haying

Haying virgin

Steve HardinLeave a comment

The farm parts place came through in spades! My new driveshaft came in on Monday and I was able to pick it up that evening. Now it was 28″ and would need to be cut down but I had purchased a grinder that went with the new 60V DeWalt battery. It is amazing! There is no noticeable difference between the battery grinder and a plug in one other than pure convenience. Electric tools had to be able to get there eventually.

On Tuesday afternoon I cut the driveshaft, attempted to install it and had to cut another 2″ off to make it fit properly, this took a while. I was now ready to cut some hay!

This is me ready to cut some hay. I spent another 30 minutes on the internet and watching YouTube videos trying to figure out how to rotate the drum to behind the tractor for transport. I never did figure it out. Yes I read the instruction manual, but it was originally written in Italian and then translated into English. There were about 20 pages of how not to cut your hands or feet off because the mower blades are rotating. So this means I cannot go through narrow gates, it is possible but it does limit the gates that I can use.

I fired up the drum mower and started to mow in the cow pasture. I figured it was a great place to start and work out the kinks. Yes, there is a learning curve on where you can drive and how fast you can drive. After about an hour I started to hear this thunking noise. I finally stopped the mower, lifted it and waited for the blades to stop. The blades actually take about a minute to stop rotating and after hitting a rock and slicing it in two I figured out why the manufacturer had 20 pages of instructions on how not to slice off a body part.

There was a skid plate off of the bottom of one of the two drums that had come loose and was held on by a single bolt. Three bolts had already fallen out. I attempted to take a bolt out of the intact side but was unable to get one loose. So I had to take the loose one out, it came out with my fingers and then I went to Pendleton. Everything is from Italy, so it’s all going to be Metric. I had my fingers crossed and hoped I could find replacement bolts. I found 6, I needed 3 but they only had them in alloy not stainless steel like the ones that fell out. So I grabbed all the alloy they had and went home. I was putting the third one in when I realized something was different about the drum plate I was installing and the intact one. There were 14mm spaces between the bottom of the drum mower and the skid plate. There were no spacers when I found it. So, I had to go back to town and find something that could act like a spacer. I did and managed to get them installed. This is the loaner mower!

I started mowing again and just kept going until 2230 at night. I am definitely going to have to invest in some kind of aftermarket lights for the roll bar. There is 300# of antique tractor weight discs in the tractor bucket to offset the mower weight. So when I get the bucket high enough into the air to see with the headlights the tractor becomes very top heavy. I almost tipped it over twice. If I had roll bar lights I could keep the bucket closer to the ground and it would be much safer.

I came back on Wednesday and was able to finish both fields by 2100. So about 11 acres cut in 11 hours. Now I think in all reality that number could be 11 acres in 6 hours without the breakdowns and learning curve. Its supposed to rain.

Hay equipment is here!

Steve HardinLeave a comment

Well, the much needed hay equipment is here. It arrived on Friday. I had Tex come out and start cleaning up fencing scraps and wood scraps. We have them strung all over the farm from doing all the fencing, since a scrap guy is coming I want to try and get all of it cleaned up, sent away or burnt. The new burn pile is already starting to grow. They tried to deliver the equipment on Wednesday but I was not available for a 4 hour window and told the clerk on the phone that they came at the end of the four hour window last time and if they would do it this time I could do Wednesday. She said no, I had to be there the entire four hours. We pushed out the delivery day to Friday as I knew Tex or myself would be available. I had to go into work that morning and was hoping to be done by 1100. They called me at 1040 to say that they were ready to deliver and in Pilot Rock! I called Tex and went home ASAP. There was three pieces of equipment delivered, the mower, the power rake and the baler.

There were some issues, the company over sold the mower I wanted so I have a loaner mower, it’s a little smaller and does not condition the grass. It’s cheaper should I decide to keep it. The round baler is smaller and only bales about 90 bales an hour vs 120 on the one we want. The one we want still has to come over on a container by ship from Italy. All of this stuff is made in Italy. We had to keep all the shipping material so that the baler and mower can be shipped back to the company when they send us our mower and baler.

I had visions of just backing up to the equipment with our quick hitch system and hooking up to everything and just putting it in the machine shed. This did not happen, as not a single piece was capable of using the quick connect. I kept trying, finally Tex told me I had to take the quick connect off the tractor and hook directly to the three point hitch.

You can see that it almost wants to do it, it just needs a couple more inches. I took pictures and sent them to the company asking for a fix. What good is a quick connect when you cannot use it? Prior to this round of equipment I had four pieces for the tractor and three of them can use the quick connect. This makes switching out a couple of minutes and that includes parking it in the correct storage spot. Now that we have four more pieces of equipment the quick connect can only work on 3/8 pieces. This is not acceptable. I ordered 8 adjustable pins that I can bolt on myself. They are about 2 inches longer so I will gain 4 inches total. Looking at the pictures I think that four inches is going to be plenty. I also ordered a box of various locking pins to hold the equipment on. The cleaned out machine shed is amazing!! There is still quit a bit of dust but I am hoping that when I get the plywood up on the hay side I can start to contain the dust. I may drag a hose out and wet down the gravel, maybe even spray down the entire inside of the machine shed to give it that once a centennial cleaning.

The old floor scale that Annmarie’s dad got from PGG has all the parts, I really want to install it and put all the pieces together. I will need a level poured concrete pad about 4×6 feet first. Next year I may do it. It shouldn’t be too bad, I can use sacrete and I have the mixer. I can just use a piece of cow panel as the rebar.

Zeke got out of the yard twice this week so Tex and I removed all the old scrap wood and fencing that was leaning up in the corner of the yard. So now there is no ramp for him to use as a launching platform over the fence. I also went and dug down the piles of dirt I had placed near the side fence.. He had a 18 inch launching platform to go over the fence. Since doing that on Friday, he has not been able to get out of the yard a single time. Who knows if it is a lack of opportunity or just an unwillingness to leave. Time will tell.

Dug out again

Steve HardinLeave a comment

When I went to work Wednesday morning I knew the back creek was overflowing. Our front ditch was muddy and four times its normal size. Unfortunately, I had to go to work and could not just stop what I was doing and go up and unblock the jam. So after work I went to the hardware store and picked up a portable handsaw and a pitchfork that has the tines bent 90 degrees. I figured that would work better than a metal rake at getting stuff out of the creek.

I texted Tex to see if he was available but he had homework. Again, you gotta like a guy with priorities. I made a second change, I put on my chest waders! I even remembered to but a belt on the outside of the waders above my waist to prevent water from getting in rapidly and weighing me down. It’s a safety feature that I figured was important since I was working alone. I also got a pair of rubber impregnated gloves that would dry out fast after I was done. I loaded it all up in the pickup and drove to the upper end. No sense in trudging through the mud the entire distance.

The chest waders were a game changer! I finally just waded into the water and started to pull the piles apart with my gloved hands. I was in water up to my stomach. I made sure to stand on the upriver side of the mass so if it broke loose it would not take me downstream. I spent an hour and managed to tear the large blockage in half. Unfortunately, a tree in the stream bed is the reason for the blockage and there is no fix for that in belly high water. I did manage to lower the water level by about 6 inches in that spot which stopped the water from spilling over the sides. So I was successful and did not have to spend all day. It was a pleasant surprise.

The fields are getting water logged but seem to be recovering except for the growing mud spot. I really need to dig out the irrigation ditch as I believe it could catch the overflow, and run it along side the field then dump back into the stream lower down. Unfortunately, there is no way to get any type of powered equipment into the fields currently. On Wednesday I waited for delivery of the new Power Harrow and seeder. It came on a semi-truck. I was supposed to be available for delivery from 1100-1500. I was home by 1115. The delivery driver called me and then dropped off the pallet at 1445. It was prior to the 1500 deadline. I watched a movie and some bad anime waiting for him to show up. I had to run back to work and got back late. I fully expected to be able to back up the tractor to the pallet, using the quick hitch just hook on and go. I don’t know what I was thinking or why I thought easy was going to work. The attachments do not line up with my quick hitch. I had to remove the quick hitch, extend the tension on the rods and hook it all up. Then I could not lift it off the pallets as my adjustable bar needed to be tightened. This takes a stiff rod poked through a hole. I have misplaced my large screwdriver and every piece of metal I stuffed through the hole bent. I fought and swore and had the harrow in the machine shop 1.5 hours later. I moved the thing 30 feet. I read the very thin manual that came with it and learned nothing from it. I had the electronic copies sent to my email and still need to read them. I need to get this thing up and running in the next 2 weeks. If only the weather will cooperate.

New Power Harrow

Tying it all together

Steve HardinLeave a comment

Annmarie was gone for the weekend, this allows me to basically work until I drop. I am not sure its the best plan but I am fairly consistent in its application. She leaves and I spend all day outside just tearing stuff up and cooking things that are not good for me. Now this time I was better about that as last time I made myself sick.

Thing 1 and Thing 2 came out first thing in the morning to help me on Saturday. My ultimate goal was to get the old house torn up and put together today. Since we only got about 80% of one room yesterday It was going to take some concerted effort. I had Thing 1 tear into the old bathroom and Thing 2 and I moved the planer and edger away from the walls so we could tear down the wallpaper and some door trim. The original living room now has the fence and compound radial arm saw.

We tore into the old kitchen next. I handed stuff out. Its easier to just empty the room and filter out what goes back inside. I left the two milk separators and the old washing machine in there. We put the coolers and snow tires in it also. We have three sets of snow tires so we need to check sizes before buying any new ones. I got rid of the handmade fruit dryer. It had a live mouse in it and was made out of plywood and window screens with a fan in the bottom. The mouse got away when it was being carried out to the burn pile. The old bathroom really was a bathroom! We moved the old propane stove from our house over the hole so nothing could get inside. We may use the propane stove to heat this building so we kept it.

The center room had two layers of linoleum on the floor, and the boys tore it out. the floor was brand new underneath. The wood has never been walked on or seen daylight. It is in amazing condition.
There were two doors leaning up against the wall so I used one to cover the opening to the kitchen. Its about two inches too narrow and six inches too short but it covers most of the opening and keeps the dogs out. I found some old mouse poison so I set that out on the shelves of the kitchen. We have cats but obviously they need some help.

The finished main living room no has the saw. The shelves on the right hand side are home to the shop lights until I can get them installed.

This old parts cabinet got moved and cleaned out with 409. I converted it into a place to hold all the screws and nails. I need to see if I can add in some areas for bolts and nuts also. My drawer for that is getting full and its hard to find the part you want. The not well fitting door needed new hinges and I found a coffee can with some used hinges I had picked up at a yard sale a few years back. I knew I would use them at some point. There is a hole on the outside of the house that was an entrance to the rafters. The door fell off and it has been open to the weather since we got back. I need to get a ladder and install a new door in the next couple of weeks. I picked up an old wooden cabinet that is currently stored at Sarah’s that I would like to install on that wall but I need to stop any water from coming inside first.

I had Thing 2 go through all my scrap wood. Any that were shorter than 3′ got tossed out onto the burn pile. I just had to make a decision to let it go. When I get all the storage stuff up into the old chicken coop then I can store more wood in the old house!

I found some cool old knickknacks. I scored three old melamine drawer pulls. They look brand new. I was hoping to find 20 of them but no go. I found a cool old lock and no key and a couple of old cast plates.

As I continued to fill up the old kitchen with antiques that I have no idea what to do with and things that I may need in a couple of years it occurred to me that I should start looking at the old chicken coop. It has a concrete floor and just needs glass to keep the critters and weather out. Once I had the windows in then I could move all this stuff that just needs stored up to that building. I have a bunch of extra windows so now I just need to see about how to make them fit. If I had that storage area then I could really utilize the entire space for my woodshop. I do need to install a door between this tool room and the other two rooms to minimize the dust in the tool room. I plan on ripping out about 50% of the wall between the two main rooms to allow for more working space. I also need to install a new back door. The current one has fallen apart, lost its glass and is held closed with bailing wire. I would like a 32″ door with large window but I will rip out the door casing first to measure the actual door opening. I may be able to get a 34 or 36″ door into the old hole. I decided that it was time to get rid of some of the cast iron I was hoarding. I ended up keeping one Wagner pan and two cast iron teapots. Now I just need to get a small sand blaster to clean them up.

When they were loading up the sheep on Monday a few got away and one of our solar lights by the front gate was a casualty. I managed to find one brand new one stashed on top of a freezer and installed it on the fence.

I stopped to go make lunch and had Thing 1 & 2 keep working on tearing out flooring and wallpaper. I made my famous chicken salad. It is very good. I made 5.5 sandwiches. I was only going to eat 1.5. I brought sandwiches, gatorade and grapes outside as everyone was covered in dust. When I asked how the sandwiches were Thing 2 stated “its okay” then about 30 seconds later he said they were “good” but he only ate one sandwich. Thing 1 ate three sandwiches after asking his brother if he was going to have a second sandwich. So he obviously didn’t care for the chicken salad. Maybe it had too many vegetables in it, I added onion, celery and jalapeño.

One of the things I noticed about working with the brothers is that when they are together I have to be more diligent about keeping them on the straight and narrow. When they are not kept busy they are easily distracted. I just kept barking orders occasionally it seemed to work.

I am trying to talk Sarah into having a yard sale at her house during Pilot Rock community days to offload all the stuff on the tarp. We have more up in the new bathroom area that can go also. I think she is going to do it! I found this old school desk. I like it better than the one we picked up a couple of years ago but I had forgotten about this one.

All of this area will be alfalfa by this time next year we will have gotten our first crop off it. Looking forward to only moving 50# bales.

Hay moving time again

Steve HardinLeave a comment

Mr Consumer has been out helping me again. I have had him on the tractor discing up the two upper fields. I am going to try and level out the middle field as it is pretty uneven and see if I cannot get it flatter so it will be easier to hay next year. I was able to spend a few hours at it one evening this week working until dark. My wife was out of town and so there was no curfew to come inside and relax. It was just the mistress and I for a few hours. The fields are all disced up now and I will spray them this week or the weekend at the latest to keep the weeds knocked down. This will allow us to disc it one more time and then a friend will bring in his big tractor in the fall for a day and condition the field then I can plant alfalfa. I am getting super excited about doing our own hay next year!

I am especially excited after having to pay for hay again this year and moving all the 65-80# bales. These are light compared to the 110# bales we had two years ago. I am too old and those are too heavy. After moving 8 ton in a day I am bushed, beat, exhausted, stick a fork in me done! Our new bales will only be 50#. They will be round, but since we are stacking them in the barn that won’t be a big deal as the walls will keep them from rolling away.

Mr Consumer and I stacked 8 ton yesterday and another 8 ton today. The stack just gets higher every time we bring in more hay. In the barn we can stack the bales 12 high and it is done all by hand. I have the used elevator I got last year but it needs some welding repairs and since I am taking the welding class this fall, all welding projects have been delegated to next year.

We stacked a total of 9 ton in the machine shed over the weekend. We stacked it high in the middle so that I can lay down a couple of sheets of plywood and fix those broken supports in the roof I broke out last year with the old tractor. It will be a lot easier to work on a six foot ladder than a 16 foot ladder.

I will work on getting the lumber to fix those next week. Things are starting to come together. The bull enclosure is my single big project, if I can get that done then I think I can get the barn addition frame work done this summer. I have a few more fences I want to install but honestly its too late to be fencing. I need to do that next spring.

The machine shed gate got hooked by a trailer so I will have to repair that now. I have learned that anything can be repaired and things will go wrong or break all the time. You just keep moving forward and fix them as they come.

I am going to let Mr Consumer unload the trailer while I am at work! I plan on getting a load every evening and letting him unload it the next day. This is by far and away the best way to unload hay!

This is our club wheat crop this year. It is probably the best crop we have had since we have been back to the farm. I will get a shot once it has all turned a golden color.