Actual tiling has begun.

I did it I actually started laying tile down onto the floor. I remembered why I normally buy premixed mastic, it’s so very painful to mix by hand. I made it a little thick and it kept trying to dry out. I totally did this backward!!  I should have started in the middle of the room but if I do that I stand a good chance of screwing up the spacing in the hallway. So I started at the narrow entrance to the room. I tried cutting the first few pieces after mixing the mastic but it was slowing me down and allowing the mastic to dry out. 
Sarah stopped by so I had her stir mastic and hand me tiles. I am done for tonight. I should be able to do most of the room tomorrow down to the closets and a 2 foot section along the wall. This will let me get out of the room without stepping on any newly laid tile. I will need to do a third day to finish off the edges and closet. 
I actually really like the look and am looking forward to getting it completed.  
 
I had to go into work briefly this morning to sign time cards. I saw the full moon sitting on a cloud. It was very nice. Those views make me miss flying around in the helicopter. Coming home every night and going to bed with the wife makes me appreciate my current job. 

 

Babies current as of today


 
It was tag and band day Sunday. My nephew volunteered to come out and help me and the weather was finally cooperating. I truly did not want to roll around on the ground in four inches of mud with the calves. While trying to get them tagged and banded. We were going to start out the day by digging channels for the sorting chutes in the barn but there was a ewe in there with brand new twins and she was trying to pass the afterbirth so we opted to do cows first. Their is a convoluted order to everything that has to be followed. First, we had to push the sheep and horses out of the barn lot and into the upper prime pasture. Secondly, we needed to put the alpaca back into the orchard and shut the gate so we can run the cows through the front part of the property. The dogs did very well and stayed where put until we had walked the alpacas to where they needed to go. Next we went into the lower pasture and shut the gate going down to the schoolhouse pasture. The dogs were running all over and not paying attention. It went downhill from there. Mouse would not listen!!  I should have brought our 30 foot lead rope. I was screaming and swearing with minimal effect. The cows did not go through the open gate by Donna’s house. Instead they went all the way along the hillside behind our house. We then opened the gate into the barn lot pasture and Zeke pushed the cows while the rest of us kept them from running back down the hillside. They went into the barn lot fairly easily. Now this ended up being a better plan for moving the cows but Mouse doesn’t get credit for this despite it being his fault. 
We used the dogs to push the cows into the backside barn lot. There was one cow that just would not go. I finally sicced  the dogs on her. She came pretty close to kicking both dogs a couple of times. After about 30 seconds I called the dogs off and they did come back, miraculously then she ran for the gate and went in with the rest of the cows. It’s hard to defend yourself when one dog goes for your nose and the other your tail or back ankle and they switch every time you turn. Occasionally, it is good for the dogs and cows to realize who is boss, me. Everyone just needs to do what they are supposed to and all will go well. We locked the dogs in the hay room of the barn and sorted out cows. It only took us about ten minutes to get all three calves isolated into one pen in the corral. Heath grabbed the smallest calf, a little boy and we tagged and banded him.  The next calf was the middle sized one another boy who was tagged and banded. His testicles were big enough I had to squeeze one at a time through the rubberband opening. This one was not as easy and we both got peed on. The third one was another boy and the largest of the group. Heath grabbed him around the neck and wrapped his legs around him and pulled it down. He couldn’t pin it but it wasn’t going any where. I piled on and we rolled it onto its side, another boy!  Something was wrong in whoville, the largest calf had a scrotal sack the size of a peanut. No testicles present and I had to really search for them. I only ever found one despite repositioning the calf. It was about six inches toward its head under the skin, no where near a scrotum. We left it and tagged it in the right ear. All our tags usually go in the left ear. This way we know something is off with it. We then ran them out onto the back hillside with the dogs. The dogs were not listening well. My voice is already starting to crack a little from the yelling at this point. 

 

We then had to go into the barn and dig down into the straw and create paths to lay the panels down onto to create sorting pens and pathways. This took almost an hour for us to get all ready for the sheep. We had to tag and band the two newborns as they would not leave the barn, one was a boy the other a girl. Once the barn was ready we realized that the sheep would have to be ran in through the shoot. Normally we just push them into the barn and move the panels into place but after digging the trenches this was not possible. We had to push them into the barn on three different groups, shut the barn doors then get them all to go through the chute to the pen in the back of the barn. We got it done. I had to put Mouse on a fencepost tied with bailing twine. He went after one of the new mommas after she stared him down. He took offense and tried to jump on her. I called him off then made him stay in one place while we worked. He did not like that. Then when we had everyone in the barn I brought him in and tied him up to a sheep feeder. I eventually had to tie Zeke up also as he kept trying to help when we moved the boy sheep past him. 
I like to keep the dogs present as it helps them get used to the excitement and jostling of the animals. We kept taking every boy who was weaned off of the main herd and tossing them into the back barn lot including the ram. We are going to give the sheep a three month breather to allow everyone to get fat and hopefully synchronize the ewes so the lambs come all at once. We ended up with 26 big boys, 11 baby boys, 46 ewes and 4 baby girls for a total of 87 sheep. There are at least 10 more pregnant ewes getting ready to deliver so we should get at least another 15 babies for a total just over 100. We want to keep the ram and 30 ewes. This will leave us selling 70 animals all at once. In three months we will take pictures and post them on Craigslist for one buyer to take them all. We will cull out 16 ewes and replace them with some of our last years lambs. 
Our best luck has been with selling large flocks all at once. There are buyers with a ready market who want a bunch of animals all at once. So that is going to be our target market. Hopefully we have success. 
Once we pushed the ewes and babies back into the upper prime pasture we moved all the boys onto the back hillside. After Zeke failed to turn the herd twice because he was playing instead of working I had to put him on the leash and work Mouse off of it. We finally got all the boys onto the back hillside. 
It was lunch time!  Chili and weiners!!  A manly meal. Back outside to open all the gates and reset the barn panels to their normal nonsorting pattern. It took about six hours to do all this. 
I also fixed one gate that was dragging on the ground before coming inside, showering and taking a 2.5 hour nap!!
I pity the person who will be digging out the barn. I am going to have them toss straw out the front and back door in an attempt to minimize the travel distance to an exit. Hopefully, this will help speed things up. 
We had to go out in the evening to make sure all the babies had come into the barn and weren’t still hiding in the upper prime pasture. There were no holdouts. 
One whether is biding his time in the corral waiting for his new owner to come get him this week. The corral is too short at 5 feet. We had one sheep jump out yesterday so I need to add at least one more railing. It’s crazy how high they can go when motivated. 
 

 

Almost ready to tile.

I spent all day yesterday on my knees. I have to say that it would not have been possible without my gel filled knee pads. I spent six hours on my knees and have no pain or any issues with my knees. It is amazing. Do I need to thank NASA for the technology? Because it is well deserved whomever is responsible! 

I got the subfloor laid in both closets. This took much longer than I anticipated. The corners and cuts were complicated and I did them all with a razor and no saw. 

Once it was installed I needed to figure out how lay the tile such that it went across the hall in the proper fashion. The hallway is 50 inches wide and the tile is only 6 inches wide so it leaves a 2 inch gap or 1 inch on each side with a 3/8 inch gap on each end. So I opted to leave the 1.5 inches on one side. I don’t want two 3/4 inch wide pieces on each side. Too easy to mess up the cutting or installing. I had to measure it all out by laying the tile on the floor and drawing on the floor with a permanent marker. Once I had the starting line I needed another parallel line 18 inches so I can alternate each tile. 
The next step is to get my tile saw set up on the back porch and a few more tools and I am ready to start laying tile. I have to do it over the course of three days because I have to be able to get out of the room and I have to work from the hallway mark so I don’t get my hallway alignment messed up. It complicates things but it just means short intervals of tiling and I will go all the way to the wall. Usually, I do the center part then let it dry and cut all the edge pieces and install them the next day.  This time I will complete whole sections. 
We are going to go order grout this week. I forgot to buy it. You can see my two parallel lines in the picture below. 
 

 

It is happening

 
The border collies are trying very hard to be in every picture I take now. I have given up on trying to move them out of the frame. Sunday was the day it started. I am officially beginning the library flooring project. I had a few odd facts to share about day one subfloor installation.  It takes 56 screws to attach a single 3×5 ft piece of concrete board to the floor, this is a lot of screws. Installing this many screws would be harder if I didn’t use an impact driver.  I broke three driver bits, this was made possible by my use of an impact driver. I was afraid I would run out of driver bits as there is only one per bucket of screws and I only had four buckets.  I went out to the old house and dug around until I found every driver bit to fit the square headed screws.  I found 14 bits that would work and brought every one into the house. I can use the impact driver without fear of running out soon. 

I want to send a heartfelt thank you to the manufacturer of gel filled knee pads. This job would not have been possible without the knee pads. I finally gave up on screwing down new sheets when I started to get a blister on my palm. I did try to use my left hand only but it is so awkward I had to go back to the right hand. 

The weather is amazing. We are talking about planting a garden but want it to be above freezing.  This morning early it was at 30 degrees F. Still not quite warm enough. 

  

Spring is really going to happen

I had a directive to get the subfloor inside installed so I could start laying tile inside the house. It was a good plan and one I was going to follow. It started out slow as I slept in till 0630 as I was sore from the previous days digging. While I slept AnnMarie started our taxes. So when I woke up she wanted me to re figure how our money was spent on the farm. It seems that my tracking of expenses and income vary wildly from the IRS. So the numbers had to be all added up again. While doing this Donna stopped by to say the neighbors bulls were out in our lower wheat field. So the dogs went with us to run the bulls back across the road and into their pasture. We called the neighbor first. As we were walking down the fence line we spotted this deer carcass trapped in the fence. It’s a young deer that got its rear leg stuck. I could not get it loose and will need to come back with wire cutters and cut it out and repair the fence. It made us a little sad and we would have cut it loose this winter had we seen it. The bulls went back with very little effort. The dogs did not get to chase them at all. Their mere presence had the bulls moving where they needed to go. 
 
A friend brought a dump trailer over to get some old sheep manure loaded up. He left the trailer and vehicle so I could fill it sometime today. The problem was another friend from my old job came out and we talked and spent a couple of hours catching up and drinking coffee. He mowed our front lawn while I loaded the trailer. I got an EMS call and had to leave for a couple of hours. When I got back I finished loading the trailer and then scraped the area down over by the lamb shed so I would be ready to finish the gate and fencing arrangement. I do realize I am not fencing but this was preventing us from opening the currently installed gate more than half way open.  I also piled the compost pile back up into a tall pile again. This lets more moisture into the pile and helps break everything down. If I could pump water into the compost piles in the summer they would break down a lot faster. If I can get a couple of weeks with no rain I will burn some more wood scrap piles. 

 

AnnMarie did get to work on the back drip system. She got it roughed out but needs more one more trip to town for more zip ties, a zip tie gun and an automatic timer that can be outside in the weather. Of course no one has a zip tie gun. A whole stinking wall of every size zip tie but no gun to tighten and cut them expeditiously. We ordered plastic a couple of weeks ago. We would like to plant tomatoes and get them to actually grow. We need an extra 4-6 weeks to maximize our production. We keep ending up with lots of green tomatoes in the fall. We dropped a high low thermometer inside the plastic to see what our temperatures will be. 
 
I did come inside the house and remove all the floor trim and start getting ready for subfloor installation.  Tomorrow I will empty out the room and start laying subfloor. I would like to start laying tile by the end of the week.