John Deere tractor

Machine shed miracle

Steve HardinLeave a comment

Tex came out today, after breakfast we went out and started to fill up the pickup with burnables. The burnables are going on a big pile and it is just getting bigger. I worked on getting the second tank off its perch. I made sure to stay out of the way and gently started it rolling. The plan was to keep it on the deck to make it easier to load onto the scrap trailer. It rolled right off the platform and onto the ground.

We just kept moving stuff out and I kept dragging it out to the scrap metal pile. Once we had the tanks out of the shop it was short work to rip out the wooden deck that used to house the fuel tanks. It had the most awesome clear grain6x6 beams and and amazing piece of 3x8x20 foot beam perfectly clear. It made me want to cry as we threw it on the burn pile. All of the wood had fuel, oil, grease or chemicals on it. They had been using it as a storage area forever. I feel better now that it is not in the machine shed. I did manage to hit a nail with my head while we were tearing it apart. I was pretty sure that was gonna leave a mark, it did.

We got two bays totally empty so I started dragging the dirt out with the tractor. I finally had to remove the bucket from the tractor to gain more maneuvering room inside the shop. It looks great!

Unfortunately, moving dirt around has exposed a few problems. Two of the main support beams are rotten on the bottom as the dirt has piled up over the years. We will need to cut off the bottom six inches of two main beams and splice in a new piece. We will also need to fix an overhead broken beam. I am going to have to drag out about 8 inches of dirt on the right side of the machine shed. It looks like when they built the shop they accounted for a natural drainage slope. Over the years the dirt has piled up and that slope is not even any more. I will drag out the extra dirt and take it down to the correct height again. Once we get it all drug out I will order in some 3/4 minus gravel to put into the machine shed. I think 50 cubic yards should do it.

I also found one hole in the concrete wall. I dug out all the loose rock already so I just need to get some sakrete and patch the hole.

Annmarie was busy all day and got the container garden sprinkler system glued together. She has spent evenings and the last two weekends cutting and dry fitting pipe to make sure everything would fit correctly. Twice she came out to the machine shop so Tex or I could untwist a stuck fitting. It is going to be very nice to have this up and going again. As soon as that is done she is going to direct us in setting up the above ground sprinklers for the front hillside. We need those in place so we can start planting. She offered to help with spraying but we only have one tractor and I was using it all day. It doesn’t seem fair to expect her to do tractor work with no tractor.

Fencing fury

Steve HardinLeave a comment

Sunday we decided to start with fencing and hope we could get some parts completed. We went to the fencing supply pile and snagged the last of the railroad ties. My supply pile is getting pretty sparse. I only have one roll of woven wire left, no wooden fence posts and two rolls of smooth wire. We managed to get the last five stood up and my little tractor managed to get them over to the barn lot, but it was not pretty. The chain stretched with the weight of the railroad ties and they went all cattywonkous.

We used the two heaviest ties for the gate crossing the culvert bridge. The tractor was only able to dig those holes about 18″ and I dug the other three feet by hand. It makes for a very sturdy post when it is set in gravel. We are setting all wooden posts in gravel now. They just hold up better and stay stiffer. The gate opening was 16 feet which is a long gate. These gates usually sag so I went into the barn and found one of those wheel attachments and we attached it. I snagged three of them at a yard sale a couple of years ago. This is the first time I have gotten to use one. The real problem came when we tried to attach the gate to the post. We hooked in the bottom part and then swung the gate to see how it moved. Nope, I needed to take some dirt down to make it level.

I spent the next 1.5 hours cutting into the hillside in an attempt to get a level path for the gate. We hand dug it a couple of times and kept marking the path with the gate wheel. I finally had to go dump off the tractor auger and install the box blade. I should have done it an hour earlier.

I spread the dirt out all over the area in an attempt to cover the rock face that keeps trying to jut out of the ground and we made sure the animals can get to water. We also chained the panels together to make sure they stay in place.

As an added bonus we got two solid wood posts installed in the barn lot cross fences and will. Be tightening both of those fences next week. Once we get the culvert and last outer water damaged barn lot fence done next week the entire barn lot will have been redone and should be good for another 7-10 years with just a little repair.

I even got the momma/baby area leveled out. I want to toss out some grass seed this week after work and see if it will grow. Annmarie had me take the dogs out with me as the sheep were mowing our yard. I came inside that evening with a hoarse voice as I had to keep hollering for the dogs to come back or to quit harassing some animal. I even made them stay in place for over an hour a couple of times. It’s good practice for them and they don’t like to do it so it did work out well as a training exercise. My voice is not cut out to holler and swear all day. I am good with that for short periods of time only. We have decided the only dog working videos I can post are sped up and make me sound like a chipmunk. No one can understand what I am saying!

Our current numbers are as follows:

2 death

6 bummers

14 singles (37%)

19 twins (50%)

5 triplets (13%)

38 ewes birthed

57 lambs dosed, tagged and banded

1 lambs to process

Production rate:

Birthed 176%

On our farm and alive 155%.

Dug out again

Steve HardinLeave a comment

When I went to work Wednesday morning I knew the back creek was overflowing. Our front ditch was muddy and four times its normal size. Unfortunately, I had to go to work and could not just stop what I was doing and go up and unblock the jam. So after work I went to the hardware store and picked up a portable handsaw and a pitchfork that has the tines bent 90 degrees. I figured that would work better than a metal rake at getting stuff out of the creek.

I texted Tex to see if he was available but he had homework. Again, you gotta like a guy with priorities. I made a second change, I put on my chest waders! I even remembered to but a belt on the outside of the waders above my waist to prevent water from getting in rapidly and weighing me down. It’s a safety feature that I figured was important since I was working alone. I also got a pair of rubber impregnated gloves that would dry out fast after I was done. I loaded it all up in the pickup and drove to the upper end. No sense in trudging through the mud the entire distance.

The chest waders were a game changer! I finally just waded into the water and started to pull the piles apart with my gloved hands. I was in water up to my stomach. I made sure to stand on the upriver side of the mass so if it broke loose it would not take me downstream. I spent an hour and managed to tear the large blockage in half. Unfortunately, a tree in the stream bed is the reason for the blockage and there is no fix for that in belly high water. I did manage to lower the water level by about 6 inches in that spot which stopped the water from spilling over the sides. So I was successful and did not have to spend all day. It was a pleasant surprise.

The fields are getting water logged but seem to be recovering except for the growing mud spot. I really need to dig out the irrigation ditch as I believe it could catch the overflow, and run it along side the field then dump back into the stream lower down. Unfortunately, there is no way to get any type of powered equipment into the fields currently. On Wednesday I waited for delivery of the new Power Harrow and seeder. It came on a semi-truck. I was supposed to be available for delivery from 1100-1500. I was home by 1115. The delivery driver called me and then dropped off the pallet at 1445. It was prior to the 1500 deadline. I watched a movie and some bad anime waiting for him to show up. I had to run back to work and got back late. I fully expected to be able to back up the tractor to the pallet, using the quick hitch just hook on and go. I don’t know what I was thinking or why I thought easy was going to work. The attachments do not line up with my quick hitch. I had to remove the quick hitch, extend the tension on the rods and hook it all up. Then I could not lift it off the pallets as my adjustable bar needed to be tightened. This takes a stiff rod poked through a hole. I have misplaced my large screwdriver and every piece of metal I stuffed through the hole bent. I fought and swore and had the harrow in the machine shop 1.5 hours later. I moved the thing 30 feet. I read the very thin manual that came with it and learned nothing from it. I had the electronic copies sent to my email and still need to read them. I need to get this thing up and running in the next 2 weeks. If only the weather will cooperate.

New Power Harrow

No schematics necessary

Steve HardinLeave a comment

Tex and I started in on the fencing today with the intention of making great progress. I grabbed a roll of smooth wire and a bucket of gravel with the tractor and headed back to the job site. I started down the path to the bridge on the tractor but I only had the auger on the back of the tractor for counter weight. Next thing I know I am on two wheels of the opposing sides. I dumped the bucket quickly, dropped the wire into the water and managed to get the tractor to fall back onto all four tires. I dumped the gravel off where Tex was working and proceeded to go back and tear into the hillside. My previous path was not level and led me to almost tip sideways. I made sure to keep at it until I had a nice path that was safe to go up and down in the tractor on.

Meathead is going to start helping me so I also created a flat spot up on the hill and we are going to fill it with 200+# rocks. Again I am hoping to keep some dirt on the hillside so we can get some vegetation to grow. I also started digging a trench under the eaves of the roof. Unfortunately, I cannot dig very deep as there is a rock ledge just under the soil. I still managed to get 6-10 inches dug out and now need to fill it with gravel.

Tex managed to get all the posts set in gravel before lunch time. Now we need to make the H braces and start putting up wire. A rain storm started to go through so we called it lunch time. I don’t think Tex would have stopped for a “little bit of rain”. We don’t have rain like Texas.

We got the boards across the spring and just need to start hanging panels. The new crossing does it in a place in the spring where the water bottom is gravel. The old crossing has a 1.5 foot hole running through it. We wanted to avoid trying to block off the hole from sheep.

We added a new gate into the momma area. The sheep always ball up at this end of the pen so we added a gate to allow them to easily leave. I think it will be very helpful to getting them in and out of the barn and sorted. Today we installed one railroad tie, I hung the gate then Tex installed the second post to allow for a good tight fitting gate. This worked very well both times we installed gates today’s.

I found this laying on the ground, protected from predators. I drilled a hole in it and mounted it on the fence. Hopefully, we find the rest of the heads floating around will get them mounted also.

Tex is all ready to go in the morning. We knocked off early so I could spend some time with Annmarie today.

Surprise Lambs!

Steve HardinLeave a comment

I decided after last weekend that I needed to stay ahead of Tex. So every evening this week I went out and moved rocks for an hour. I tossed the rocks over fence so Tex could build a series of rock retaining ledges. I knew I was going to have to work Thursday night so he would need materials prestaged for Friday.

I spent Thursday morning getting more rocks and decided to clean up the Y gate area myself. I have been wanting to do this project for a couple of years but I thought it would take me a day or better to complete. In reality I had it all done in three hours! I managed to find a 600+# rock to anchor one side of the railroad tie. This meant I did not have to try and drive any pipe into the ground. The bigger rocks are actually easier to get with the tractor as they have enough mass to allow you to push them around and manipulate them into the tractor bucket.

It turned out very nice and now the lambs won’t have to work so hard to get up into the barn. As an added side effect the Y gate is easier to move and has a little more clearance. I keep hoping I can get some sort of plant to grow in this back lot, but so far I have had no luck getting anything to grow. I have started to move more soil around and create some retention walls in the hopes that I can get about a foot of soil to stay in place. Once the soil stays I will then try and find something that will sprout and grow fast in the spring then die off in the summer.

Annmarie went out Wednesday morning to let the sheep out of the barn and discovered that one of the yearling ewes had twins! She was surprised at that mother was not on the list of suspected ewes pending birth. She got the momma and both lambs into the momma baby area before I got home. They look good and one of them is a screamer.

When I went to bed Thursday I had rocks piled up and ready for Tex. Some of them ended up in the spring, but most stayed on the hillside. The goal is to create a series of small rock walls then back fill the walls with dirt so I end up with several 1-3 foot wide level areas along the hillside. Once the rocks are in place I will start in on moving some dirt. I am going to use the dirt over by the old blacksmith shop. This serves two purposes, it gets me dirt for the flowerbeds and it lets us sort through the dirt for interesting metal pieces from the blacksmith area. My only real concern is getting a flat on the tractor.

Thursday evening when I went out to feed I checked on the new lambs and one of them was not sitting up. It was all limp so I took it over to the front yard gate and set it in the sun till I was done feeding the cows. Annmarie came home about 5 minutes later and took it inside and started warming it up and feeding it. She had me bring in the selenium paste so she could feed it a supplement and she kept giving it a bottle. It was doing better by the time it got picked up but not great. The other lamb is doing fantastic. It’s hard for first time young ewes to raise twins.

Friday morning, after working all night, I came home to find Tex hard at it. Annmarie had him do the morning chores then I texted him to move more rocks, he dug out a channel for the culvert in the upper barn lot also. I need to go buy one of those culvert joining pieces so I can create a 20 foot piece instead of two 10 foot pieces. But I need to measure it first as I am not sure if it’s 24″ or 20″.

We marked out the spot for all the posts and got the auger mounted on the tractor. I went to bed while Tex kept at it. I did give him a sack lunch with cheese, meat, fruit, tortillas, water and a soda for lunch. Annmarie tells me that is not lunch but I eat that all the time for lunch! I didn’t get any complaints from Tex.

When I woke up I went out and surveyed his work. The rock walls look great! We just need to get some dirt on the hillside now so we can create the flat areas for the flowers. I am super excited to get this done as I like random wildflower beds.

We then finished drilling all the holes in the ground with the tractor. Sometimes the clay makes the auger just sit on the surface and not cut through. So I had Tex use the hand post hole digger to create a small hole in the middle and then I could power through with the tractor auger. This got us all the holes except for the two down by the water. Those required the use of a shovel and a breaker bar. The hole ended up being pretty big after digging out all the big rocks we found embedded in the hillside.

It’s supposed to rain this weekend. The grass looks amazing and we will be letting the sheep up onto the back hillside. They are keeping the upper pasture all eaten down.