Mr Rainman

Danger gazebo project halted

Steve HardinLeave a comment

The platform was all ready and my only goal was to finish the roof over the weekend. We got a ladder tied into the center so that I could manipulate the center ring and bolt the wedges to the ring. It took us over two hours to get the first piece bolted in place. We had to keep jockeying the platform up, forward and back. Nothing seemed to be working so we started to lift the platform even higher, then higher. I had forgotten what it was like to stand on a ladder for hours at a time. You are constantly trying to balance yourself. Well maybe not a normal ladder but one suspended on a shaky platform anchored at the bottom and top so the ladder doesn’t fall off or lean backwards is a little different. On a side note the hydraulics have a very slight leak that is letting the forks drop a couple of inches over 15 minutes. This doesn’t seem like a bunch but when you are trying to line up four 1/4” bolt holes that is a lot of movement. It’s also very hard to move the bucket 1/4”!

So instead of moving the tractor bucket all of the time I started using a three foot span of 2×4 as a lever to move the ring enough to get the holes lined up. Then I started adding shims to hold it into its new spot. This went on for six hours and I only managed to get four panels totally bolted in place and three more up onto the ring. My legs and arms were cramping and the metal pieces were starting to get hot in the sun. It was time to call it a day. We cut four 2×4 and put them under the tractor forks so the platform could not sink overnight.

Today was the day, there are 24 roof wedges and we only had four bolted in and three more up so almost 25%. But we now knew what we were doing and the rest should be easy. Not even. It was discovered that the far end of the ring is sagging a lot. I needed to lift the center ring up another ten inches. I ended up putting ten inches of shimming under the two far sides. Since we had managed to get seven panels up onto the center ring it is incredibly hard to move with all that weight on it. I had Mr Rainman crawl up a ladder on the outside of the gazebo to reach out with a tape measure we need 108” for a roof panel, we were at 94”. I was hollering at him to take it easy crawling up the side of the gazebo as it was causing the entire platform to shimmy and shake in the air. There was no way I was going to be able to shim another foot. Not without causing the platform and all that metal crushing down on me. It was officially not Steve safe. OSHA and I have pretty drastic differences when it comes to safety but I do have some standards. I do own two roof harnesses. But no way am I going to finish this project this way.

I need a crane and a scissor lift to get the roof on safely. Using those two pieces of equipment I think we can get it done in 16 hours. So a two day rental should be enough to get it done. Now I have to find a crane and scissor lift and get them delivered to the farm. We will use the crane to grab the center ring, lift up 10 inches and then tear down the entire platform. Once the platform is torn down we will be able to drive the tractor out of the center of the gazebo and drive in the scissor lift. This will mean the tractor will be trapped in the front yard until we are done. Not really a big deal as the tractor is currently stuck holding up the platform now.

Unfortunately, this is going to add to the total price of the gazebo. But that cannot be helped. Those six weeks doing nothing with a broken foot did not do my fitness level any good. Plus, I am just starting to be able to get back into some hard manual labor without petering out in a couple of hours. I do not want to fall or have something fall on me and take me out for months or a year. I will call a couple of rental agencies on Tuesday.

Stuck. Need more equipment

Predators 6, Farm 8

Steve Hardin1 Comment

The sheep are still giving birth one at a time on the occasional day. The one a day trickle is very annoying. We are only two weeks into this birthing process. The rams only had eight weeks with the herd so we should only have about 8 weeks left as we should take into account any late births.

Newborn about two hours old

I lost more chickens again to the raccoons. The weird part is they did not kill them at night. They came up the dry creek bottom and killed them in the morning, three chickens gone. Mr Rainman managed to shoot at one as they were running away. They have not returned but since there was no body we don’t get to count them on the predator dispatch count. Otherwise, it would be artificially inflated! The predators are coming in closer to the barn and house. I had two lamb corpses to go up to the boneyard that I had placed over the fence. Mr Rainman went to take them up to the boneyard the next day and the coyotes had come down to the gate and taken them. There were no bodies. We use woven fence to keep the sheep in but it also helps keep the coyotes out. They usually have to dig under the fence to get past it. This is why it is recommended that you run a single strand of barb wire at the ground level on a sheep pasture fence. I don’t do this but it is the recommendation. I usually just fill in the hole but after losing so many sheep last year I put a snare in the crossing now.

Last night when the progeny was returning home after dark she spotted a possum leaving the mother-in-law’s back yard. The Gingerman jumped out and dispatched the possum. I had been noticing a steady decline in eggs recently and figured there was a possum around. They will sneak into the coop during the day and eat the eggs. They rarely kill the chickens but they love the eggs! They are super hard to get rid of because we are gone during the day usually or out and about on the farm.

It is dove season now so we are starting to thin out the doves. There are over a 100 now on the place and they are competing with the quail. We like the quail over all other birds and have worked for the last 20 years to protect and grow them. There are several coveys on the farm but we won’t know how many are on the place until it starts getting cold and they all come down to the houses to winter over. They know where the easy food is located. Hopefully, the population is over a 200. It waxes and wanes pretty significantly. We have had as few as 30 and over 200 over the years. The last few years we have managed to keep over 100 at any time on the place. But this is the most doves we have ever had on the place. Only about 25% of them are the ring neck version. These are invasive and quite a bit larger than the native doves.

We are now seeing bunny rabbits on a regular basis but still only seeing one at a time and only in a couple of places on the farm. They are the dwarf bunnies native to Oregon. I think the owls and hawks love rabbit and they just cannot reproduce fast enough to get ahead of the depredation. They are maintaining a small population.

Cow hay now on the farm

Steve HardinLeave a comment

It never fails, when I need to do anything with the hay it always rains. Labor Day was no different, just as I was finishing up transporting the last load to the farm it started to rain! This is great timing as it is going to sit out for a week until it can be loaded into the machine shed.

I have been trying to get last years big bale discards from a source all summer long. It was going to be discounted and I wanted enough that I was hoping to have it delivered. This did not work out at all. Annmarie has been “reminding” me all summer that the cows need hay for the winter and I am being a cheapskate. There is nothing wrong with being a cheapskate when possible but she was right it was getting late in the season to be buying hay. The real problem with buying hay is I only have a 7500# 16’ bumper pull trailer. So I can only fit four large bales at a time on it which causes problems when you want to pickup 60 bales of hay.

Normally, I purchase all of my hay from Bluview Farms. I always wait until September to purchase it. So I went with this option again as it fits the bill nicely. They are only four miles from where we live so I can take an entire day and just run back and forth with four large bales at a time. Unfortunately, they are selling their farm and moving which is going to cause me issues next year. I really need two semi truck loads delivered. The second problem is that I do not have a tractor large enough to unload the hay and restack it. I am not buying a third tractor to use once a year. The third problem is our old pickup may not be able to haul a large gooseneck trailer if I have to pickup the hay myself.

So that being said Mr Gingerman is coming over today to stack all of the large bales into the machine shed. I think we can get 50 bales, stacked four high in the hay storage area. I can toss a chain around them and pull them down with the little tractor. Once they are down my new Kubota 3301 can lift a bale about 4-6” off the ground and I can drive it anywhere on the property fairly easily. This is much better than pushing it along the ground which is only what the little John Deere 2520 can accomplish. Mind you, I have fed the cows large bales almost exclusively but I keep hoping to make it easier.

What does this mean? I need to find a source of hay that can deliver it by the semi load and unload and stack it into the machine shed or I need to purchase a larger pickup and trailer so that I can haul 10-14 bales at a time. Fortunately, I was able to pickup a F350 Diesel this week for a steal. Again, the Dodge 10 cylinder is a beast but it is starting to show its years and it has 180k miles on it. I just purchased tires for it at the beginning of summer but they are the same size as the new Ford so I will get them swapped out. The Dodge is rough on the exterior and rough on the interior, a true farm vehicle. Once I get the tires swapped I will be offering it up for sale, cheap!

I have the new truck, now I may need a new trailer, gooseneck. I do not want anything fancy. I want it very functional and capable of hauling a lot of weight. I can even rewire the lights and brakes if necessary. So if you know of anything “cheap” let me know I would appreciate it.

Summer 2024 Lamb Productivity

Steve HardinLeave a comment

Well summer lambing started on August 15 2024. In the last 18 days we have had 12 ewes give birth. It has not gone smoothly, as it is summer. Surprisingly, having lambs in the dead of winter is easier. The sheep are all in the barn and tend to deliver in the middle of the night almost without fail. We can then catch them, put them in jugs and leave them to bond for 2-3 days. This is not possible in the summer. For one, they don’t always give birth at night, about 30% of the lambs have been born during the day. The lambs are pretty dang spry by the time we get out there to put everyone in for the night. Which means you cannot always catch them. The space we put them in is very large compared to the amount of space they have in the barn. They are just dumber in the summer.

The stats are not very good but they are the facts so here they are:

  • Date of update- Sept 3 2024
  • # of Lambs born – 16
  • # of ewes who have delivered babies – 12
  • # of ewes still pregnant – No clue, I think between 23-33 but I am guessing
  • # of single lamb births – 8
  • # of twin lamb births – 4
  • # of triplet lamb births – 0
  • # tagged male (weathers-neutered) lambs-none yet
  • # tagged female lambs- none yet
  • # of bummer lambs – 1
  • # of lambs who died in first two weeks – 3
  • Total # of lambs on farm -12
  • % birthing rate- 133%
  • % production rate -100%
  • % survival rate at birth – 100%
  • % survival rate at 2 weeks (bummers count as death as they need help and leave the farm) – 75%

Mr Rainman finished digging out the barn today. I put straw in the momma/baby area and opened it up so the sheep could go into that little area of the barn. They can shelter in the barn or over in the lamb shed. For the most part they sneak in with the horse, help her eat her hay and let her watch their babies. She likes the lambs and is very careful with them.

We went to take a couple of dead lambs up to the boneyard Monday morning and they were gone! Annmarie had us out at bedtime looking for coyotes as she could hear them. They were up in field one at the far end of the property. They came all the way down to the barn lot but did not get into the actual barn lot. The corpses were outside the barn lot. We, of course, have not seen a coyote in weeks. We have not lost a sheep that we know of yet this year. There is a skeleton in the orchard but it’s down in a hole and it was all bones. Mr Rainman swears it is new. We had so many deaths last year I am not sure we found them all. So I am not counting it as a loss for this year. We only kept the rams in with the ewes for 8 weeks so we should only have six weeks of lambing left!

Gazebo moving along

Steve HardinLeave a comment

The grain bin gazebo is starting to come together. I as usual did not watch any videos, ask anyone and spent 10 minutes looking at pictures on the internet as a precursor to building said gazebo. The guy I purchased the parts from told me it was the bottom 10 feet of a 20 foot grain bin, he gave me two tubs of bolts and nuts, four floor anchors, a pile of roof anchors, a door, the roof parts and central roof ring. Supposedly the only thing missing was the vent cap for the roof. This was promptly unloaded and ignored for two years.

Well, let me say that it is definitely the bottom half due to how heavy the pieces are. We did not get enough pieces to go to ten feet, only eight feet and if we put up a full ring for the roof then you would have hit your head every time you went in and out of the gazebo. We could have cut one of the upper panels but then I was afraid it would weaken the roof. The bottom line was after talking with the boss, wife, we opened up enough of the gazebo to have a full six pieces to go around the entire top and to get the gazebo sides over ten feet into the air. It’s actually about ten feet six inches high now at the walls with the roof I think it will be another 4-5 feet higher.

This morning I decided to do a little research on how to put the roof together. Yeah, I was better off not knowing. They used a crane, built the roof and then stood on the ground and proceeded to add a row of panels and lift up the entire grain bin as they built it. No ladders needed! The only drawback for me is that I don’t own a crane. Instead we used the trusty Kubota with the forks on it, a chain and some Vice-grips to hold the chain at the far end of the forks. This worked to get the third and fourth row in place. The fourth row was the worst. We ended up having to drill out three holes that we just could not get lined up, they were off by about 1/8” and the entire rest of the panel was already bolted together.

Mr Rainman came over Friday morning and we got the three panels up on the high back wall. It was a battle to get them bent into shape, another problem with not putting them back on in the exact order they were removed. I put up the last three rings myself with the Kubota being my trusty partner. At no point did I fall. I did tear my finger away from one of my fingernails enough to make it bleed and discovered a metal sliver in my finger this morning. The bolts had to be put on between the panel and the wooden support posts and this was an incredibly tight fit. Putting the posts 1/2” from the metal and then adding bolts meant some of the bolts are touching the posts. This is a good thing when I screwed in the lag bolt anchors.

The trusty Kubota is not going to be able to lift the center ring for the roof. It will only lift something about eight feet into the air. I am going to bolt two ten foot 6×6 posts to the upright frame of the forks resting each one on a fork. But first I am going to get a stout wooden pallet. This will let me put a diagonal support out to the front of the forks. I will then build a small open box with 45 degree supports at the top for the posts. This is where the roof ring will sit. I can then lift it up and get it centered with the tractor and then assemble the roof. I think this will work. No, I am confident this will work!

I just have to figure out how the roof support pieces go onto the sides…