Mr Rainman

Getting caught up

Steve HardinLeave a comment

I spent most of the day just puttering around doing little things. Sometimes it seems like I don’t do much on those days but it all needs to be done eventually. I watered our three new fruit trees, two apricots and a peach tree. They are still in buckets and I will get them in the ground next week. They are all blooming so I will have to pick off the fruit as soon as it shows up. I don’t want them to produce fruit this first year, I want them to grow and spread their roots.

We had already moved our chive plant up to the front porch entrance pots. I split it in half so we could have some in each pot. So today I split our edible creeping thyme into two bunches and put it around the base of the chives. We would like the thyme to grow over the side of the pots. The thyme was in an old half wine barrel in the back garden area. When we moved the barrel the entire back is rotted out so it needs to go away. We will use the soil in the other garden planters then I can burn the rotten barrel. Both planters got a good soaking with water to start them on their way.

I dug thistles on the front hillside. Since we are trying to establish clover we cannot use any type of herbicide on the hillside. So all thistles are dug with a shovel. This took quite a while to get done. As soon as I finished that I went and cut ends for our tomato enclosures. Annmarie wanted panels on the end to keep the cats out so she could plant basil plants between the tomato plants. I almost found enough clips to hold them in place correctly. I need four more small clips. Now that I think about it there may be four out in the old house. I will have to check sometime.

I have been slowly working on the Bell! I run the wire brush over it to clean up the rust then hit it with some Rustoleum spray paint. I have been doing this for over a year. Today I decided to just hit it and make some solid progress. Mr Rainman and I had lifted the bell off its stand a couple of weeks ago so I had a lot better access to the bell. I got both uprights sanded and painted. I ran out of dark blue spray paint so now it is a bright blue. I went over to the old house and found eight more cans of spray paint so I figured the bell was getting whatever color I had on hand. I was able to break loose the bolts holding the ringer gear onto the bell. I cleaned the bolts up and ran the threads over their entire length to make sure I could tighten them on the reassembly. I then worked on the ringer gear and got it all cleaned up. I am not going to paint the bolts until I get them on the bell. I think another two hours and I will have the entire bell body cleaned up and painted. Once that is done I will need to make a new wooden base for the bell. Then I need to buy four 2x8x20’ boards and I can mount the bell in the upper portion of the hay side of the machine shed. This will keep it totally out of the weather.

Since the Gingerman got the Little Dumper running yesterday I figured I had better do my part. I went over to look at the door rubber seals. I ended up having to grind down some rusted screws holding a metal plate to the bottom of the door. It was just one solid horizontal piece of rust. I was able to grind the tops off and pry the metal piece off. I then had to grind down the screws until they were flush and smooth before installing the new rubber seal. I managed to get the seal on and only had to cut about one inch out of the bottom middle and use seal glue to put the gasket back together. I tried to take the screws out of the door so I can gain access to the window but there was one screw I could not budge. I will need to spray some penetrating oil on it and hope I can budge it next week.

I have all of the door seals and the front and back window seals. The front window seal needs to replaced ASAP. It is torn and has multiple holes in it. The rear window seal looks great but since I have a new one I might as well replace the old. I did try and latch the passenger door but it would not seal tightly. One more thing to adjust and repair on the old truck. I suspect the rotating mechanism is not rotating! I know, it took a pure genius to figure that out. When I get the panel off to get at the window I will be able to get at the door lock/handle mechanism at the same time.

Mud room 99% done

Steve HardinLeave a comment

We are now using it officially. There are two little things left to complete the entire job and honestly they are going to wait. I need to trim out the window and I need to add another outlet on the other side of the door. Both of those things are not a rush and the power thing requires me to kill power to the entire house/old house out at the pole in the front yard. So no one can be home when I do that. Mr Rainman got the shelf wood supports installed and the short side shelves installed. We had to wait for the metal brackets to arrive before the shelves over the doors could be placed. Luckily, the brackets came with both long and short screws so I did not have to make a special trip to town to get short black screws that go directly into the shelf. I bought too much cedar closet lining. I was thinking it would go on both walls but after installing it on one side the smell was pretty overpowering so I decided one side was good enough. I am ordering a little UV light bug trap also and will give that a try and see if we cannot keep the bugs under control. We built a custom shelf for the new food dryer from leftover wood scraps. I had to adjust the lumen output on the overhead light from 3400 lumen to 5200. The shelves cut down on the light but using a 1×2’ LED light has made all the difference. The room is not dark. Yesterday, I got all of the metal supports and last two shelves installed.

I spent today finishing emptying out the laundry room and moving all of the raw alpaca fiber bins out to the mud room. There are still a couple of pair of boots but the laundry room is fairly empty now. It is quite nice and now needs a deep clean! I ordered a couple of rubber shoe mats and a foot stool so you can sit down if you need to put your shoes on. Not necessary for rubbers but if we have to break out the snow boots you definitely need a place to sit down to lace them up. I ordered an extension cord today for the dryer also, the cord was too short to get to the outlet.

Mr Rainman had a good idea, he said to buy bagged pea gravel to fill in the old planter spots. It’s washed and we probably only need 6-8 bags. It will be easy to move and easy to install. As soon as the local stores start selling their spring yard stuff I will get some. I also need to get some stepping stones so that Annmarie can get to the cat shelf in her socks. Now you have to cross six feet of sharp gravel to feed the cats. We used to just toss it on the back porch! It is the one downfall to the mud room, you cannot just open the door and feed the outside cats. It is a small price to pay for the mud room. I love it!

Mud room guy finished 90%

Steve HardinLeave a comment

Well, Mr Rainman and I managed to knock out most of the mud room in the last two weekends. We are at the stage that I dread the most, the last ten percent. It will take an entire weekend just to get that last 10% finished. It cost about $45/sqft in materials to get the three walls, insulation, exterior door, one small window, and three types of interior lining basically just over $4k for a mud room that I installed with help. I cannot imagine building a house in this day and age from the ground up. My suggestion would be to find a house with good bones and do the work yourself.

I decided to go with smooth plywood on the short sides of the room and we just used some scrap tongue and groove to finish off the top. The back wall has all blue pine tongue and groove. I really do like the stuff but at $10/ea for a 1×6”x8’ board it doesn’t take long to add up when covering a wall. I went through about 80% of the wood pile to find 29 pieces that were worth the ten bucks. Unfortunately, the store won’t bring out more material until someone buys all the crud. I had to go to another store and ended up with white pine in two different patterns. Of course we did not realize that the pattern had changed until we were 60% done and there was only 90 minutes left of work. I just told Mr Rainman that we would be the only ones that noticed it because we had uses different patterns on all the walls so no one would be able to tell that we did not deliberately do it that way.

He talked me into doing a white wash treatment on the wood to protect it, transmit the light and let the wood grain show through. I have never done this before so I am interested to see how it turns out. I also have 60 sqft of cedar closet lining. So once I get the walls all whitewashed I am going to install cedar lining on the two plywood walls. This should help us cut down on bugs and moths. The room is on hold this week as I will need to get outside and work on pruning our fruit trees. The weather is screwy and it keeps changing, 20F-60F in Jan-Feb, it’s not normal. So I need to get fruit trees because it might be 70F in March.

We found a contractor to tear off our vinyl siding, replace three windows and install Diamond Kote siding. The siding should outlive us and the weather should not affect it as much as our vinyl siding. The siding does not have to be painted. It’s a crazy amount of money to do that, more than we paid for our first ever house 30 years ago, just for siding. The job is just too big for me to do in a summer while I am holding down a full time job and trying to work on the farm. It is not possible to do all things, some things have to be farmed out.

We are going to have to get another 16’ of ice breaker stops installed on the front roof of the house. We had a fairly large chunk of ice fall and smash into our new porch railing. It shattered one side of the TREX railing. So that is on the list to replace this summer. It’s always something, the gutters have made a huge impact across the front of the house. The ice breakers worked amazing on the side of the house this winter. Even the black plastic moisture barrier we installed under the house is making a huge difference. We have used about 50% less propane to heat the house this winter. At this rate paying for insulation to install under the floors, our investment might be realized in just one winter. If we continue to use this little propane then I want to add insulating under the house to the summer projects list along with installing the gazebo and getting the man cave closed in. Just a few things to knock out this summer along with hay and weeds and mowing.

I have to say that anyone can really learn to do most things by watching YouTube! I had a couple of install questions on the door and window with the house wrap and I was able to find the answers fairly easily. Watch one, do one, teach one!

We are going to leave the concrete floor for a while. I would like to tile it eventually but it is a mud room and we need it for that reason so the concrete is appropriate.

Mud room progressing

Steve HardinLeave a comment

Mr Rainman stopped at the lumber store on his way out this morning so we would have enough lumber to finish up the walls. We had to frame in the door opening to the rough dimensions on the door receipt. I kept the receipt as it did have the needed dimensions and so that I could argue with Home Depot in six weeks when my door is not in yet.

We had to finish the door opening and the frame above the door. The door is 34” so that caused some problems framing the door, we got it worked out. The hard part was the corners. Each corner is an old iron pipe with 6” square 1/4” thick ends and then bolted to the concrete and the porch. The real problem is the pipe is welded in different spots on each end and neither pipe is identical. We had to try and frame around the pipes to get the corners stiffened. This was not easy and we kind of had to piece things together where the wood would actually fit.

When we went out to the barn this morning I tagged and banded the last pair in a jug. It was a little boy and he had pasty butt! The new momma was not keeping him cleaned up and it had frozen to his hair. It was a mess, I got it cleaned enough for him to poop. But it needs to get above freezing so I can get it out of his hair. We may have to bring him inside and get it all cleaned up. I will keep an eye on him. I had to do the same thing again this evening.

It did rain off and on throughout the day and we are under an ice advisory. You can see how the snow is turning into one big ice sheet with water on top. I finally had to start locking the dogs into the laundry room. The puppy’s injured foot was getting scraped up on the ice edges when her foot broke though the ice covered snow and she was leaving blood on the ice. She did not like not being outside while I was outside. It’s supposed to warm up so flooding may be a thing before the week is out.

Mr Rainman and I then worked on getting the plywood sheeting up onto the frame. As things started to get closed in I was able to really see how big the room was going to be and start thinking about what needed to happen on the inside. I think another $1k by the time I buy insulation, sealant and 12 more sheets of plywood with one smooth side. That doesn’t include sealing the plywood or building the countertop, bench stool and two open fronted shelving units. I think we will be into it about $4500 by the time we are all done with it.

It’s kinda warm

Steve Hardin1 Comment

Well it has been a long week. Since the tractor cannot be started I have been feeding the cows by hand. After pitchforking 400# of hay into the back of the pickup and then out again for the cows and after working ten hours and getting up at 0345 to go out first thing in the morning to take care of the sheep and lambs; I gave up.

I had a space heater going under the tractor with a canvas tarp over it. I put hotshot in the fuel tank and in the fuel filter and still cannot get the tractor to stay running. I have been trying every day, sometimes twice a day with no success. I went out one dark cold evening late this week in an ice storm and opened the gate to the hay pile. I went out threw pallets out of the way and cut away the tarp covering the front of the pile. It was weighed down with so much snow I could not pull it away. I cut the strings on two large bales and just let the cows have free range on the hay. I do realize this is not the ideal answer but it is my answer. It means the cows get to eat in this bitter cold and deep snow without me killing myself to feed them. I also have time to do other things.

We have a lot of cold, ice, snow and general hard to get around or get anything delivered weather going on now. I got my car stuck in the snow near my mother’s house in Pilot Rock. One of our nephews came and pulled me up a slight incline that allowed me to basically run my car into the deep snow in her driveway until it got stuck. My mother was worried because I did not lock the car up. I told her there was no way they could steal the car, it was stuck in the snow and until I get new tires it was not going anywhere. Annmarie had told me to invest in some new tires a few months ago, I failed to listen and will now be driving the pickup. Except the pickup defroster is kinda wimpy so if its an ice storm I am just stuck at home. I have a brand new snow plow for the tractor that should be in use but since the tractor is down it is still just sitting there! I will definitely remember to treat the diesel in the fall so this never happens again.

The puppy is trying to wear me down. She punctured a hole in her ankle above her paw. We tried to get it healed on our own then had to take her to the vet. The course of antibiotics has helped drastically. The vet told us the cone of shame was needed at all times. Well when it is 2 F outside the puppy uses the cone to beat and thrash on any hard object within reach. I have resorted to duct taping the cone back together. So far I have almost a half a roll of duct tape used to keep it together. She has managed to split it in half twice already. I have 1.5 rolls of duct tape left, I will win.

The chickens don’t really like the cold. But more importantly the starlings really don’t like the snow. We have about 50 starlings in the chicken coop now. It’s a mess, they are eating and pooping everywhere. Now I have holes in the screens and one wall paneling is coming down and I believe there is one hole to the outside eave that is also letting them in and out. We have had subzero temperature for over a week so every night I have to shoulder open the door then chip the pile of frozen bird poop away from behind the door. If I do not do this every day I cannot get into the coop. It took me over 10 minutes one evening and I almost broke the door down. I am focusing on the mud room and the starlings are getting a pass for one more week.

Mr Rainman came out today and we worked on getting the mud room walls up and the pressure treated boards down. Unfortunately, none of the walls are square so each individual upright had to be cut a different length. Over a distance of seven feet the height changed by over an inch on both sides! We are building around the two steel upright pipes that hold the roof up. Those are not even welded straight, so it has caused some interesting adjustments to be made. I have no clue when the door will be in, they are supposed to contact me and said it could take 4-6 weeks and since no shipping company has hardly moved anything in the last week we can just add some more time to the arrival date. The hope is we can get the mud room sheeted and the window installed tomorrow. We will see if the weather cooperates. It was not horrible working in 20 F weather, not great but still doable.