpetually leaked and they can never find it. 
 
The cheatgrass is starting to head out. I really need the mower to whack it all down to ground level. 
The entire area is still green its amazing. 
I used the dogs today to move the sheep. Mouse did better, he did listen mostly. A vast improvement over two weeks ago.